Colorimetric assay for the detection of dopamine using bismuth ferrite oxide (Bi2Fe4O9) nanoparticles as an efficient peroxidase-mimic nanozyme

Author(s):  
Mehri Razavi ◽  
Alexandre Barras ◽  
Majdid Ifires ◽  
Abir Swaidan Resource ◽  
Maryam Khoshkam ◽  
...  
2018 ◽  
Vol 1 (2) ◽  
pp. 382-388 ◽  
Author(s):  
Junning Wang ◽  
Xue Yang ◽  
Tianxiang Wei ◽  
Jianchun Bao ◽  
Qinshu Zhu ◽  
...  

Sensors ◽  
2016 ◽  
Vol 16 (4) ◽  
pp. 465 ◽  
Author(s):  
Ying Tong ◽  
Xiangyu Jiao ◽  
Hankun Yang ◽  
Yongqiang Wen ◽  
Lei Su ◽  
...  

2021 ◽  
Author(s):  
Chen Hou ◽  
Linhui Fu ◽  
Yang Wang ◽  
Wenqiang Chen ◽  
Fang Chen ◽  
...  

Abstract Rapid and accurate detection of phenolic wastewater from industries has created global concern. Herein, core-shell magnetic cellulose nanocrystals supported MOF (Fe3O4/CNC@ZIF-8) with robust peroxidase-like activity was synthesized with tannic acid as modifier and bridge. The peroxidase-mimic catalytic activity of as-prepared Fe3O4/CNC@ZIF-8 was further investigated using o-phenylenediamine (OPD) as peroxidase substrates in the presence of H2O2. Moreover, the experimental conditions were optimized and the kinetic analysis results showed that Fe3O4/CNC@ZIF-8 had higher affinity towards both the substrate OPD and H2O2 than horseradish peroxidase (HRP). Finally, a phenol colorimetric assay with a linear range of 2-200 µM and a detection limit of 0.316 µM was constructed. The catalytic mechanism of Fe3O4/CNC@ZIF-8 with phenol was further investigated by fluorescence test and the generated •OH was proved to act a crucial role to produce quinoid radicals. Additionally, the synthesized magnetic material had excellent stability and recyclability and ease to separation. These results suggest that the Fe3O4/CNC@ZIF-8 may be one of the promising candidates as peroxidase mimic for colorimetric detection of phenol.


2019 ◽  
Author(s):  
Ayesha Tariq ◽  
M. Abdullah Iqbal ◽  
S. Irfan Ali ◽  
Muhammad Z. Iqbal ◽  
Deji Akinwande ◽  
...  

<p>Nanohybrids, made up of Bismuth ferrites/Carbon allotropes, are extensively used in photocatalytic applications nowadays. Our work proposes a nanohybrid system composed of Bismuth ferrite nanoparticles with two-dimensional (2D) MXene sheets namely, the BiFeO<sub>3</sub> (BFO)/Ti<sub>3</sub>C<sub>2</sub> (MXene) nanohybrid for enhanced photocatalytic activity. We have fabricated the BFO/MXene nanohybrid using simple and low cost double solvent solvothermal method. The SEM and TEM images show that the BFO nanoparticles were attached onto the MXene surface and in the inter-layers of two-dimensional (2D) MXene sheets. The photocatalytic application is tested for the visible light irradiation which showed the highest efficiency among all pure-BFO based photocatalysts, i.e. 100% degradation in 42 min for organic dye (Congo Red) and colorless aqueous pollutant (acetophenone) in 150 min, respectively. The present BFO-based hybrid system exhibited the large surface area of 147 m<sup>2</sup>g<sup>-1</sup>measured via Brunauer-Emmett-Teller (BET) sorption-desorption technique, and is found to be largest among BFO and its derivatives. Also, the photoluminescence (PL) spectra indicate large electron-hole pair generation. Fast and efficient degradation of organic molecules is supported by both factors; larger surface area and lower electron-hole recombination rate. The BFO/MXene nanohybrid presented here is a highly efficient photocatalyst compared to other nanostructures based on pure BiFeO<sub>3</sub> which makes it a promising candidate for many future applications.</p>


1995 ◽  
Vol 31 (5-6) ◽  
pp. 47-49 ◽  
Author(s):  
C. Ash ◽  
C. MacKintosh ◽  
R. MacKintosh ◽  
C. R. Fricker

A new colorimetric assay is described, based on inhibition of protein phosphotases, that enables the rapid, simple and sensitive determination of the concentration of toxins from cyanobacteria.


