Influence of injection timing on performance and combustion characteristics of compression ignition engine working on quaternary blends of diesel fuel, mixed biodiesel, and t-butyl peroxide

2021 ◽  
pp. 130160
Author(s):  
Swarup Kumar Nayak ◽  
Sandro Nižetić ◽  
Van Viet Pham ◽  
ZuoHua Huang ◽  
Aykut I. Ölçer ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Combustion Characteristics ◽  
Injection Timing ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Butyl Peroxide

Parametric study of combustion characteristics in a direct-injection diesel homogeneous charge compression ignition engine with a low-pressurefuel injector

2005 ◽  
Vol 6 (3) ◽  
pp. 215-230 ◽  
Author(s):  
Y Ra ◽  
E J Hruby ◽  
R D Reitz
Keyword(s):  
Numerical Simulations ◽  
Diesel Fuel ◽  
Homogeneous Charge Compression Ignition ◽  
Direct Injection ◽  
Low Pressure ◽  
Combustion Characteristics ◽  
Compression Ignition ◽  
Fuel Injector ◽  
Compression Ignition Engine ◽  
Homogeneous Charge

Homogeneous charge compression ignition (HCCI) combustion is an alternative to current engine combustion systems and is used as a method to reduce emissions. It has the potential nearly to eliminate engine-out NOx emissions while producing diesel-like engine efficiencies, when a premixture of gas-phase fuel and air is burned spontaneously and entirely by an autoignition process. However, when direct injection is used for diesel fuel mixture preparation in engines, the complex in-cylinder flow field and limited mixing times may result in inhomogeneity of the charge. Thus, in order to minimize non-uniformity of the charge, early injection of the fuel is desirable. However, when fuel is injected during the intake or early compression stroke, the use of high-pressure injection is limited by the relatively low in-cylinder gas pressure because of spray impingement on the cylinder walls. Thus, it is also of interest to consider low-pressure injectors as an alternative. In the present paper, the parametric behaviour of the combustion characteristics in an HCCI engine operated with a low-pressure fuel injector were investigated through numerical simulations and engine experiments. Parameters including the start-of-injection (SOI) timing and exhaust gas recirculation were considered, and diesel and n-heptane fuels were used. The results show good agreement of behaviour trends between the experiments and the numerical simulations. With its lower vaporization rates, significant effects of the SOI timing and intake gas temperature were seen for diesel fuel due to the formation of wall films. The modelling results also explained the origin of high-temperature NO x-producing regions due to the effect of the gas density on the spray.

scholarly journals Combustion characteristics of compression ignition engine fuelled with rapeseed oil–diesel fuel–n-butanol blends

2021 ◽  
Vol 76 ◽  
pp. 17
Author(s):  
Jakub Čedík ◽  
Martin Pexa ◽  
Bohuslav Peterka ◽  
Miroslav Müller ◽  
Michal Holubek ◽  
...  
Keyword(s):  
Vegetable Oils ◽  
Diesel Fuel ◽  
Rapeseed Oil ◽  
Direct Injection ◽  
Combustion Characteristics ◽  
Solid Particles ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Fuel Blends

Liquid biofuels for compression ignition engines are often based on vegetable oils. In order to be used in compression ignition engine the vegetable oils have to be processed because of their high viscosity or it is also possible to use vegetable oils in fuel blends. In order to decrease the viscosity of the fuel blends containing crude vegetable oil the alcohol-based fuel admixtures can be used. The paper describes the effect of rapeseed oil–diesel fuel–n-butanol blends on combustion characteristics and solid particles production of turbocharged compression ignition engine. The 10% and 20% concentrations of n-butanol in the fuel blend were measured and analysed. The engine Zetor 1204, located in tractor Zetor Forterra 8641 with the power of 60kW and direct injection was used for the measurement. The engine was loaded through power take off shaft of the tractor using mobile dynamometer MAHA ZW500. The measurement was carried out in stabilized conditions at 20%, 60% and 100% engine load. The engine speed was kept at 1950 rpm. Tested fuel blends showed lower production of solid particles than diesel fuel and lower peak cylinder pressure and with increasing concentration of n-butanol in the fuel blend the ignition delay was prolonged and premixed phase of combustion was increased.

Effects of injection strategy on performance and emissions metrics in a diesel/methane dual-fuel single-cylinder compression ignition engine

2019 ◽  
Vol 20 (10) ◽  
pp. 1059-1072 ◽  
Author(s):  
Metin Korkmaz ◽  
Dennis Ritter ◽  
Bernhard Jochim ◽  
Joachim Beeckmann ◽  
Dirk Abel ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Deep Understanding ◽  
Injection Pressure ◽  
Dual Fuel ◽  
Injection Timing ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Single Cylinder ◽  
Cylinder Compression ◽  
The Impact

In order to counteract the drawbacks of conventional diesel combustion, which can lead to high indicated specific nitric oxide and indicated specific particulate matter emissions, a promising diesel-dual-fuel concept is investigated and evaluated. In this study, methane is used as supplement to liquid diesel fuel due to its benefits like high knock resistance and clean combustion. A deep understanding of the in-cylinder process is required for engine design and combustion controller development. To investigate the impact of different input parameters such as injection duration, injection timing, and substitution rate on varying output parameters like load, combustion phasing, and engine-out emissions, numerous investigations were conducted. Engine speed, global equivalence ratio, and injection pressure were held constant. The experiments were carried out in a modified single-cylinder compression ignition engine. The results reveal regimes with different dependencies between injection timing of diesel fuel and combustion phasing. This work demonstrates the potential of the diesel-dual-fuel concept by combining sophisticated combustion control with the favorable combustion mode. Without employing exhaust gas recirculation, TIER IMO 3 emissions limits are met while ensuring high thermal efficiency.

