Failure mechanism and stability control of a large section of very soft roadway surrounding rock shear slip

2013 ◽  
Vol 23 (1) ◽  
pp. 127-134 ◽  
Author(s):  
Bo Meng ◽  
Hongwen Jing ◽  
Kunfu Chen ◽  
Haijian Su
Keyword(s):  
Failure Mechanism ◽  
Stability Control ◽  
Surrounding Rock ◽  
Large Section ◽  
Shear Slip

scholarly journals Stability Analysis of Surrounding Rock of Large Section Ultradeep Shaft Wall

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Cheng Li ◽  
Wang Chunlong ◽  
Wang Xi ◽  
Chen Kexu
Keyword(s):  
Control Method ◽  
Stress Test ◽  
Stability Control ◽  
Surrounding Rock ◽  
Main Shaft ◽  
Large Section ◽  
Masonry Construction ◽  
Temporary Support ◽  
The Stability ◽  
Shaft Wall

In order to study the stability of deep surrounding rock during the excavation of new main shaft in Xincheng gold mine, a construction method suitable for large section ultradeep shaft is proposed. A series of analyses were carried out in this study, including the in situ stress test, stress response of surrounding rock disturbance, deformation and failure characteristics, and numerical simulation. Based on the above analysis, the stability control method of surrounding rock in the process of deep excavation of the new main shaft is proposed. The results show that (1) the maximum principal stress of deep surrounding rock of new main shaft is horizontal stress, and the surrounding rock of the shaft has strong rock burst tendency after excavation; (2) the influence range of the deep shaft excavation disturbance is 6.4 times the shaft radius, in which the temporary support should be strengthened to avoid the influence of excavation disturbance on the stability of shaft wall rock; (3) the failure shape of surrounding rock of the deep shaft excavation was “ear” failure, and the failure depth was not more than 2.5 m; (4) after replacing the original “one-excavation and one-masonry” construction with “three-excavation and one-masonry” construction, the temporary support span of the main shaft was adjusted to 12 m, which can make the subsequent concrete shaft wall in the state of “no pressure bearing or slow low pressure bearing,” and the lining compressive safety coefficient was increased to 1.98, which meets the safety requirements.

Stability Control for Surrounding Rock of Undercrossing Subway Tunnels with Large Section and Small Clear Spacing

2021 ◽  
Author(s):  
Huaibao Chu ◽  
Chang Wang ◽  
Xiaolin Yang ◽  
Haixia Wei ◽  
Shaoyang Yan ◽  
...  
Keyword(s):  
Stability Control ◽  
Surrounding Rock ◽  
Large Section ◽  
Subway Tunnels

scholarly journals Stability Control of Surrounding Rock in Large-Section Weak- and Thick-Coal Open-cutting Roadway in Deep Mine

2019 ◽  
Vol 330 ◽  
pp. 032058
Author(s):  
Jihong Fan ◽  
Shibao Shen ◽  
Guangzhe Tao ◽  
Desheng Dai ◽  
Jilu Wu
Keyword(s):  
Stability Control ◽  
Surrounding Rock ◽  
Large Section ◽  
Deep Mine

Deformation Failure Analysis and Stability Control Technology of Large Section Soft Rock Chamber in Deep Coal Mine

2013 ◽  
Vol 353-356 ◽  
pp. 1035-1039
Author(s):  
Chang Hui An ◽  
Gui Bin Zhang ◽  
Zhi Da Liu ◽  
Kai Zhao ◽  
Wei Guo ◽  
...  
Keyword(s):  
Coal Mine ◽  
Soft Rock ◽  
Stability Control ◽  
Surrounding Rock ◽  
Mine Safety ◽  
Large Section ◽  
Deformation And Failure ◽  
Deep Coal Mine ◽  
Ground Pressure ◽  
The Impact

The chambers of certain coal mine in Shandong such as central substation situate in soft rock which consists of mudstone and fine sandstone, etc. Obvious ground pressure behaviors, large deformation and failure of surrounding rock have serious effect on mine safety production, with the impact of various complicated deep large ground pressure. This paper presents a rational scheme to control the surrounding rock steadily, based on analysis of deformation and failure on large section soft rock chamber, combined with the concept of the" combined supporting technology of long and short anchors" and "the combined supporting technology of three anchors".

scholarly journals Experimental analysis of control technology and deformation failure mechanism of inclined coal seam roadway using non-contact DIC technique

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xianyu Xiong ◽  
Jun Dai ◽  
Yibo Ouyang ◽  
Pan Shen
Keyword(s):  
Coal Seam ◽  
Failure Mechanism ◽  
Stability Control ◽  
Surrounding Rock ◽  
Image Correlation ◽  
Engineering Practice ◽  
Control Technology ◽  
Support Design ◽  
Deformation Control ◽  
Geological Conditions

