Scalable fabrication of in-plane microscale self-powered integrated systems for fast-response and highly selective dual-channel gas detection

Nano Energy ◽  
2021 ◽  
pp. 106253
Author(s):  
Xiaoyu Shi ◽  
Junyu Chang ◽  
Jieqiong Qin ◽  
Hanqing Liu ◽  
Xiong Zhang ◽  
...  
Keyword(s):  
Fast Response ◽  
Gas Detection ◽  
Integrated Systems ◽  
Dual Channel ◽  
Self Powered

scholarly journals Self-Powered All-Inorganic Perovskite Photodetectors with Fast Response Speed

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Ting Zhang ◽  
Shibin Li
Keyword(s):  
High Performance ◽  
Solution Process ◽  
Response Speed ◽  
Fast Response ◽  
Single Step ◽  
Inorganic Perovskite ◽  
Perovskite Materials ◽  
Photoactive Materials ◽  
Self Powered ◽  
Solvent Processing

AbstractIn this manuscript, the inorganic perovskite CsPbI2Br and CsPbIBr2 are investigated as photoactive materials that offer higher stability than the organometal trihalide perovskite materials. The fabrication methods allow anti-solvent processing the CsPbIxBr3−x films, overcoming the poor film quality that always occur in a single-step solution process. The introduced diethyl ether in spin-coating process is demonstrated to be successful, and the effects of the anti-solvent on film quality are studied. The devices fabricated using the methods achieve high-performance, self-powered and the stabilized photodetectors show fast response speed. The results illustrate a great potential of all-inorganic CsPbIxBr3−x perovskites in visible photodetection and provide an effective way to achieve high performance devices with self-powered capability.

High performance self-powered CuZnS/GaN UV photodetectors with ultrahigh on/off ratio (3 × 108)

2021 ◽  
Vol 9 (14) ◽  
pp. 4799-4807
Author(s):  
Yong Zhang ◽  
Weidong Song
Keyword(s):  
Chemical Bath Deposition ◽  
High Performance ◽  
Response Speed ◽  
Fast Response ◽  
Uv Photodetector ◽  
Uv Photodetectors ◽  
Simple Chemical ◽  
Self Powered

P-CuZnS/n-GaN UV photodetector is prepared by a simple chemical bath deposition, showing excellent self-powered properties, including ultrahigh on/off ratio (3 × 108), fast response speed (0.14/40 ms) and large detectivity of 3 × 1013 Jones.

scholarly journals High-Sensitive Numerical Gas Detection Using LSPR Effect and Fano Resonance in a Slotted MDM Structure

2021 ◽  
Author(s):  
Hai Liu ◽  
Benlei Zhao ◽  
Xu Zhang ◽  
Hancheng Zhang ◽  
Bo Wu ◽  
...  
Keyword(s):  
Fano Resonance ◽  
Gas Sensing ◽  
Field Enhancement ◽  
Fast Response ◽  
Gas Detection ◽  
Localized Surface Plasmon ◽  
Gas Sensitivity ◽  
Combined Use ◽  
Coherent Coupling ◽  
Lspr Effect

AbstractA high-sensitive numerical measurement of methane based on the combined use of the localized surface plasmon resonance (LSPR) and Fano resonance in a slotted metal-dielectric-metal (MDM) periodic structure is numerically investigated. A groove is etched in an original MDM structure to excite the diploe mode at both sides of the groove, and the coherent coupling of two dipole modes is enhanced to realize a fast response, which is beneficial to gas-sensing. The influence of geometric parameters on the reflection spectra and methane sensitivity are analyzed to obtain optimal geometry. Moreover, an etching ring is introduced on the top metal to further raise the coupling area and coupling strength. The Fano resonance is subtly integrated into the optimized structure with asymmetry to achieve greater gas sensitivity. After the introduction of the Fano resonance, the field enhancement caused by the LSPR effect becomes greater and the methane sensitivity can reach up to 8.421 nm/% in numerical calculations, which increases 56.8% more than that of the original one. The combined use of the LSPR and Fano resonance in an optimized MDM structure provides an effective method for high-sensitive gas detection.

scholarly journals A fast response, self-powered and room temperature near infrared-terahertz photodetector based on a MAPbI3/PEDOT:PSS composite

2020 ◽  
Vol 8 (35) ◽  
pp. 12148-12154 ◽  
Author(s):  
Yifan Li ◽  
Yating Zhang ◽  
Tengteng Li ◽  
Xin Tang ◽  
Mengyao Li ◽  
...  
Keyword(s):  
Response Time ◽  
Room Temperature ◽  
Near Infrared ◽  
Fast Response ◽  
Rapid Response ◽  
Self Powered

A novel self-powered NIR and THz PTE PD based on a (MAPbI3/PEDOT:PSS) composite with a rapid response time of 28 μs.

scholarly journals A Self-Powered Nanogenerator for the Electrical Protection of Integrated Circuits from Trace Amounts of Liquid

2019 ◽  
Vol 12 (1) ◽  
Author(s):  
Zhuang Hui ◽  
Ming Xiao ◽  
Daozhi Shen ◽  
Jiayun Feng ◽  
Peng Peng ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
High Performance ◽  
Printed Circuit Board ◽  
Short Circuit ◽  
High Sensitivity ◽  
Short Circuit Current ◽  
Fast Response ◽  
Open Circuit ◽  
Circuit Board ◽  
Self Powered

Abstract With the increase in the use of electronic devices in many different environments, a need has arisen for an easily implemented method for the rapid, sensitive detection of liquids in the vicinity of electronic components. In this work, a high-performance power generator that combines carbon nanoparticles and TiO2 nanowires has been fabricated by sequential electrophoretic deposition (EPD). The open-circuit voltage and short-circuit current of a single generator are found to exceed 0.7 V and 100 μA when 6 μL of water was applied. The generator is also found to have a stable and reproducible response to other liquids. An output voltage of 0.3 V was obtained after 244, 876, 931, and 184 μs, on exposure of the generator to 6 μL of water, ethanol, acetone, and methanol, respectively. The fast response time and high sensitivity to liquids show that the device has great potential for the detection of small quantities of liquid. In addition, the simple easily implemented sequential EPD method ensures the high mechanical strength of the device. This compact, reliable device provides a new method for the sensitive, rapid detection of extraneous liquids before they can impact the performance of electronic circuits, particularly those on printed circuit board.