Performance and combustion characteristics of a compression ignition engine running on diesel-biodiesel-ethanol (DBE) blends – Potential as diesel fuel substitute on an Euro III engine

2019 ◽  
Vol 136 ◽  
pp. 586-598 ◽  
Author(s):  
Florian Pradelle ◽  
Sergio Leal Braga ◽  
Ana Rosa Fonseca de Aguiar Martins ◽  
Franck Turkovics ◽  
Renata Nohra Chaar Pradelle
Keyword(s):  
Diesel Fuel ◽  
Combustion Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine

Investigating the Use of Heavy Alcohols as a Fuel Blending Agent for Compression Ignition Engine Applications

2012 ◽  
Author(s):  
Anita I. Ramírez ◽  
Sibendu Som ◽  
Lisa A. LaRocco ◽  
Timothy P. Rutter ◽  
Douglas E. Longman
Keyword(s):  
Diesel Fuel ◽  
High Speed ◽  
Cetane Number ◽  
Argonne National Laboratory ◽  
Operating Conditions ◽  
Injection Timing ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Performance And Emission

There has been an extensive worldwide search for alternate fuels that fit with the existing infrastructure and would thus displace fossil-based resources. In metabolic engineering work at Argonne National Laboratory, strains of fuel have been designed that can be produced in large quantities by photosynthetic bacteria, eventually producing a heavy alcohol called phytol (C20H40O). Phytol’s physical and chemical properties (cetane number, heat of combustion, heat of vaporization, density, surface tension, vapor pressure, etc.) correspond in magnitude to those of diesel fuel, suggesting that phytol might be a good blending agent in compression ignition (CI) engine applications. The main reason for this study was to investigate the feasibility of using phytol as a blending agent with diesel; this was done by comparing the performance and emission characteristics of different blends of phytol (5%, 10%, 20% by volume) with diesel. The experimental research was performed on a single-cylinder engine under conventional operating conditions. Since phytol’s viscosity is much higher than that of diesel, higher-injection-pressure cases were investigated to ensure the delivery of fuel into the combustion chamber was sufficient. The influence of the fuel’s chemical composition on performance and emission characteristics was captured by doing an injection timing sweep. Combustion characteristics as shown in the cylinder pressure trace were comparable for the diesel and all the blends of phytol at each of the injection timings. The 5% and 10% blends show lower CO and similar NOx values. However, the 20% blend shows higher NOx and CO emissions, indicating that the chemical and physical properties have been altered substantially at this higher percentage. The combustion event was depicted by performing high-speed natural luminosity imaging using endoscopy. This revealed that the higher in-cylinder temperatures for the 20% blend are the cause for its higher NOx emissions. In addition, three-dimensional simulations of transient, turbulent nozzle flow were performed to compare the injection and cavitation characteristics of phytol and its blends. Specifically, area and discharge coefficients and mass flow rates of diesel and phytol blends were compared under corresponding engine operating conditions. The conclusion is that phytol may be a suitable blending agent with diesel fuel for CI applications.

Experimental Investigation on Emission Characteristics of Diesel N-Pentanol Blend in Homogeneous Charged Compression Ignition Engine

2021 ◽  
Vol 13 (3) ◽  
Author(s):  
S. Mathavan ◽  
T. Mothilal ◽  
V. Andal ◽  
V. Velukumar
Keyword(s):  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Fuel Injection ◽  
Injection Pressure ◽  
Injection Timing ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Fuel Injection Pressure

The invention of internal combustion engines is undoubtedly one of the greatest inventions of the modern era. There has been steady scientific research to look for alternative fuel which is economical, renewable and less harmful to nature and man compared to fossil fuels. The present project is one such experimental work to investigate the performance of a blend of diesel / N-pentanol in an appropriate combustion technique and to establish its suitability as a renewable fuel. The relative performance of diesel fuel and the blend of diesel / n-pentanol will also be analyzed. Diesel fuel blended with 30 percentage n-pentanol is the fuel blend that is proposed to be used in the experiment. Researchers have established that the application of Homogeneously Charged Compression Ignition (HCCI) technique could result in in-cylinder reduction of NOx and PM. Higher thermal efficiency could also be attained. The project also covers studying the emission effect of the diesel/n-pentanol fuel blend for various fuel injection timing, various fuel injection pressure, different EGR rates and different inlet air temperature.

Sign in / Sign up

Export Citation Format

Share Document