AbstractThe deformation and failure forms of inclined coal seam roadway under the joint action of dip angle and various geological conditions are complex, and there is a lack of targeted support measures, which brings great problems to the stability control of roadway surrounding rock. In order to safely and economically mine inclined coal seams, taking the engineering geology of Shitanjing No. 2 mining area as the background, and the physical similarity model of right-angle trapezoidal roadway in inclined coal seam, in which the non-contact digital image correlation (DIC) technology and the stress sensor is employed to provide full-field displacement and stress measurements. The deformation control technology of the roadway surrounding rock was proposed, verified by numerical simulation and applied to engineering practice. The research results show that the stress and deformation failure of surrounding rock in low sidewall of roadway are greater than those in high sidewall, showing asymmetric characteristics, and the maximum stress concentration coefficients of roadway sidewall, roof and floor are 4.1, 3.4 and 2.8, respectively. A concept of roadway "cyclic failure" mechanism is proposed that is, the cyclic interaction of the two sidewalls, the sharp angles and roof aggravated the failure of roadway, resulting in the overall instability of roadway. The roadway sidewall is serious rib spalling, the roof is asymmetric "Beret" type caving arch failure, and the floor is slightly bulging. On this basis, the principle of roadway deformation control is revealed and asymmetric support design is adopted, and the deformation of roadway is controlled, which support scheme is effective.

scholarly journals Study on instability failure mode and monitoring early warning standard of surrounding rock in fully weathered argillaceous sandstone section of large section tunnel

2019 ◽  
Vol 136 ◽  
pp. 04023
Author(s):  
Ming Zhao ◽  
Ke Li ◽  
Hong Yan Guo ◽  
KaiCheng Hua
Keyword(s):  
Limit State ◽  
Stable State ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Large Section ◽  
Rock Stability ◽  
Geological Conditions ◽  
Construction Step ◽  
The Face ◽  
The Stability

Based on the special geological conditions of a tunnel in Qingyuan section of Huizhou-Zhanzhou Expressway, FLAC3d numerical simulation software is used to simulate the rheological properties and instability of surrounding rock in large-section fully weathered sandstone section, and the stability and loss of surrounding rock are analyzed. The deformation of the dome and the face at steady state is analyzed. It is found that: 1) when the surrounding rock is in a stable state, the deformation curve of the dome is smooth. When the surrounding rock of the face is unstable, the front of the face appears ahead. Deformation should be first strengthened on the surrounding rock in front of the face. 2) The arched foot is an important part of the instability of the surrounding rock. In order to prevent the expansion of the collapsed part, the arched part should be reinforced. 3) In order to obtain the limit state of surrounding rock stability, the strength of surrounding rock is reduced, and the strength reduction coefficient corresponding to the displacement sudden point is taken as the safety factor of rock stability around the hole, and the stability safety coefficients of surrounding rock of each construction step are greater than 1.2. 4) The dynamic standard values of deformation control in the whole construction stage are obtained by analyzing the deformation curves of each data monitoring point with time in the corresponding time period of each construction step.

Study on the Truss Support Technology for Coal Side in a Soft Broken Coal Roadway Under High Stress

2012 ◽  
Vol 524-527 ◽  
pp. 360-363
Author(s):  
Shou Yi Dong ◽  
Qi Tao Duan ◽  
Fu Lian He ◽  
Qi Li ◽  
Hong Jun Jiang
Keyword(s):  
Production Condition ◽  
High Stress ◽  
Field Investigation ◽  
Surrounding Rock ◽  
Theory Analysis ◽  
Large Section ◽  
Cable Channel ◽  
Coal Roadway ◽  
Measurement Results ◽  
Steel Truss

The coal side deformation and sliding can not be effectively controlled by use of the traditional bolt or cable support in the high stress crushed surrounding rock and large section roadway. For solving this problem, the new prestressed truss support technology is put forward, and its supporting principles of roof and two walls are stated. The mechanical model of cable-channel steel truss is established, and then the tensile strength of the cable and the maximum deflection of the channel steel are derived. By way of field investigation, mechanics theory analysis and actual production condition, the scheme is defined and applied in the replacement roadway. Measurement results of surrounding rock behavior show that the coal side displacement is no more than 254mm and the roof convergence is less than 172mm. Apparent economic and technical profits have been achieved.

scholarly journals Study of the Stability Control of the Rock Surrounding Double-Key Strata Recovery Roadways in Shallow Seams

2019 ◽  
Vol 2019 ◽  
pp. 1-21 ◽  
Author(s):  
Cheng Zhu ◽  
Yong Yuan ◽  
Zhongshun Chen ◽  
Zhiheng Liu ◽  
Chaofeng Yuan
Keyword(s):  
Engineering Application ◽  
Stability Control ◽  
Surrounding Rock ◽  
Control Effect ◽  
Pressure Relief ◽  
Support Design ◽  
Key Strata ◽  
Fracture Development ◽  
Surrounding Rock Control ◽  
The Stability

