Mechanical Responses and Fracture Mechanisms of Rock with Different Free Surfaces under the Chisel Pick Cutting

2021 ◽  
pp. 107635
Author(s):  
Zenghui Liu ◽  
Kai Liu ◽  
Zhengkuo Ma ◽  
Fusheng Ni ◽  
Lei Gu
Keyword(s):  
Fracture Mechanisms ◽  
Free Surfaces ◽  
Mechanical Responses

scholarly journals Cracking and Toughening Mechanisms in Nanoscale Metallic Multilayer Films: A Brief Review

2018 ◽  
Vol 8 (10) ◽  
pp. 1821 ◽  
Author(s):  
Qing Zhou ◽  
Yue Ren ◽  
Yin Du ◽  
Dongpeng Hua ◽  
Weichao Han
Keyword(s):  
Fracture Toughness ◽  
High Strength ◽  
Plastic Instability ◽  
Multilayer Films ◽  
Fracture Mechanisms ◽  
Toughening Mechanisms ◽  
Individual Layer ◽  
Practical Applications ◽  
Mechanical Responses ◽  
The Individual

Nanoscale metallic multilayer films (NMMFs) have captured scientific interests on their mechanical responses. Compared with the properties of monolithic films, multilayers possess unique high strength as the individual layer thickness reduces to the nanoscale, which is benefited from the plentiful hetero-interfaces. However, NMMFs always exhibit a low fracture toughness and ductility, which seriously hinders their practical applications. While there have been reviews on the strengthening and deformation mechanisms of microlaminate, rapid developments in nanotechnology have brought an urgent requirement for an overview focused on the cracking and toughening mechanisms in nanoscale metallic multilayers. This article provides an extensive review on the structure, standard methodology and fracture mechanisms of NMMFs. A number of issues about the crack-related properties of NMMFs have been displayed, such as fracture toughness, wear resistance, adhesion energy, and plastic instability. Taken together, it is hoped that this review will achieve the following two purposes: (1) introducing the size-dependent cracking and toughness performance in NMMFs; and (2) offer a better understanding of the role interfaces displayed in toughening mechanisms. Finally, we list a few questions we concerned, which may shed light on further development.

A method to measure pores and fissures in geologic materials under S.E.M. by digital image processing

1978 ◽  
Vol 36 (1) ◽  
pp. 212-213
Author(s):  
L. Montoto ◽  
M. Montoto ◽  
A. Bel-Lan
Keyword(s):  
Image Processing ◽  
Optical Microscopy ◽  
Digital Image Processing ◽  
Digital Image ◽  
Digital Processing ◽  
Free Surfaces ◽  
Geologic Materials ◽  
Automatic Information ◽  
Detector Output ◽  
Rock Specimens

INTRODUCTION.- The physical properties of rock masses are greatly influenced by their internal discontinuities, like pores and fissures. So, these need to be measured as a basis for interpretation. To avoid the basic difficulties of measurement under optical microscopy and analogic image systems, the authors use S.E.M. and multiband digital image processing. In S.E.M., analog signal processing has been used to further image enhancement (1), but automatic information extraction can be achieved by simple digital processing of S.E.M. images (2). The use of multiband image would overcome difficulties such as artifacts introduced by the relative positions of sample and detector or the typicals encountered in optical microscopy.DIGITAL IMAGE PROCESSING.- The studied rock specimens were in the form of flat deformation-free surfaces observed under a Phillips SEM model 500. The SEM detector output signal was recorded in picture form in b&w negatives and digitized using a Perkin Elmer 1010 MP flat microdensitometer.