A pillar[5]arene-based and OH− dependent dual-channel supramolecular chemosensor for recyclable CO2 gas detection: High sensitive and selective off-on-off response

2020 ◽  
Vol 174 ◽  
pp. 108073 ◽  
Author(s):  
Wen-Bo Zhu ◽  
Tai-bao Wei ◽  
Yan-Qing Fan ◽  
Wen-Juan Qu ◽  
Wei Zhu ◽  
...  
Keyword(s):  
Gas Detection ◽  
Co2 Gas ◽  
Dual Channel

scholarly journals Hierarchically patterned self-powered sensors for multifunctional tactile sensing

2020 ◽  
Vol 6 (34) ◽  
pp. eabb9083 ◽  
Author(s):  
Yang Wang ◽  
Heting Wu ◽  
Lin Xu ◽  
Hainan Zhang ◽  
Ya Yang ◽  
...  
Keyword(s):  
Low Cost ◽  
Fast Response ◽  
Temperature Sensors ◽  
Physical Contact ◽  
Tactile Sensing ◽  
Material Identification ◽  
Flexible Sensors ◽  
Temperature Stimulus ◽  
Self Powered ◽  
Multifunctional Sensor

Flexible sensors are highly desirable for tactile sensing and wearable devices. Previous researches of smart elements have focused on flexible pressure or temperature sensors. However, realizing material identification remains a challenge. Here, we report a multifunctional sensor composed of hydrophobic films and graphene/polydimethylsiloxane sponges. By engineering and optimizing sponges, the fabricated sensor exhibits a high-pressure sensitivity of >15.22 per kilopascal, a fast response time of <74 millisecond, and a high stability over >3000 cycles. In the case of temperature stimulus, the sensor exhibits a temperature-sensing resolution of 1 kelvin via the thermoelectric effect. The sensor can generate output voltage signals after physical contact with different flat materials based on contact-induced electrification. The corresponding signals can be, in turn, used to infer material properties. This multifunctional sensor is excellent in its low cost and material identification, which provides a design concept for meeting the challenges in functional electronics.

High performance MoO3−x/Si heterojunction photodetectors with nanoporous pyramid Si arrays for visible light communication application

2019 ◽  
Vol 7 (4) ◽  
pp. 917-925 ◽  
Author(s):  
Yujin Liu ◽  
Guobiao Cen ◽  
Gai Wang ◽  
Junwei Huang ◽  
Suhang Zhou ◽  
...  
Keyword(s):  
Visible Light ◽  
Communication System ◽  
High Performance ◽  
Visible Light Communication ◽  
Fast Response ◽  
Optical Signal ◽  
Self Powered

Self-powered, fast-response heterojunction photodetectors based on nanoporous pyramid Si arrays are successfully developed. The photodetector is further integrated into a visible light communication system as an optical signal receiver.

scholarly journals Nanostructured ZnO/Ag Film Prepared by Magnetron Sputtering Method for Fast Response of Ammonia Gas Detection

Molecules ◽  
2020 ◽  
Vol 25 (8) ◽  
pp. 1899 ◽  
Author(s):  
Yiran Zheng ◽  
Min Li ◽  
Xiaoyan Wen ◽  
Ho-Pui Ho ◽  
Haifei Lu
Keyword(s):  
Magnetron Sputtering ◽  
Thermal Annealing ◽  
Physical Vapor Deposition ◽  
Gas Sensing ◽  
Volume Ratio ◽  
Fast Response ◽  
Gas Detection ◽  
Zno Films ◽  
Zno Film ◽  
Ammonia Gas

Possessing a large surface-to-volume ratio is significant to the sensitive gas detection of semiconductor nanostructures. Here, we propose a fast-response ammonia gas sensor based on porous nanostructured zinc oxide (ZnO) film, which is fabricated through physical vapor deposition and subsequent thermal annealing. In general, an extremely thin silver (Ag) layer (1, 3, 5 nm) and a 100 nm ZnO film are sequentially deposited on the SiO2/Si substrate by a magnetron sputtering method. The porous nanostructure of ZnO film is formed after thermal annealing contributed by the diffusion of Ag among ZnO crystal grains and the expansion of the ZnO film. Different thicknesses of the Ag layer help the formation of different sizes and quantities of hollows uniformly distributed in the ZnO film, which is demonstrated to hold superior gas sensing abilities than the compact ZnO film. The responses of the different porous ZnO films were also investigated in the ammonia concentration range of 10 to 300 ppm. Experimental results demonstrate that the ZnO/Ag(3 nm) sensor possesses a good electrical resistance variation of 85.74% after exposing the sample to 300 ppm ammonia gas for 310 s. Interestingly, a fast response of 61.18% in 60 s for 300 ppm ammonia gas has been achieved from the ZnO/Ag(5 nm) sensor, which costs only 6 s for the response increase to 10%. Therefore, this controllable, porous, nanostructured ZnO film maintaining a sensitive gas response, fabricated by the physical deposition approach, will be of great interest to the gas-sensing community.

Sign in / Sign up

Export Citation Format

Share Document