2020 ◽  
Vol 17 (11) ◽  
pp. 1380-1392
Author(s):  
Emine Merve Güngör ◽  
Mehlika Dilek Altıntop ◽  
Belgin Sever ◽  
Gülşen Akalın Çiftçi

Background: Akt is overexpressed or activated in a variety of human cancers, including gliomas, lung, breast, ovarian, gastric and pancreatic carcinomas. Akt inhibition leads to the induction of apoptosis and inhibition of tumor growth and therefore extensive efforts have been devoted to the discovery of potent antitumor drugs targeting Akt. Objectives: The objective of this work was to identify potent anticancer agents targeting Akt. Methods: New hydrazone derivatives were synthesized and investigated for their cytotoxic effects on 5RP7 H-ras oncogene transformed rat embryonic fibroblast and L929 mouse embryonic fibroblast cell lines. Besides, the apoptotic effects of the most active compounds on 5RP7 cell line were evaluated using flow cytometry. Their Akt inhibitory effects were also investigated using a colorimetric assay. In silico docking and Absorption, Distribution, Metabolism and Excretion (ADME) studies were also performed using Schrödinger’s Maestro molecular modeling package. Results and Discussion: Compounds 3a, 3d, 3g and 3j were found to be effective on 5RP7 cells (with IC50 values of <0.97, <0.97, 1.13±0.06 and <0.97 μg/mL, respectively) when compared with cisplatin (IC50= 1.87±0.15 μg/mL). It was determined that these four compounds significantly induced apoptosis in 5RP7 cell line. Among them, N'-benzylidene-2-[(4-(4-methoxyphenyl)pyrimidin- 2-yl)thio]acetohydrazide (3g) significantly inhibited Akt (IC50= 0.5±0.08 μg/mL) when compared with GSK690693 (IC50= 0.6±0.05 μg/mL). Docking studies suggested that compound 3g showed good affinity to the active site of Akt (PDB code: 2JDO). According to in silico ADME studies, the compound also complies with Lipinski's rule of five and Jorgensen's rule of three. Conclusion: Compound 3g stands out as a potential orally bioavailable cytotoxic agent and apoptosis inducer targeting Akt.


2020 ◽  
Vol 16 (5) ◽  
pp. 793-804
Author(s):  
Naimeh Mahheidari ◽  
Jamal Rashidiani ◽  
Hamid Kooshki ◽  
Khadijeh Eskandari

Background: Today, nanoparticles hold great promise in biomedical researches and applications including bacteria detection. The rapid and sensitive outcomes of bacteria detection strategies using nanoparticle conjugates become determinative, especially in bacterial outbreaks. In the current research, we focused on detecting V. cholera bacteria and its toxin using a thiocyanate/Au nanoparticle. Thiocyanate adsorbed strongly on the surface of gold nanoparticles and changed the surface by enhancing surface plasmon resonance of gold nanoparticles. Objective: This method is tried to introduce a simple and fast procedure to assay vibrio cholera. So, it is observed by the naked eyes as well. Methods: We used two antibodies (Ab) for V. cholera detection: a) a primary antibody conjugated to magnetic nanoparticles (MNPs) for trapping V. cholera bacterial cells, and b) a secondary Abconjugated thiocyanate-GNPs as a colorimetric detector. Then, an immuno-magnetic separation system connected to a colorimetric assay was designed based on the GNPs. The results were measured by ultraviolet-visible (UV-Vis) spectroscopy. Results: The results showed that gold nanoparticles are an appropriate optical assay for detecting biological samples in a minimum concentration and also it can be easily seen by the naked eyes. The linear range of this biosensor is 3.2×104 to 28×104 cells per ml. Conclusion: In this research, a colorimetric immune assay based on gold nanoparticles was designed to improve the sensitivity of V. cholera detection. Also, this method can be used for the detection of other biological agents.


