scholarly journals A general solution for accelerating screw dislocations in arbitrary slip systems with reflection symmetry

2021 ◽  
Vol 152 ◽  
pp. 104448
Author(s):  
Daniel N. Blaschke
Keyword(s):  
General Solution ◽  
Slip Systems ◽  
Reflection Symmetry ◽  
Screw Dislocations

Characterization of the High Temperature Dislocation Substructure of Mosi2

1994 ◽  
Vol 364 ◽  
Author(s):  
J. P. Campbell ◽  
H. Chang ◽  
R. Gibala
Keyword(s):  
High Temperature ◽  
Deformation Behavior ◽  
Dislocation Substructure ◽  
Dislocation Climb ◽  
Slip Systems ◽  
Quantitative Characterization ◽  
Temperature Variations ◽  
Screw Dislocations ◽  
Orientation Distributions

AbstractThe dislocation substructure of polycrystalline MoSi2 deformed in compression at temperatures ranging from 900°C to 1300°C has been investigated. Slip is found to occur primarily by <100> Burgers vectors. A quantitative characterization of the <100> dislocation substructure is developed for several deformation temperatures, including the slip systems present and the relative occurrence of each. Orientation distributions showing the screw/edge character of the <100> dislocations are generated at each deformation temperature. Variations in these distributions with temperature are noted, and the implications of these variations to the deformation behavior of MoSi2 are discussed. Notable observations include the onset of dislocation climb between 900°C and 1100°C, a strong preference for dislocations of mixed character at 900°C, and the complete absence of pure screw dislocations from 900°C to 1300°C.

Influence of Dislocation Mobility on Room and High Temperature Ductility of -Oriented Nial Single Crystals

1994 ◽  
Vol 364 ◽  
Author(s):  
M. A. Morris ◽  
J. P. Perez ◽  
R. Darolia
Keyword(s):  
High Temperature ◽  
Single Crystals ◽  
Room Temperature ◽  
Tensile Tests ◽  
Slip Systems ◽  
Dislocation Mobility ◽  
Screw Dislocations ◽  
Large Density ◽  
Thin Foils

AbstractThe dislocation configurations produced by room and high temperature compression of <100> oriented single crystals of binary NiAl and in those containing iron and hafnium additions have been analysed and compared to those obtained by hardness indentation and TEM insitu tensile tests. Kinking occurs during room temperature compression such that <100> dislocations are activated in all cases but the iron-containing alloy also exhibited a large density of <111> screw dislocations. The latter however, appear immobile when they are created by hardness indentations of thin foils, while only pile-ups of <100> segments can propagate. Similarly, although different slip systems are present after high temperature compression, only <100> dislocation segments have been confirmed to be mobile after room temperature hardness indentation of these predeformed thin foils. The improvement in ductility observed at room temperature in the predeformed specimens of the binary and the iron containing alloys has been attributed to the increased production of these mobile <100> dislocations.

The Role of VLBI in the Establishment of Coordinate Systems

1975 ◽  
Vol 26 ◽  
pp. 293-295 ◽  
Author(s):  
I. Zhongolovitch
Keyword(s):  
General Solution ◽  
Future Development ◽  
Rational Approach ◽  
Radio Telescopes ◽  
Coordinate Systems ◽  
Tectonic Plates ◽  
Astronomical Observations ◽  
Optical Instruments ◽  
Fundamental Polyhedron

Considering the future development and general solution of the problem under consideration and also the high precision attainable by astronomical observations, the following procedure may be the most rational approach:1. On the main tectonic plates of the Earth’s crust, powerful movable radio telescopes should be mounted at the same points where standard optical instruments are installed. There should be two stations separated by a distance of about 6 to 8000 kilometers on each plate. Thus, we obtain a fundamental polyhedron embracing the whole Earth with about 10 to 12 apexes, and with its sides represented by VLBI.