Attractive mode force microscopy of chiral liquid crystal surfaces

1992 ◽  
Vol 50 (1) ◽  
pp. 268-269
Author(s):  
B.D. Terris ◽  
R. J. Twieg ◽  
C. Nguyen ◽  
G. Sigaud ◽  
H. T. Nguyen
Keyword(s):  
Liquid Crystal ◽  
Crystal Surfaces ◽  
Free Surfaces ◽  
Control Range ◽  
Force Microscopy ◽  
Liquid Crystal Films ◽  
Chiral Liquid Crystal ◽  
Crystal Films ◽  
Electrostatic Charging ◽  
And Shifts

We have used a force microscope in the attractive, or noncontact, mode to image a variety of surfaces. In this mode, the microscope tip is oscillated near its resonant frequency and shifts in this frequency due to changes in the surface-tip force gradient are detected. We have used this technique in a variety of applications to polymers, including electrostatic charging, phase separation of ionomer surfaces, and crazing of glassy films.Most recently, we have applied the force microscope to imaging the free surfaces of chiral liquid crystal films. The compounds used (Table 1) have been chosen for their polymorphic variety of fluid mesophases, all of which exist within the temperature control range of our force microscope.

Experimental study of the strength and durability of metal-composite high-pressure tanks

2019 ◽  
Vol 85 (1(I)) ◽  
pp. 49-56 ◽  
Author(s):  
A. M. Lepikhin ◽  
V. V. Moskvichev ◽  
A. E. Burov ◽  
E. V. Aniskovich ◽  
A. P. Cherniaev ◽  
...  
Keyword(s):  
High Pressure ◽  
Strain State ◽  
Full Scale ◽  
Fracture Mechanisms ◽  
Metal Composite ◽  
Test Results ◽  
Stress Strain ◽  
Pneumatic Pressure ◽  
Stress Strain State ◽  
Composite Tank

The results of unique experimental studies of the strength and service life of a metal-composite high-pressure tank are presented. The goal of the study is to analyze the fracture mechanisms and evaluate the strength characteristics of the structure. The methodology included tests of full-scale samples of the tank for durability under short-term static, long-term static and cyclic loading with internal pneumatic pressure. Generalized test results and data of visual measurements, instrumental and acoustic-emission control of deformation processes, accumulation of damages and destruction of full-scale tank samples are presented. Analysis of the strength and stiffness of the structure exposed to internal pneumatic pressure is presented. The types of limiting states of the tanks have been established experimentally. Change in the stress-strain state of the tank under cyclic and prolonged static loading is considered. Specific features of the mechanisms of destruction of a metal-composite tank are determined taking into account the role of strain of the metal liner. The calculated and experimental estimates of the energy potential of destruction and the size of the area affected upon destruction of the tank are presented. Analysis of test results showed that the tank has high strength and resource characteristics that meet the requirements of the design documentation. The results of the experiments are in good agreement with the results of numerical calculations and analysis of the stress-strain state and mechanisms of destruction of the metal-composite tank.

Improving the Organic Semiconductor- Metal Contact Interface in Printed High Performance Organic TFTs

2012 ◽  
Vol 1402 ◽  
Author(s):  
Kanan Puntambekar ◽  
Lisa Stecker ◽  
Kurt Ulmer ◽  
Themistokles Afentakis ◽  
Steven Droes
Keyword(s):  
Organic Semiconductor ◽  
High Performance ◽  
Thin Film Transistor ◽  
Device Performance ◽  
Organic Thin Film ◽  
Contact Interface ◽  
Organic Thin Film Transistor ◽  
Metal Electrodes ◽  
Free Surfaces ◽  
Gas Plasma

ABSTRACTOptimization of the interface between the organic semiconductor (OSC) & the source-drain (S/D) electrode is critical in order to improve organic thin film transistor (OTFT) device performance. This process typically involves coating the metal S/D electrodes with an optimal self-assembled thiol layer; a process that requires pristine metal surfaces for successful treatment. Obtaining contamination free surfaces can be challenging in the case of printed metal electrodes. Here we demonstrate an effective strategy to address this issue by introducing a brief low power forming gas plasma treatment prior to the surface coating step. We show a two orders of magnitude decrease in the contact resistance as a result of this treatment.

Sign in / Sign up

Export Citation Format

Share Document