A short review on approach for biodiesel production: Feedstock’s, properties, process parameters and environmental sustainability

Author(s):  
Niraj S. Topare ◽  
Rohit I. Jogdand ◽  
Hruturaj P. Shinde ◽  
Rahul S. More ◽  
Anish Khan ◽  
...  
2007 ◽  
Vol 21 (5) ◽  
pp. 3023-3027 ◽  
Author(s):  
K. G. Georgogianni ◽  
M. G. Kontominas ◽  
E. Tegou ◽  
D. Avlonitis ◽  
V. Gergis

RSC Advances ◽  
2014 ◽  
Vol 4 (100) ◽  
pp. 57250-57266 ◽  
Author(s):  
Santanu Sarkar ◽  
Ranjana Das ◽  
Heechul Choi ◽  
Chiranjib Bhattacharjee

In recent years, the occurrence of persistent organic compounds in industrial as well as municipal effluents is becoming a serious threat to the environment. The detrimental effects can be minimized with the help of photocatalysis.


PeerJ ◽  
2016 ◽  
Vol 4 ◽  
pp. e1780 ◽  
Author(s):  
Kevin Stemmler ◽  
Rebecca Massimi ◽  
Andrea E. Kirkwood

Much research has focused on growing microalgae for biofuel feedstock, yet there remain concerns about the feasibility of freshwater feedstock systems. To reduce cost and improve environmental sustainability, an ideal microalgal feedstock system would be fed by municipal, agricultural or industrial wastewater as a main source of water and nutrients. Nonetheless, the microalgae must also be tolerant of fluctuating wastewater quality, while still producing adequate biomass and lipid yields. To address this problem, our study focused on isolating and characterizing microalgal strains from three municipal wastewater treatment systems (two activated sludge and one aerated-stabilization basin systems) for their potential use in biofuel feedstock production. Most of the 19 isolates from wastewater grew faster than two culture collection strains under mixotrophic conditions, particularly with glucose. The fastest growing wastewater strains included the generaChlorellaandDictyochloris. The fastest growing microalgal strains were not necessarily the best lipid producers. Under photoautotrophic and mixotrophic growth conditions, single strains ofChlorellaandScenedesmuseach produced the highest lipid yields, including those most relevant to biodiesel production. A comparison of axenic and non-axenic versions of wastewater strains showed a notable effect of commensal bacteria on fatty acid composition. Strains grown with bacteria tended to produce relatively equal proportions of saturated and unsaturated fatty acids, which is an ideal lipid blend for biodiesel production. These results not only show the potential for using microalgae isolated from wastewater for growth in wastewater-fed feedstock systems, but also the important role that commensal bacteria may have in impacting the fatty acid profiles of microalgal feedstock.


2015 ◽  
Vol 4 (2) ◽  
Author(s):  
Alvaro Mendoza ◽  
Gemma Vicente ◽  
L. F. Bautista ◽  
Victoria Morales

AbstractBiomass from oleaginous microorganisms is an attractive source of materials used for the production of renewable fuels and industrial products due to its high productivity and the fact that it does not compete with human food. To ensure the economic feasibility and environmental sustainability of microbial biomass as feedstock, it is necessary to integrate its production and processing into the biorefinery concept. To achieve this goal, biodiesel production and fractionation of the whole biomass into different types of compounds (lipids, proteins, etc.) and further processing of each fraction must be performed. In the present work, the use of a microbial biomass source, the microalga


2020 ◽  
Vol 44 (2) ◽  
pp. 325-332
Author(s):  
P. Kumar ◽  
N. Mohandas Gandhi

Shell moulding is a process for producing simple or complex near-net-shape castings and maintaining tight tolerances with a high degree of dimensional stability. The main objective of the present research is to achieve environmental sustainability by thermal reclamation of the used shell mould foundry sand and present the results of achieving environmental sustainability. The investigations indicate that the thermal reclamation of the used foundry sand helps in achieving sustainability, and the selection of optimal process parameters like percentage of resin, catalyst, and fresh silica sand addition are very important in the shell mould foundry.


2020 ◽  
Vol 834 ◽  
pp. 16-23
Author(s):  
Pongchanun Luangpaiboon ◽  
Pasura Aungkulanon

Biodiesel was synthesized from direct transesterification of palm oil reacted with methanol in the presence of a suitable catalyst. There is a sequence of three consecutive reversible reactions for the transesterification process. These process parameters were optimized via the hybrid optimization approach of a conventional response surface method and artificial intelligence mechanisms from Sine Cosine and Thermal Exchange Optimization metaheuristics. The influential parameters and their combined interaction effects on the transesterification efficiency were established through a factorial designed experiments. In this study, the influential parameters being optimized to obtain the maximum yield of biodiesel were reaction temperature of 60–150°C, reaction time of 1–6 hours, methanol to oil molar ratio of 6:1–12:1 mol/mol and weight of catalyst of 1–10wt. %. On the first phase, the analysis of variance (ANOVA) revealed the reaction time as the most influential parameter on biodiesel production. Based on the experimental results from the hybrid algorithm via the SCO, it was concluded that the optimal biodiesel yield for the transesterification of palm oil were found to be 100°C for reaction temperature, 4 hours for reaction time, 10:1 wt/wt of ratio methanol to oil and 8% of weight of catalyst with 92.15% and 90.97% of biodiesel yield for expected and experimental values, respectively.


2020 ◽  
Vol 123 ◽  
pp. 109762 ◽  
Author(s):  
Eko K. Sitepu ◽  
Kirsten Heimann ◽  
Colin L. Raston ◽  
Wei Zhang

Sign in / Sign up

Export Citation Format

Share Document