scholarly journals Study on instability failure mode and monitoring early warning standard of surrounding rock in fully weathered argillaceous sandstone section of large section tunnel

2019 ◽  
Vol 136 ◽  
pp. 04023
Author(s):  
Ming Zhao ◽  
Ke Li ◽  
Hong Yan Guo ◽  
KaiCheng Hua
Keyword(s):  
Limit State ◽  
Stable State ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Large Section ◽  
Rock Stability ◽  
Geological Conditions ◽  
Construction Step ◽  
The Face ◽  
The Stability

Based on the special geological conditions of a tunnel in Qingyuan section of Huizhou-Zhanzhou Expressway, FLAC3d numerical simulation software is used to simulate the rheological properties and instability of surrounding rock in large-section fully weathered sandstone section, and the stability and loss of surrounding rock are analyzed. The deformation of the dome and the face at steady state is analyzed. It is found that: 1) when the surrounding rock is in a stable state, the deformation curve of the dome is smooth. When the surrounding rock of the face is unstable, the front of the face appears ahead. Deformation should be first strengthened on the surrounding rock in front of the face. 2) The arched foot is an important part of the instability of the surrounding rock. In order to prevent the expansion of the collapsed part, the arched part should be reinforced. 3) In order to obtain the limit state of surrounding rock stability, the strength of surrounding rock is reduced, and the strength reduction coefficient corresponding to the displacement sudden point is taken as the safety factor of rock stability around the hole, and the stability safety coefficients of surrounding rock of each construction step are greater than 1.2. 4) The dynamic standard values of deformation control in the whole construction stage are obtained by analyzing the deformation curves of each data monitoring point with time in the corresponding time period of each construction step.

Monitoring and Reinforcement Technology of Passing Weak and Broken Rock Strata for Tunnel Boring Machine

2012 ◽  
Vol 204-208 ◽  
pp. 2819-2823
Author(s):  
Tao Li ◽  
Kai Bin Liu ◽  
Wei Hong Yang ◽  
Bo Liu ◽  
Ying Chao Liu
Keyword(s):  
Tunnel Boring Machine ◽  
Stability Control ◽  
Surrounding Rock ◽  
Tunnel Boring ◽  
Rock Stability ◽  
Tunnel Convergence ◽  
Geological Conditions ◽  
The Stability ◽  
Large Tunnel ◽  
Rock Strata

The stability control of surrounding rock is a relatively important problem in tunnel boring machine (TBM) construction. The tunnel convergence deformation value was monitored in field while TBM passing weak and broken section of hydraulic tunnel. The correlation between tunnel convergence and surrounding rock stability is analyzed. The monitoring results show that: the characteristic of weak and broken Strata is closely correlated with some geological conditions, such as fault development, intrusive contact of orthophyre and lamprophyre veins. These supporting measures can well ensure the stability of surrounding rock in weak and broken section, such as sealing the inverted arch by using concrete of C25,reinforcing the inverted arch by steel arch of I10 and anchor construction in the roof. There is great difference between the properties of the weak and broken rocks on both sides, which is the main reason of the large tunnel convergence deformation. The monitoring results can provide reference for similar engineering in the future.

Stability Analysis of Tunnel during the Excavation Based on ANSYS

2014 ◽  
Vol 577 ◽  
pp. 1135-1138
Author(s):  
Bing He ◽  
Guang Zhi Yin
Keyword(s):  
Numerical Simulation ◽  
Stability Analysis ◽  
Stress Condition ◽  
Stability Control ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Geological Condition ◽  
Rock Stability ◽  
Before And After ◽  
The Stability

This paper combines the geological condition of Miaoziwan tunnel and numerical simulation software ANSYS to analyze the displacement and stress condition of surrounding rock before and after the excavation. Furthermore, the stability of overlying rock in the tunnel was studied based on the displacement and stress condition of surrounding rock. The breaking law of overlying rock was studied considering the influencing factors to the stability of surrounding. The study and analysis to the breaking law of overlying rock can be helpful to the improvement of surrounding rock stability control and supporting system. Moreover, the result can be the guidance to the excavation.

