Solubility, structure transition and chemical durability of Th-doped Nd2Zr2O7 pyrochlore

2021 ◽  
Vol 137 ◽  
pp. 103774
Author(s):  
Lielin Wang ◽  
Jiangbo Li ◽  
Hua Xie ◽  
Qingyun Chen ◽  
Yuqi Xie
Author(s):  
J. Tong ◽  
L. Eyring

There is increasing interest in composites containing zirconia because of their high strength, fracture toughness, and its great influence on the chemical durability in glass. For the zirconia-silica system, monolithic glasses, fibers and coatings have been obtained. There is currently a great interest in designing zirconia-toughened alumina including exploration of the processing methods and the toughening mechanism.The possibility of forming nanocrystal composites by a phase separation method has been investigated in three systems: zirconia-alumina, zirconia-silica and zirconia-titania using HREM. The morphological observations initially suggest that the formation of nanocrystal composites by a phase separation method is possible in the zirconia-alumina and zirconia-silica systems, but impossible in the zirconia-titania system. The separation-produced grain size in silica-zirconia system is around 5 nm and is more uniform than that in the alumina-zirconia system in which the sizes of the small polyhedron grains are around 10 nm. In the titania-zirconia system, there is no obvious separation as was observed in die alumina-zirconia and silica-zirconia system.


Author(s):  
Wai-Kee Li ◽  
Hung Kay Lee ◽  
Dennis Kee Pui Ng ◽  
Yu-San Cheung ◽  
Kendrew Kin Wah Mak ◽  
...  

The First Edition of this book, which appeared in 2013, serves as a problem text for Part I (Fundamentals of Chemical Bonding) and Part II (Symmetry in Chemistry) of the book Advanced Structural Inorganic Chemistry published by Oxford University Press in 2008. A Chinese edition was published by Peking University Press in August in the same year. Since then the authors have received much feedback from users and reviewers, which prompted them to prepare a Second Edition for students ranging from freshmen to senior undergraduates who aspire to attend graduate school after finishing their first degree in Chemistry. Four new chapters are added to this expanded Second Edition, which now contains over 400 problems and their solutions. The topics covered in 13 chapters follow the sequence: electronic states and configurations of atoms and molecules, introductory quantum chemistry, atomic orbitals, hybrid orbitals, molecular symmetry, molecular geometry and bonding, crystal field theory, molecular orbital theory, vibrational spectroscopy, crystal structure, transition metal chemistry, metal clusters: bonding and reactivity, and bioinorganic chemistry. The problems collected in this volume originate from examination papers and take-home assignments that have been part of the teaching program conducted by senior authors at The Chinese University of Hong Kong over nearly a half-century. Whenever appropriate, source references in the chemical literature are given for readers who wish to delve deeper into the subject. Eight Appendices and a Bibliography listing 157 reference books are provided to students and teachers who wish to look up comprehensive presentations of specific topics.


Reactions ◽  
2021 ◽  
Vol 2 (3) ◽  
pp. 227-257
Author(s):  
Arash Yahyazadeh ◽  
Ajay K. Dalai ◽  
Wenping Ma ◽  
Lifeng Zhang

Light olefins as one the most important building blocks in chemical industry can be produced via Fischer–Tropsch synthesis (FTS) from syngas. FT synthesis conducted at high temperature would lead to light paraffins, carbon dioxide, methane, and C5+ longer chain hydrocarbons. The present work focuses on providing a critical review on the light olefin production using Fischer–Tropsch synthesis. The effects of metals, promoters and supports as the most influential parameters on the catalytic performance of catalysts are discussed meticulously. Fe and Co as the main active metals in FT catalysts are investigated in terms of pore size, crystal size, and crystal phase for obtaining desirable light olefin selectivity. Larger pore size of Fe-based catalysts is suggested to increase olefin selectivity via suppressing 1-olefin readsorption and secondary reactions. Iron carbide as the most probable phase of Fe-based catalysts is proposed for light olefin generation via FTS. Smaller crystal size of Co active metal leads to higher olefin selectivity. Hexagonal close-packed (HCP) structure of Co has higher FTS activity than face-centered cubic (FCC) structure. Transition from Co to Co3C is mainly proposed for formation of light olefins over Co-based catalysts. Moreover, various catalysts’ deactivation routes are reviewed. Additionally, techno-economic assessment of FTS plants in terms of different costs including capital expenditure and minimum fuel selling price are presented based on the most recent literature. Finally, the potential for global environmental impacts associated with FTS plants including atmospheric and toxicological impacts is considered via lifecycle assessment (LCA).