2020 ◽  
Vol 16 (5) ◽  
pp. 816-828
Author(s):  
Gurdeep Rattu ◽  
Nishtha Khansili ◽  
Prayaga M. Krishna

Background: Cerium oxide nanoparticles (nanoceria) are efficient free-radical scavengers due to their dual valence state and thus exhibit optical and catalytic properties. Therefore, the main purpose of this work was to understand the peroxidase mimic activity of polymer-stabilized nanoceria for enzyme-less H2O2 sensing by fluorescence spectrometer. Objective: This research revealed the development of fluorescence hydrogen peroxide nanosensor based on the peroxidase-like activity of polyacrylic acid stabilized nanoceria (PAA-CeO2 Nps). Methods: PAA-CeO2 Nps were synthesized by simple cross-linking reaction at a low temperature and characterized by XRD, SEM, Zeta potential, TGA, FT-IR and UV-VIS spectroscopic analysis. H2O2 sensing was performed by a fluorescence spectrometer. Results:: The synthesized polymer nanocomposite was characterized by XRD, SEM, TGA, FT-IR and UV-VIS spectroscopic analysis. The XRD diffraction patterns confirmed the polycrystalline nature and SEM micrograph showed nanoparticles having hexagonal symmetry and crystallite size of 32 nm. The broad peak of Ce–O bond appeared at 508 cm-1. UV-VIS measurements revealed a welldefined absorbance peak around 315 nm and an optical band-gap of 3.17 eV. As synthesized PAACeO2 Nps effectively catalysed the decomposition of hydrogen peroxide (H2O2) into hydroxyl radicals. Then terephthalic acid was oxidized by hydroxyl radical to form a highly fluorescent product. Under optimized conditions, the linear range for determination of hydrogen peroxide was 0.01 - 0.2 mM with a limit of detection (LOD) of 1.2 μM. Conclusion: The proposed method is ideally suited for the sensing of H2O2 at a low cost and this detection system enabled the sensing of analytes (sugars), which can enzymatically generate hydrogen peroxide.


Molecules ◽  
2019 ◽  
Vol 24 (16) ◽  
pp. 2925 ◽  
Author(s):  
Arianna Ricci ◽  
Giuseppina Paola Parpinello ◽  
Nemanja Teslić ◽  
Paul Andrew Kilmartin ◽  
Andrea Versari

Twenty commercially available oenological tannins (including hydrolysable and condensed) were assessed for their antiradical/reducing activity, comparing two analytical approaches: The 2,2-diphenyl-1-picrylhydrazyl (DPPH•) radical scavenging spectrophotometric assay and the cyclic voltammetry (CV) electrochemical method. Electrochemical measurements were performed over a −200 mV–500 mV scan range, and integrated anodic currents to 500 mV were used to build a calibration graph with (+)-catechin as a reference standard (linear range: From 0.0078 to 1 mM, R2 = 0.9887). The CV results were compared with the DPPH• assay (expressed as % of radical scavenged in time), showing high correlation due to the similarity of the chemical mechanisms underlying both methods involving polyphenolic compounds as reductants. Improved correlation was observed by increasing the incubation time with DPPH• to 24 h (R2 = 0.925), demonstrating that the spectrophotometric method requires a long-term incubation to complete the scavenging reaction when high-molecular weight tannins are involved; this constraint has been overcome by using instant CV measurements. We concluded that the CV represents a valid alternative to the DPPH• colorimetric assay, taking advantage of fast analysis and control on the experimental conditions and, because of these properties, it can assist the quality control along the supply chain.


Sign in / Sign up

Export Citation Format

Share Document