Adsorption rate of phenol from aqueous solution onto organobentonite: Surface diffusion and kinetic models

2011 ◽  
Vol 364 (1) ◽  
pp. 195-204 ◽  
Author(s):  
Raul Ocampo-Perez ◽  
Roberto Leyva-Ramos ◽  
Jovita Mendoza-Barron ◽  
Rosa M. Guerrero-Coronado
2018 ◽  
Author(s):  
yongson hong ◽  
Kye-Ryong Sin ◽  
Jong-Su Pak ◽  
Chol-Min Pak

<p><b>In this paper, the deficiencies and cause of previous adsorption kinetic models were revealed, new adsorption rate equation has been proposed and its validities were verified by kinetic analysis of various experimental data.</b> <b>This work is a new view on the adsorption kinetics rather than a comment on the previous adsorption papers.</b></p>


1981 ◽  
Vol 14 (1) ◽  
pp. 73-75 ◽  
Author(s):  
HIROYUKI KAGE ◽  
IKUYA HASHIZUME ◽  
MORIO OKAZAKI ◽  
RYOZO TOEI

2010 ◽  
Vol 2 (2) ◽  
pp. 107-112
Author(s):  
Nuryono Nuryono ◽  
Narsito Narsito

In this research, treatment of diatomaceous earth, Sangiran, Central Java using hydrogen chloride (HCl) and sulfuric acid (H2SO4) on kinetics of Cd(II) adsorption in aqueous solution has been carried out. The work was conducted by mixing an amount of grounded diatomaceous earth (200 mesh in size) with HCl or H2SO4 solution in various concentrations for two hours at temperature range of 100 - 150oC. The mixture was then filtered and washed with water until the filtrate pH is approximately 7 and then the residue was dried for four hours at a temperature of 70oC. The product was used as an adsorbent to adsorb Cd(II) in aqueous solution with various concentrations. The Cd(II) adsorbed was determined by analyzing the rest of Cd(II) in the solution using atomic absorption spectrophotometry. The effect of treatment was evaluated from kinetic parameter of adsorption rate constant calculated based on the simple kinetic model. Results showed  that before equilibrium condition reached, adsorpstion of Cd(II) occurred through two steps, i.e. a step tends to follow a reaction of irreversible first order  (step I) followed by reaction of reversible first order (step II). Treatment with acids, either hydrogen chloride or sulfuric acid, decreased adsorption rate constant for the step I from 15.2/min to a range of 6.4 - 9.4/min.  However, increasing concentration of acid (in a range of concentration investigated) did not give significant and constant change of adsorption rate constant. For step II process,  adsorption involved physical interaction with the sufficient low adsorption energy (in a range of 311.3 - 1001 J/mol).     Keywords: adsorption, cdmium, diatomaceous earth, kinetics.


1999 ◽  
Vol 39 (10-11) ◽  
pp. 225-230 ◽  
Author(s):  
Jong-Nan Chen ◽  
Yi-Chin Chan ◽  
Ming-Chun Lu

The decomposition of chlorophenols in aqueous solution with UV-illuminated TiO2 suspensions in the presence of manganese ions was studied. It was found that the removal rate of chlorophenols would be the highest at pH 3 in the presence of 1.18×10−4 M manganese ion. The effect of ionic strength on the 2-CP decomposition can be ignored in the range from 0.1 to 0.005 M for NaClO4. This study is also to explore the relationship between the adsorption rate and reaction rate. Results showed that the more the adsorption rate the more the decomposition rate for the three chlorophenols. Manganese ions can increase the photocatalytic oxidation of 2-chlorophenol in terms of DOC. The relationship between temperature and reaction rate for 2-CP is k = 0.0043T - 1.2146.


2017 ◽  
Vol 6 (1) ◽  
pp. 148-156
Author(s):  
P. Indhumathi ◽  
S. Sathiyaraj ◽  
U. S. Shoba ◽  
P. S. Syed Shabudeen ◽  
C. Jayabalakrishnan

Adsorption is a unique process for the removal of pollutants from water and wastewater since the process is cost effective, easily adoptable and environmentally compatible. The micro algae are a promising way to produce a useful adsorbent for Thorium (VI) removal from aqueous solution. The specific surface area of the microalgae was determined and its properties studied by scanning electron microscopy (SEM). Adsorptive removal of Thorium (VI) from aqueous solution on micro algae has been studied under varying conditions of agitation time, metal ion concentration, adsorbent dose and pH to assess the kinetic and equilibrium parameters. Adsorption equilibrium was obtained in 120 min for 20 to 120 mg/L of Thorium (VI) concentrations. The Langmuir, Freundlich, Temkin, Redlich-Peterson isotherm models, kinetic models and thermodynamic models were found to provide an excellent fitting of the adsorption data. The adsorption capacity of thorium 91.73% maximum percent removal in thorium at pH 3. This adsorbent was found to be effective and economically attractive.


Sign in / Sign up

Export Citation Format

Share Document