2018 ◽  
Vol 782 ◽  
pp. 47-52
Author(s):  
Patrícia Suemi Sato ◽  
Hirotaka Maeda ◽  
Akiko Obata ◽  
Toshihiro Kasuga

60CaO-30P2O5-(10 ̶ x)Nb2O5-xTiO2 (x = 0 ~ 10, mol%) glasses were prepared in order to obtain biomaterials with high chemical durability and therapeutic ions releasability. Dissolution test of these glasses using Tris buffer solution showed the controlled release of niobate ions from Nb2O5-containing glasses and the formation of calcium titanate in some of them. These behavior might induce positive effects for bone regeneration.


2012 ◽  
Vol 19 (06) ◽  
pp. 1250062 ◽  
Author(s):  
X. H. ZHANG ◽  
Y. L. YUE ◽  
H. T. WU

Boroaluminosilicate glasses containing La2O3 were prepared by the normal quenching method. The glass transition temperatures (Tg) were measured by differential scanning calorimetry (DSC). The structural role of RO was investigated by nuclear magnetic resonance (NMR). Chemical durability was evaluated by weight losses of glass samples after immersion in HC1 solution. High resolution scanning electron microscopy (HR-SEM) was used to examine the surface micrographs of corroded glass samples. The dielectric constant and tangent loss were measured in the frequency range 10–106 Hz. The results revealed that chemical durability and dielectric properties increased with increasing La2O3 content.


Author(s):  
Hidekazu Kobayashi ◽  
Ippei Amamoto ◽  
Takuma Yokozawa ◽  
Teruo Yamashita ◽  
Takayuki Nagai ◽  
...  

As the part of investigation for immobilization of the sludge as one of the radioactive wastes arising from the treatment of contaminated water at Fukushima Dai-ichi nuclear power plant, applicability of vitrification method has been evaluated as a candidate technique. The aim of this study is to evaluate the influence of NaCl as one of the main constituents of sludge, on glass formation and glass properties. Two kinds of iron phosphate glass (IPG) media in the xFe2O3-(100-x)P2O5, with x = 30 and 35 (mol%) were chosen and the glass formation, structure and properties including density, coefficient of thermal expansion, glass transition temperature, onset crystallization temperature and chemical durability of NaCl-loaded IPG were studied. The results are summarized as follows. Sodium chloride, NaCl could be loaded into IPG medium as Na2O and Cl contents and their loading ratio could be up to 19 and 15 mol%, respectively. Majority of Cl content of raw material NaCl was thought to be volatilized during glass melting. Loading NaCl into IPG induces to depolymerize glass network of phosphate chains, leads to decrease both glass transition and onset crystallization temperatures, and to increase coefficient of thermal expansion. NaCl-loaded IPG indicated good chemical durability in case of using 35Fe2O3-65P2O5 medium.


2015 ◽  
Vol 51 (46) ◽  
pp. 9535-9538 ◽  
Author(s):  
Lei Li ◽  
Hui Li ◽  
Xiao Cheng Zeng

Simulation of the soft-landing process of pyramidal Au18 onto a rutile TiO2(110) surface using large-scale BOMD simulation.


2007 ◽  
Vol 253 (12) ◽  
pp. 5191-5195
Author(s):  
Makoto Araki ◽  
Jun Taniguchi ◽  
Nobuo Sawada ◽  
Takayuki Utsumi ◽  
Iwao Miyamoto

Sign in / Sign up

Export Citation Format

Share Document