Application of ABAQUS in Surrounding Rock Stability Analysis of Shallow Large Cross-Section Tunnel

2015 ◽  
Vol 777 ◽  
pp. 8-12 ◽  
Author(s):  
Lin Zhen Cai ◽  
Cheng Liang Zhang
Keyword(s):  
Numerical Simulation ◽  
Rock Mass ◽  
Strong Support ◽  
Surrounding Rock ◽  
Tunnel Engineering ◽  
Tunnel Excavation ◽  
Rock Stability ◽  
Rock Bolting ◽  
Excavation Support ◽  
The Stability

HuJiaDi tunnel construction of Dai Gong highway is troublesome, the surrounding-rock mass give priority to full to strong weathering basalt, surrounding rock integrity is poor, weak self-stability of surrounding rock, and tunnel is prone to collapse. In order to reduce disturbance, taking advantage of the ability of rock mass, excavation adopt the method of "more steps, short footage and strong support". The excavation method using three steps excavation, The excavation footage is about 1.2 ~ 1.5 m; The surrounding rock bolting system still produce a large deformation after completion of the first support construction, it shows that the adopted support intensity cannot guarantee the stability of the tunnel engineering. Using ABAQUS to simulate tunnel excavation support, optimizing the support parameters of the tunnel, conducting comparative analysis with Monitoring and Measuring and numerical simulation results, it shows that the displacement - time curves have a certain consistency in numerical simulation of ABAQUS and Monitoring and Measuring.

scholarly journals Study on the Instability Characteristics and Bolt Support in Deep Mining Roadways Based on the Surrounding Rock Stability Index: Example of Pansan Coal Mine

2020 ◽  
Vol 2020 ◽  
pp. 1-16 ◽  
Author(s):  
Jucai Chang ◽  
Kai He ◽  
Zhiqiang Yin ◽  
Wanfeng Li ◽  
Shihui Li ◽  
...  
Keyword(s):  
Coal Mine ◽  
Stability Index ◽  
Surrounding Rock ◽  
Full Length ◽  
Control Effect ◽  
Support Design ◽  
Rock Stability ◽  
Working Face ◽  
The Stability ◽  
Bolt Support

In view of the influence of mining stress on the stability of the surrounding rock of inclined roof mining roadways in deep mines, the surrounding rock stability index is defined and solved based on the rock strength criterion and the stress distribution. The mining roadway of the 17102(3) working face of the Pansan Coal Mine is used as the engineering background and example. The surrounding rock’ stabilities under the conditions of no support and bolt support are analyzed according to the surrounding rock’s stability index and the deformation data. The results show that the areas of low wall and high wall instability are 1.68 m2 and 2.12 m2, respectively, and the low wall is more stable than the high wall; the areas of the roof and floor instability are 0.33 m2 and 0.35 m2, respectively, and the roof and floor are more stable than the two sides. During mining, the area of instability greatly increases at first, then decreases to 0, and reaches a maximum value at the peak of the abutment pressure. The stability of the surrounding rock decreases first and then increases. Compared with the end anchoring bolt support, the full-length anchoring bolt support reduces the area of instability to a greater extent, and the full-length anchoring bolt support effect is better. The surrounding rock in the end anchoring zone and the full-length anchoring zone began to deform significantly at 200 m and 150 m from the working face, respectively. This indicates that the control effect of the full-length anchoring bolt support is better and verifies the rationality of the surrounding rock stability index to describe the instability characteristics. This research method can provide a theoretical reference for analysis of the stability characteristics and support design of different cross-section roadways.

