Assessment of morphological characteristics and physico-mechanical properties of geopolymer green foam lightweight aggregate formulated by microwave irradiation

2021 ◽  
Vol 35 ◽  
pp. 102081
Author(s):  
Fahad K. Alqahtani ◽  
Khuram Rashid ◽  
Idrees Zafar ◽  
M. Iqbal Khan
Keyword(s):  
Mechanical Properties ◽  
Microwave Irradiation ◽  
Morphological Characteristics ◽  
Lightweight Aggregate

Mechanical Properties of Mortar Modified with Cement Treated Tyre Crumb and Oil Palm Fruit Fibre

2015 ◽  
Vol 802 ◽  
pp. 225-230
Author(s):  
Farah Noor Abdul Aziz ◽  
Sani Mohammed Bida ◽  
Noor Azline Mohd Nasir ◽  
Nor Azizi Safiee ◽  
Mohd Saleh Jaafar
Keyword(s):  
Mechanical Properties ◽  
Oil Palm ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Material Research ◽  
Split Tensile Strength ◽  
Palm Fruit ◽  
The Matrix ◽  
Waste Tyre ◽  
Mechanical Strengths

Addition or replacement of waste tyre in mortars and concretes in lightweight aggregate concrete composites are popular in concrete material research although the mechanical properties of the composite are reduced. Various research studies have been conducted in an effort to improve the mechanical properties of concretes and mortars containing waste tyre particles using chemicals and additives which lead to increase cost. This approach presents an economical and sustainable method, through adding oil palm fruit fibre (OPFF) at 0.5, 1%, and 1.5% by mass of cement content into the matrix and pre-treating the tyre crumb aggregate (0-40%) by volume with cement, in order to improve the properties of the composite. Mechanical properties including compressive strength, split tensile strength and flexural strength were measured on the mortar specimens. Results showed the addition of 0.5% OPFF in 10% treated tyre crumb mortar gives the best improvement in the mechanical strengths of mortar modified with treated tyre crumb.

Mechanical Properties of Fiber Reinforced Lightweight Aggregate Concrete

2011 ◽  
Vol 477 ◽  
pp. 274-279 ◽  
Author(s):  
Yi Xu ◽  
Lin Hua Jiang ◽  
Hong Qiang Chu ◽  
Lei Chen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Water Hyacinth ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Lightweight Aggregate ◽  
Splitting Tensile Strength ◽  
Lightweight Aggregate Concrete ◽  
Fiber Types

In this study, the effects of fiber types on the mechanical properties of lightweight aggregate concretes were investigated. Three types of fibers, namely, polypropylene fiber, steel fiber and water hyacinth (Eichhornia crassipes) fiber, and two types of lightweight aggregates, namely, expanded polystyrene and ceramsite were used. The compressive strength and splitting tensile strength of concretes were tested. The results show that both the compressive strength and the splitting tensile strength were improved by adding a reasonable volume of steel fiber and polypropylene fiber into LWAC. The addition of water hyacinth fiber had little effect on the compressive strength of LWAC, while a little increase was observed in the splitting tensile strength.

Lightweight Aggregate Concrete as an Alternative for Dense Concrete in Post-Tensioned Concrete Slab

2018 ◽  
Vol 926 ◽  
pp. 140-145 ◽  
Author(s):  
Małgorzata Mieszczak ◽  
Lucyna Domagała
Keyword(s):  
Mechanical Properties ◽  
Lightweight Concrete ◽  
Concrete Slab ◽  
Lightweight Aggregate ◽  
Lightweight Aggregate Concrete ◽  
Aggregate Concrete ◽  
Large Span ◽  
Shrinkage And Creep ◽  
Theoretical Results ◽  
Post Tensioned

The paper presents the results of tests conducted on two lightweight aggregate concretes made of new national Certyd artificial aggregate. This research is intended to first application of lightweight concrete to construct large-span post-tensioned slab. In addition to mechanical properties development, shrinkage and creep during 3 months of loading were tested. The obtained results are compared with theoretical results predicted by standard. Conducted tests indicated, that measured values of shrinkage and creep are significantly lower than predicted ones. This is promise for application of tested concrete in construction of post-tensioned slabs.

Morphological Characteristics and Physical & Mechanical Properties of seeds of small-seeded crops

2020 ◽  
pp. 27-35
Author(s):  
Elchyn Aliiev ◽  
◽  
Christina Lupko ◽  
Keyword(s):  
Mechanical Properties ◽  
Coefficient Of Friction ◽  
Morphological Characteristics ◽  
Physical And Mechanical Properties ◽  
Specific Weight ◽  
Test Material ◽  
Effective Diameter ◽  
Morphological Parameters ◽  
Separation Processes ◽  
The Coefficient Of Friction

