Real-Time Moisture Ratio Study of Drying Date Fruit Chips Based on On-Line Image Attributes Using kNN and Random Forest Regression Methods

Measurement ◽  
2020 ◽  
pp. 108899
Author(s):  
Madi Keramat-Jahromi ◽  
Seyed Saeid Mohtasebi ◽  
Hossein Mousazadeh ◽  
Mahdi Ghasemi-Varnamkhasri ◽  
Maryam Rahimi-Movassagh
Keyword(s):  
Random Forest ◽  
Real Time ◽  
Moisture Ratio ◽  
Random Forest Regression ◽  
Regression Methods ◽  
Line Image ◽  
Date Fruit ◽  
On Line

Adaptive Signal Analysis and Interpretation for Real-time Intelligent Patient Monitoring

1994 ◽  
Vol 33 (01) ◽  
pp. 60-63 ◽  
Author(s):  
E. J. Manders ◽  
D. P. Lindstrom ◽  
B. M. Dawant
Keyword(s):  
Computer Architecture ◽  
Real Time ◽  
Data Abstraction ◽  
Monitoring Strategy ◽  
Intelligent Monitoring ◽  
Patient Status ◽  
On Line ◽  
Main Components ◽  
And Control ◽  
Adaptive Signal

Abstract:On-line intelligent monitoring, diagnosis, and control of dynamic systems such as patients in intensive care units necessitates the context-dependent acquisition, processing, analysis, and interpretation of large amounts of possibly noisy and incomplete data. The dynamic nature of the process also requires a continuous evaluation and adaptation of the monitoring strategy to respond to changes both in the monitored patient and in the monitoring equipment. Moreover, real-time constraints may imply data losses, the importance of which has to be minimized. This paper presents a computer architecture designed to accomplish these tasks. Its main components are a model and a data abstraction module. The model provides the system with a monitoring context related to the patient status. The data abstraction module relies on that information to adapt the monitoring strategy and provide the model with the necessary information. This paper focuses on the data abstraction module and its interaction with the model.

Nitrogen Removal in a Real-Time Controlled Sequencing Batch Membrane Bioreactor

2010 ◽  
Vol 5 (3) ◽  
Author(s):  
Cheng-Nan Chang ◽  
Li-Ling Lee ◽  
Han-Hsien Huang ◽  
Ying-Chih Chiu
Keyword(s):  
Real Time ◽  
Nitrogen Removal ◽  
Membrane Bioreactor ◽  
Synthetic Wastewater ◽  
Real Time Control ◽  
Time Control ◽  
Cake Layer ◽  
On Line ◽  
Solid Liquid ◽  
Solid Liquid Separation

The performance of a real-time controlled Sequencing Batch Membrane Bioreactor (SBMBR) for removing organic matter and nitrogen from synthetic wastewater has been investigated in this study under two specific ammonia loadings of 0.0086 and 0.0045g NH4+-N gVSS−1 day−1. Laboratory results indicate that both COD and DOC removal are greater than 97.5% (w/w) but the major benefit of using membrane for solid-liquid separation is that the effluent can be decanted through the membrane while aeration is continued during the draw stage. With a continued aeration, the sludge cake layer is prevented from forming thus alleviating the membrane clogging problem in addition to significant nitrification activities observed in the draw stage. With adequate aeration in the oxic stage, the nitrogen removal efficiency exceeding 99% can be achieved with the SBMBR system. Furthermore, the SBMBR system has also been used to study the occurrence of ammonia valley and nitrate knee that can be used for real-time control of the biological process. Under appropriate ammonia loading rates, applicable ammonia valley and nitrate knee are detected. The real-time control of the SBMBR can be performed based on on-line ORP and pH measurements.

Modifications of rainfall runoff and decision finding models for on-line simulation in real time control

1999 ◽  
Vol 39 (9) ◽  
pp. 201-207
Author(s):  
Andreas Cassar ◽  
Hans-Reinhard Verworn
Keyword(s):  
Real Time ◽  
Urban Drainage ◽  
Rain Event ◽  
Rainfall Runoff ◽  
Real Time Control ◽  
Design Storm ◽  
Time Control ◽  
Timing Data ◽  
On Line ◽  
Rainfall Runoff Model

Most of the existing rainfall runoff models for urban drainage systems have been designed for off-line calculations. With a design storm or a historical rain event and the model system the rainfall runoff processes are simulated, the faster the better. Since very recently, hydrodynamic models have been considered to be much too slow for real time applications. However, with the computing power of today - and even more so of tomorrow - very complex and detailed models may be run on-line and in real time. While the algorithms basically remain the same as for off-line simulations, problems concerning timing, data management and inter process communication have to be identified and solved. This paper describes the upgrading of the existing hydrodynamic rainfall runoff model HYSTEM/EXTRAN and the decision finding model INTL for real time performance, their implementation on a network of UNIX stations and the experiences from running them within an urban drainage real time control project. The main focus is not on what the models do but how they are put into action and made to run smoothly embedded in all the processes necessary in operational real time control.

Sign in / Sign up

Export Citation Format

Share Document