scholarly journals Study on Stability of Round Tunnel Surrounding Rock

2018 ◽  
Vol 175 ◽  
pp. 04016
Author(s):  
NIU Yan ◽  
Ji Yafei ◽  
Wang Zhao
Keyword(s):  
Evaluation Criteria ◽  
Surrounding Rock ◽  
Rock Stress ◽  
Stress Release ◽  
Circular Tunnel ◽  
Tunnel Excavation ◽  
Finite Element Software ◽  
Rock Stability ◽  
The Stability ◽  
Surrounding Rock Stress

Tunnel excavation will lead to the immediate surrounding rock unloading caused by the surrounding rock stress release, the stability of the surrounding rock have a certain impact. In this paper, finite element software ANSYS and finite difference software FLAC3D are used to simulate the excavation and lining process of circular tunnel. The influence of excavation on the rock stability around circular tunnel is analyzed, and the effect of applying lining on the stability of surrounding rock is analyzed. Evaluation criteria selection hole displacement, stress and plastic area of three factors.

Mechanics Analysis of Grade V Surrounding Rock Primary Support in Maanziliang Tunnel

2012 ◽  
Vol 164 ◽  
pp. 414-417
Author(s):  
Jia Ming Han
Keyword(s):  
Finite Element ◽  
Safety Factor ◽  
Surrounding Rock ◽  
Qinling Mountains ◽  
The Finite Element Method ◽  
Highway Tunnel ◽  
Geological Conditions ◽  
The Stability ◽  
Primary Support ◽  
Rock Section

Commonly used finite element strength reduction to calculate the safety factor of slope，to analyze the stability of the slope[1～3]. Recently it also proposed the methods to evaluate the safety factor for the stability of surrounding rock of underground chambers and supporting structural mechanics[4～6]. For Qinling Mountains of the complex geological conditions in the Maanziliang highway tunnel, this article use the finite element method from the bolt resist tension, bolt length, the force of sprayed layer of concrete to computing gradeⅤsurrounding rock section of primary support safety factor, to give evaluation to support mechanics of the Maanziliang tunnel.

Research on Mining Technological Parameters of 7# Thin Coal Seam in Liuquan Mine

2012 ◽  
Vol 629 ◽  
pp. 937-942
Author(s):  
Dong Sheng Zhang ◽  
Xu Feng Wang ◽  
Yang Zhang ◽  
Jin Liang Wang
Keyword(s):  
Coal Seam ◽  
Distinct Element ◽  
Horizontal Displacement ◽  
Simulation Software ◽  
Surrounding Rock ◽  
Technological Parameters ◽  
Thin Coal Seam ◽  
Geological Conditions ◽  
Universal Distinct Element Code ◽  
Distinct Element Code

Aimed at the specific geological conditions of 7# thin coal seam in Liuquan Mine, this paper used the methods of numerical calculation and theoretical analysis to determine the reasonable technological parameters of high-grade conventional mining face. The numerical simulation software of UDEC (Universal Distinct Element Code) was used to contrast and analyse the characteristics of surrounding rock stress distribution and overlying rock horizontal displacement under the condition of different length of coalface, then it was indicated that the surrounding rock deformation was less when length of coalface was 110 m which was advantageous for roof control; according to the conditions of roof and floor, the roof support strength was being calculated systematically to determine the row space of props being 700×1200 mm; the main equipments of coalface was assorted, and reasonable work manner in coalface and gob processing measure was put forward, which provided guidance for efficient mining in thin coal seam.

scholarly journals The Stability of Gob-Side Entry Retaining in a High-Gas-Risk Mine

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Junwen Zhang ◽  
Yulin Li
Keyword(s):  
Coal Mines ◽  
Surrounding Rock ◽  
Shanxi Province ◽  
Engineering Practice ◽  
Efficient Production ◽  
Coal Recovery ◽  
Working Face ◽  
Geological Conditions ◽  
The Stability ◽  
Strengthening Technique