The stability control of the rock surrounding recovery roadways guarantees the safety of the extraction of equipment. Roof falling and support crushing are prone to occur in double-key strata (DKS) faces in shallow seams during the extraction of equipment. Therefore, this paper focuses on the stability control of the rock surrounding DKS recovery roadways by combining field observations, theoretical analysis, and numerical simulations. First, pressure relief technology, which can effectively release the accumulated rock pressure in the roof, is introduced according to the periodic weighting characteristics of DKS roofs. A reasonable application scope and the applicable conditions for pressure relief technology are given. Considering the influence of the eroded area on the roof structure, two roof mechanics models of DKS are established. The calculation results show that the yield load of the support in the eroded area is low. A scheme for strengthening the support with individual hydraulic props is proposed, and then, the support design of the recovery roadway is improved based on the time effects of fracture development. The width of the recovery roadway and supporting parameters is redesigned according to engineering experience. Finally, constitutive models of the support and compacted rock mass in the gob are developed with FLAC3D software to simulate the failure characteristics of the surrounding rock during pressure relief and equipment extraction. The surrounding rock control effects of two support designs and three extraction schemes are comprehensively evaluated. The results show that the surrounding rock control effect of Scheme 1, which combines improved support design and the bidirectional extraction of equipment, is the best. Engineering application results show that Scheme 1 realizes the safe extraction of equipment. The research results can provide a reference and experience for use in the stability control of rock surrounding recovery roadways in shallow seams.

scholarly journals Experimental Study on the Creep Characteristics of Coal Measures Sandstone under Seepage Action

Processes ◽  
2018 ◽  
Vol 6 (8) ◽  
pp. 110 ◽  
Author(s):  
Ziheng Sha ◽  
Hai Pu ◽  
Ming Li ◽  
Lili Cao ◽  
Ding Liu ◽  
...  
Keyword(s):  
Creep Deformation ◽  
Deformation Rate ◽  
Confining Pressure ◽  
Test System ◽  
Stability Control ◽  
Surrounding Rock ◽  
Natural State ◽  
Saturation State ◽  
Creep Characteristics ◽  
Coal Measures

The seepage action of underground water accelerates the deformation of roadway surrounding rock in deep mines. Therefore, the study of creep characteristics of surrounding rock under seepage action is the basis for the stability control of roadway surrounding rock in deep water-rich areas. In this paper, a seepage-creep coupling test system for complete rock samples was established. Combined with a scanning electron microscopy (SEM) test system, the seepage-creep law of coal measures sandstone and the damage mechanism were revealed. The study results showed that the maximum creep deformation of sandstone under natural and saturation state decreased gradually with the increase of confining pressure, and the maximum creep deformation under saturation state was greater than the corresponding value under natural state when the confining pressure was same. When the confining pressure was constant, the creep deformation, the constant creep deformation rate and the accelerated creep deformation rate of sandstone increased rapidly with the increase of infiltration pressure. With the change of time, the change of permeability parameters went through three cycles; each cycle was divided into two stages, slow change stage and rapid change stage, and the rate of variation increased with the increase of the seepage pressure. Based on the macroscopic and microscopic characteristics of sandstone rupture, the connection between macroscopic and microscopic mechanism on sandstone rupture was established. The results in this paper can provide a theoretical basis for stability control of roadway surrounding rock in water-rich areas.

scholarly journals Failure Characteristics and Mechanism of Multiface Slopes under Earthquake Load Based on PFC Method

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Tao Yang ◽  
Yunkang Rao ◽  
Huailin Chen ◽  
Bing Yang ◽  
Jiangrong Hou ◽  
...  
Keyword(s):  
Moisture Content ◽  
Failure Mechanism ◽  
Failure Modes ◽  
Shear Failure ◽  
Shaking Table ◽  
Tensile Failure ◽  
Particle Flow Code ◽  
Shear Cracks ◽  
Local Shear ◽  
Shear Slip

Understanding the failure mechanism and failure modes of multiface slopes in the Wenchuan earthquake can provide a scientific guideline for the slope seismic design. In this paper, the two-dimensional particle flow code (PFC2D) and shaking table tests are used to study the failure mechanism of multiface slopes. The results show that the failure modes of slopes with different moisture content are different under seismic loads. The failure modes of slopes with the moisture content of 5%, 8%, and 12% are shattering-shallow slip, tension-shear slip, and shattering-collapse slip, respectively. The failure mechanism of slopes with different water content is different. In the initial stage of vibration, the slope with 5% moisture content produces tensile cracks on the upper surface of the slope; local shear slip occurs at the foot of the slope and develops rapidly; however, a tensile failure finally occurs. In the slope with 8% moisture content, local shear cracks first develop and then are connected into the slip plane, leading to the formation of the unstable slope. A fracture network first forms in the slope with 12% moisture content under the shear action; uneven dislocation then occurs in the slope during vibration; the whole instability failure finally occurs. In the case of low moisture content, the tensile crack plays a leading role in the failure of the slope. But the influence of shear failure becomes greater with the increase of the moisture content.

Sign in / Sign up

Export Citation Format

Share Document