Electron Microscopy of Shock Loaded Polycrystalline Beryllium

1974 ◽  
Vol 32 ◽  
pp. 506-507 ◽  
Author(s):  
J. M. Galbraith ◽  
L. E. Murr ◽  
A. L. Stevens
Keyword(s):  
Electron Microscopy ◽  
Wave Propagation ◽  
Structural Change ◽  
Single Crystal ◽  
Diffraction Pattern ◽  
Shock Loading ◽  
Slip Systems ◽  
Compression Tests ◽  
X Ray Diffraction ◽  
X Ray

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.

Dislocation Substructures Produced During Tensile, Creep, and Fatigue Deformation of Ti3Al at 700°C

1977 ◽  
Vol 35 ◽  
pp. 272-273
Author(s):  
S. M. L. Sastry
Keyword(s):  
Intermetallic Compound ◽  
Strain Rate ◽  
Tensile Creep ◽  
Slip Systems ◽  
Slip Vector ◽  
Superlattice Structure ◽  
Slip Activity ◽  
Dislocation Arrangement ◽  
Ordered Intermetallic ◽  
Tangled Dislocation

Ti3Al is an ordered intermetallic compound having the DO19-type superlattice structure. The compound exhibits very limited ductility in tension below 700°C because of a pronounced planarity of slip and the absence of a sufficient number of independent slip systems. Significant differences in slip behavior in the compound as a result of differences in strain rate and mode of deformation are reported here.Figure 1 is a comparison of dislocation substructures in polycrystalline Ti3Al specimens deformed in tension, creep, and fatigue. Slip activity on both the basal and prism planes is observed for each mode of deformation. The dominant slip vector in unidirectional deformation is the a-type (b) = <1120>) (Fig. la). The dislocations are straight, occur for the most part in a screw orientation, and are arranged in planar bands. In contrast, the dislocation distribution in specimens crept at 700°C (Fig. lb) is characterized by a much reduced planarity of slip, a tangled dislocation arrangement instead of planar bands, and an increased incidence of nonbasal slip vectors.

In situ Tensile Experiments at Low Temperatures on Niobium Single Crystals by H.V.E.M.

1975 ◽  
Vol 33 ◽  
pp. 58-59
Author(s):  
F. H. Louchet ◽  
L. P. Kubin
Keyword(s):  
Electron Microscope ◽  
Transition Temperature ◽  
Low Temperature ◽  
Slip System ◽  
Low Temperatures ◽  
Tensile Axis ◽  
Image Intensifier ◽  
Screw Dislocations ◽  
Source Operation

Experiments have been carried out on the 3 MeV electron microscope in Toulouse. The low temperature straining holder has been previously described Images given by an image intensifier are recorded on magnetic tape.The microtensile niobium samples are cut in a plane with the two operative slip directions [111] and lying in the foil plane. The tensile axis is near [011].Our results concern:- The transition temperature of niobium near 220 K: at this temperature and below an increasing difference appears between the mobilities of the screw and edge portions of dislocations loops. Source operation and interactions between screw dislocations of different slip system have been recorded.

Observation of secondary slip systems in tungsten bicrystals

1984 ◽  
Vol 42 ◽  
pp. 478-479
Author(s):  
J. R. Fekete ◽  
R. Gibala
Keyword(s):  
Stress Field ◽  
Grain Boundaries ◽  
Deformation Behavior ◽  
Stress Axis ◽  
Polycrystalline Materials ◽  
Slip Systems ◽  
Metallic Materials ◽  
Twist Boundary ◽  
Secondary Slip ◽  
Plane Normal

The deformation behavior of metallic materials is modified by the presence of grain boundaries. When polycrystalline materials are deformed, additional stresses over and above those externally imposed on the material are induced. These stresses result from the constraint of the grain boundaries on the deformation of incompatible grains. This incompatibility can be elastic or plastic in nature. One of the mechanisms by which these stresses can be relieved is the activation of secondary slip systems. Secondary slip systems have been shown to relieve elastic and plastic compatibility stresses. The deformation of tungsten bicrystals is interesting, due to the elastic isotropy of the material, which implies that the entire compatibility stress field will exist due to plastic incompatibility. The work described here shows TEM observations of the activation of secondary slip in tungsten bicrystals with a [110] twist boundary oriented with the plane normal parallel to the stress axis.

Sign in / Sign up

Export Citation Format

Share Document