There are series of problems faced by most of the coal mines in China, ranging from low-coal recovery rate and strained replacement of working faces to gas accumulation in the upper corner of coalfaces. Based on the gob-side entry retaining at the No. 18205 working face in a coal mine in Shanxi Province, theoretical analysis, numerical simulation, and engineering practice were comprehensively used to study the mechanical characteristics of the influence of the width of the filling body beside the roadway and the stability of surrounding rock in a high-gas-risk mine. The rational width of the filling body beside the roadway was determined, and a concrete roadway-side support with a headed reinforcement-integrated strengthening technique was proposed, which have been applied in engineering practice. The stability of the filling body beside the roadway is mainly influenced by the movement of the overlying rock strata, and the stability of the surrounding rock can be improved effectively by rationally determining the width of the filling body beside the roadway. When the width of the roadway-side filling body is 2.5 m, the surrounding rock convergence of the gob-side entry retaining is relatively small at only 5% of the convergence ratio. It has been shown that the figure for roof separation is relatively low, and strata behaviors are relatively alleviated and gas density do not exceed the limit, which are the best results of gob-side entry retaining. The results of this research can provide theoretical guidance for excavation of coal mines with similar geological conditions and have some referential significance to safety and efficient production in coal mines.

Analysis of Seepage Field of Highway Tunnel Excavation by Finite Difference Method

2014 ◽  
Vol 638-640 ◽  
pp. 798-803
Author(s):  
Yong Tao Zhang
Keyword(s):  
Finite Difference ◽  
Circulatory System ◽  
Surrounding Rock ◽  
Design Parameters ◽  
Seepage Field ◽  
Tunnel Excavation ◽  
Highway Tunnel ◽  
Geological Conditions ◽  
Fracture Development ◽  
The Stability

As the excavation of tunnels, there are new channels of the groundwater drainage. The original supply of the circulatory system has been destroyed. The effects of groundwater to rock mass of surrounding rock are aggravated. In this paper, combined with a new highway tunnel project, the model is built according to the design parameters and the site engineering geological conditions of the tunnel. The fluid-structure interaction module of the finite difference software FLAC3D is used for the research on tunnel excavation. The distribution of seepage field, the stability of surrounding rock and rock deformation under saturated conditions during the tunnel excavation have been analyzed. The simulation results have certain guiding meaning on fracture development, the stability design of tunnels in water-rich stratum and the design and construction of anti-drainage.

Research on Surrounding Rock Stability by Ideal Point-Rough Set Efficacy Coefficient Method

2013 ◽  
Vol 353-356 ◽  
pp. 415-420 ◽  
Author(s):  
Guo Ren Lu ◽  
Le Wen Zhang ◽  
Dao Hong Qiu ◽  
Xiao Feng
Keyword(s):  
Stability Analysis ◽  
Rough Set ◽  
Ideal Point ◽  
Surrounding Rock ◽  
Ideal Solution ◽  
Rock Stability ◽  
The Stability ◽  
Efficacy Coefficient Method ◽  
Coefficient Method ◽  
The Ideal

The ideal point method is a kind of multiple-goal decision analysis method, the basic idea is to construct the ideal and anti-ideal solution of multi attribute problem, with degree that near ideal solution and away from the anti-ideal solution as the basis to judge each evaluation object. Based on the basic principle of ideal point method, and comprehensive consideration of the actual geological conditions of Qingdao metro, we selected rock compressive strength, integrity coefficient, structure surface behavior, groundwater and softening coefficient as the evaluation factors of surrounding rock stability, and used the rough set theory to determine the index weight. At last, established the evaluate model for the surrounding rock stability of metro based on the rough set efficacy coefficient method. The research show that the stability analysis results are consistent with the actual excavation, so using rough set efficacy coefficient method to analysis surrounding rock stability of Qingdao Metro is feasible, which provides a new idea for the stability analysis of surrounding rock.

Sign in / Sign up

Export Citation Format

Share Document