To create a database and systematize the seeds of samples of small-seeded crops, it is necessary to determine the patterns of influence of morphological parameters on their physical and mechanical properties. The development of the latest technologies and technical devices for cleaning and separation is possible due to the understanding of the characteristic morphological parameters for each of the small-seeded crops. The aim of the research is to determine the physical and mechanical properties of the seed material of small-seeded crops (mustard, flax, ryegrass, rapeseed), necessary to increase the efficiency of their cleaning and separation processes. To achieve this goal, a plan of experimental research was developed, which provided for the determination of physical and mechanical parameters of seeds of small-seeded crops, namely: indicators that characterize the flowability of seeds (angle of natural bias); frictional properties of seeds (static coefficient of friction); porosity (density) and density; size and mass characteristics of seeds (length, width, thickness, effective diameter, weight of 1000 seeds). It is established that the physical and mechanical properties of seeds of small-seeded crops are greatly influenced by its humidity. With increasing humidity, the performance of the test material increases. This is due to the fact that with increasing humidity, the shape of the seed almost turns into a spherical, which, in turn, leads to an increase in the curvature of the surface and reduce the points of contact between the seeds. As a result, the angle of natural inclination increases. The coefficient of friction of seeds of small-seeded crops depends on the roughness of the friction surface and decreases with increasing humidity. This is due to the fact that with increasing humidity decreases the forces of molecular attraction of the seed coat to the surface of the material. Seed density increases with increasing humidity. From this we can conclude that the absorption of moisture by the investigated material increases the total weight of the seed, and as a result - increases its specific weight.

Effect of extrusion temperature on fused filament fabrication parts orthotropic behaviour

2019 ◽  
Vol 26 (4) ◽  
pp. 639-647
Author(s):  
Michele Angelo Attolico ◽  
Caterina Casavola ◽  
Alberto Cazzato ◽  
Vincenzo Moramarco ◽  
Gilda Renna
Keyword(s):  
Mechanical Properties ◽  
Morphological Characteristics ◽  
Single Layer ◽  
Acrylonitrile Butadiene Styrene ◽  
Surface Characteristics ◽  
Tensile Tests ◽  
Extrusion Temperature ◽  
Fused Filament Fabrication ◽  
Bonding Quality ◽  
Content Type

Purpose The purpose of this paper is to verify the effects of extrusion temperature on orthotropic behaviour of the mechanical properties of parts obtained by fused filament fabrication (FFF) under quasi-static tensile loads. Design/methodology/approach Tensile tests were performed on single layer specimens fabricated in polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) to evaluate the mechanical properties at different extrusion temperatures and raster orientations (0°, 45° and 90°). Furthermore, a detailed study of morphological characteristics of the single layer samples cross-section and of the bonding quality among adjacent deposited filaments was performed by scanning electron microscopy to correlate the morphology of materials with mechanical behaviour. Findings The results show that the orthotropic behaviour of FFF-printed parts tends to reduce, while the mechanical properties improved with increase in extrusion temperature. Furthermore, the increase in extrusion temperature led to an improvement in inter-raster bonding quality and in the compactness and homogeneity of the parts. Originality/value The relation between the extrusion temperature, orthotropic behaviour and morphological surface characteristics of the single layer specimen obtained by FFF has not been previously reported.

Influence of the micro-structural factors upon thermal and mechanical properties of various bag leathers

2017 ◽  
Vol 52 (3) ◽  
pp. 167-176 ◽  
Author(s):  
AK Mondal ◽  
PK Chattopadhyay
Keyword(s):  
Mechanical Properties ◽  
Morphological Characteristics ◽  
Crosslinking Density ◽  
Structural Factors ◽  
Melamine Formaldehyde ◽  
Elongation At Break ◽  
Indian Origin ◽  
Higher Temperature ◽  
Temperature And Pressure ◽  
Vegetable Tannins

Four different bag leathers, such as, Sheep Bag Leather (SBL), Buffalo Vegetable Tanned Leather (BVTL), Cow Drum Dyed Dry Milled Leather (CDDDML), and Cow Crocodile Print Leather (CCPL), were processed by different methods from respective wet-blues of Indian origin. Thermal degradation pro?le and mechanical properties of the samples were evaluated, and crosslink densities of each sample were measured by ?tment of Mooney-Rivlin equation on stress-strain plots. Morphological characteristics (e.g. ?bre structure, ?bre thickness, splitting etc.) of all the specimens were investigated by image analyses of SEM photomicrographs. The highest crosslinking density for BVTL was attributed to its higher ?bre and ?bril thicknesses coupled with rigorous retanning by vegetable tannins and syntans. Embossing at higher temperature and pressure reduced CCPL’s elongation-at-break value and hence stretchiness possibly due to the development of set properties within the CCPL matrix. SBL was noted to contain huge void spaces that increased its stretchiness, and melamine formaldehyde syntans showed pronounced in?uence in increasing the thermal resistance of both CCPL and CDDDML.Bangladesh J. Sci. Ind. Res. 52(3), 167-176, 2017

Sign in / Sign up

Export Citation Format

Share Document