Experimental research on combustion characteristics of coal gasification fly ash in a combustion chamber with a self-preheating burner

Fuel ◽  
2018 ◽  
Vol 215 ◽  
pp. 378-385 ◽  
Author(s):  
Ouyang Ziqu ◽  
Liu Wen ◽  
Zhu Jianguo ◽  
Liu Jingzhang ◽  
Man Chengbo
Fuel ◽  
2022 ◽  
Vol 314 ◽  
pp. 123086
Author(s):  
Xiaoyu Zhang ◽  
Shujun Zhu ◽  
Jianguo Zhu ◽  
Qinggang Lyu ◽  
Kai Wei ◽  
...  

2020 ◽  
Vol 04 ◽  
Author(s):  
Guohai Jia ◽  
Lijun Li ◽  
Li Dai ◽  
Zicheng Gao ◽  
Jiping Li

Background: A biomass pellet rotary burner was chosen as the research object in order to study the influence of excess air coefficient on the combustion efficiency. The finite element simulation model of biomass rotary burner was established. Methods: The computational fluid dynamics software was applied to simulate the combustion characteristics of biomass rotary burner in steady condition and the effects of excess air ratio on pressure field, velocity field and temperature field was analyzed. Results: The results show that the flow velocity inside the burner gradually increases with the increase of inlet velocity and the maximum combustion temperature is also appeared in the middle part of the combustion chamber. Conclusion: When the excess air coefficient is 1.0 with the secondary air outlet velocity of 4.16 m/s, the maximum temperature of the rotary combustion chamber is 2730K with the secondary air outlet velocity of 6.66 m/s. When the excess air ratio is 1.6, the maximum temperature of the rotary combustion chamber is 2410K. When the air ratio is 2.4, the maximum temperature of the rotary combustion chamber is 2340K with the secondary air outlet velocity of 9.99 m/s. The best excess air coefficient is 1.0. The experimental value of combustion temperature of biomass rotary burner is in good agreement with the simulation results.


Author(s):  
Arup Kumar Biswas ◽  
Wasu Suksuwan ◽  
Khamphe Phoungthong ◽  
Makatar Wae-hayee

Underground Coal Gasification (UCG) is thought to be the most favourable clean coal technology option from geological-engineering-environmental viewpoint (less polluting and high efficiency) for extracting energy from coal without digging it out or burning it on the surface. UCG process requires only injecting oxidizing agent (O2 or air with steam) as raw material, into the buried coal seam, at an effective ratio which regulates the performance of gasification. This study aims to evaluate the influence of equivalent ratio (ER) on the flow and combustion characteristics in a typical half tear-drop shape of UCG cavity which is generally formed during the UCG process. A flow modeling software, Ansys FLUENT is used to construct a 3-D model and to solve problems in the cavity. The boundary conditions are- (i) a mass-flow-inlet passing oxidizer (in this case, air) into the cavity, (ii) a fuel-inlet where the coal volatiles are originated and (iii) a pressure-outlet for flowing the product Syngas out of the cavity. A steady-state simulation has been run using k-? turbulence model. The mass flow rate of air varied according to an equivalent ratio (ER) of 0.16, 0.33, 0.49 and 0.82, while the fuel flow rate was fixed. The optimal condition of ER has been identified through observing flow and combustion characteristics, which looked apparently stable at ER 0.33. In general, the flow circulation mainly takes place around the ash-rubble pile. A high temperature zone is found at the air-releasing point of the injection pipe into the ash-rubble pile. This study could practically be useful to identify one of the vital controlling factors of gasification performance (i.e., ER impact on product gas flow characteristics) which might become a cost-effective solution in advance of commencement of any physical operation.


Author(s):  
Wasu Suksuwan ◽  
◽  
Mohd Faizal Mohideen Batcha ◽  
Arkom Palamanit ◽  
Makatar Wae-hayee ◽  
...  

Combustion of agricultural residues and wastes for energy applications is still popular. However, combustion of biomass with different shapes leads to many side effects such as agglomeration, emission and incomplete combustion. The aim of this study was therefore to investigate the effects of biomass shapes on combustion characteristics in an updraft combustion chamber. The rubber wood chip, coconut shell, oil palm empty fruit bunch, corn straw, rubber wood sawdust, and mixed palm cake were used as fuel and they were categorized as 3 shapes namely, chip shape, fiber shape, and powder shape. The biomass sample was combusted in simple cylindrical shape combustion chamber. The diameter of combustion chamber was 20 cm and its height was 160 cm. The biomass sample (moisture content below 20%) with amount of 1 kg was used to perform the experiment. The ambient air that had velocity of 0.50, 0.75 and 1.00 m/s (corresponding to an equivalence ratio of 1-3.5) was supplied to combustion chamber. The temperature at different positions along combustion chamber height and the properties of flue gases (carbon monoxide) were then measured. The results showed that the biomass shape had effect on combustion characteristics. Combustion of fiber shape biomass led to low combustion temperature, while the carbon monoxide in flue gases was high. This indicates the improper combustion process. The chip shape biomass was well combusted at a higher air velocity and the flue gases had lowest carbon monoxide. The highest combustion temperature was obtained from combustion of powder shape biomass. However, it led to the problem of unburned biomass such in case of sawdust. This is because the sawdust powder was carried from combustion chamber before burning completely.


Sign in / Sign up

Export Citation Format

Share Document