scholarly journals Preparation of nickel and Ni3Sn nanoparticles via extension of conventional citric acid and ethylene diamine tetraacetic acid mediated sol–gel method

2016 ◽  
Vol 668 ◽  
pp. 159-168 ◽  
Author(s):  
Pingyun Li ◽  
Guodong Deng ◽  
Xiaode Guo ◽  
Hongying Liu ◽  
Wei Jiang ◽  
...  
2015 ◽  
Vol 740 ◽  
pp. 3-6
Author(s):  
Guo Yuan Cheng ◽  
Xing Hua Fu ◽  
Xin Jin ◽  
Wen Hong Tao ◽  
Yu Qin Qiang

KNN-BF piezoelectric ceramics synthesized by sol-gel method in this experiment. By controlling bismuth and iron content in the system to study effects of them. We selected citric acid as metal chelator and ethylene glycol as esterification agent. PH maintained 5-6 during preparation of the sol. Sintering temperature of ceramic selected 1100°C. Preparation ceramics under these conditions and comparative analysis, the structure of ceramics is single perovskite and shap of crystals are square block. With the increase of x, properties of ceramics firstly increases and then decreases: d33, εr, Qm, Kpreaching the maximum, values of them were 136pC/N, 630(f =1KHz), 212, 0.41 respectively; dielectric loss to minimum is 0.07(f =1KHz); at this point, ceramics had best performance.


2014 ◽  
Vol 91 ◽  
pp. 19-23
Author(s):  
Plamen Pashev ◽  
Rositsa Raykova ◽  
Yancho Hristov ◽  
Bogdan Bogdanov

The study presented deal with preparation of batches of the system Y-Ba-Cu-O using sol-gel method and citric acid as precursor. Batches with particle size of 100 nm containing each of the phases Y123 and Y211 were prepared. The stoichiometric amounts of Y, Ba and Cu oxides were dissolved in 65% HNO3 until clear blue solution was observed under heating to 80 ̊С. The nitrate solutions obtained were neutralized to pH = 6 with 25% solution of NH3 (p.a.), then С6Н8О7 was added as the gels obtained were thermally treated. The transformation processes taking place under change of temperature were studied by IR, XRD, DTA and SEM.


2020 ◽  
Vol 44 (23) ◽  
pp. 9813-9821
Author(s):  
H. Issaoui ◽  
A. Benali ◽  
M. Bejar ◽  
E. Dhahri ◽  
R. F. Santos ◽  
...  

Perovskite (La0.8Ca0.2)1−xBixFeO3 compounds were synthesized by sol–gel method using the citric acid route and sintered at 800 °C and 900 °C. LCBFO 800 series has the smallest size of crystallites, a larger magnetization and a smaller Curie temperature.


RSC Advances ◽  
2016 ◽  
Vol 6 (113) ◽  
pp. 112620-112624 ◽  
Author(s):  
Zhiyi Zhang ◽  
Qiuyue Gao ◽  
Haibo Gao ◽  
Zhenyu Shi ◽  
Junwei Wu ◽  
...  

Monolithic NiO aerogels were prepared by a facile citric acid assisted sol–gel method for supercapacitor electrodes.


Author(s):  
Nguyen Anh Tien ◽  
Bui Xuan Vuong ◽  
Nguyen Tuan Loi

In this study, HoFeO3 nanomaterials with very small particle sizes (< 50 nm) were synthesized using citric acid sol-gel method through hydrolysis of Ho3+ and Fe3+ cations in hot water. Single-phase HoFeO3 was generated after calcination of the as-prepared powder at 750 and 850°C during 1 hour. The UV-Vis spectra at room temperature presented strong areas absorption in the range of 300 ÷ 600 nm with small band gap energy (Eg = 1.93÷2.25 eV). The obtained HoFeO3 nanomaterials exhibited a soft ferromagnetic behaviour with a magnetic coercivity of 33.2 OE.


Sign in / Sign up

Export Citation Format

Share Document