Properties of the model for radiation induced optically stimulated luminescence (OSL) in sodium and potassium chlorides

Growing apprehensions of radiological accidents and terroristic attacks have intensified research efforts to find materials with appropriate radiation sensitivity that are carried close to human body, are ubiquitously available and which can be used as fortuitous dosimeters in rapid determination of doses of individuals after radiation exposure. In this respect, thermoluminescence (TL) and optically stimulated luminescence (OSL) of chip cards and electronic components of personal objects have been recently evaluated by researchers in several countries. OSL and TL signal of chip cards is attributed to SiO2 grains contained in the epoxy layers used for controlling the thixotropic properties whereas the radiation induced signal in electronic components (resistors, resonators, capacitors, ICs, antenna switches, etc.) of personal objects (mobile phones, USB flash drive, MP3 players, etc.) is attributed to the ceramic contents, especially to Al2O3 based substrates.

Download Full-text

Effect of AET on sodium, potassium and esterases of the alimentary tract of irradiated mice

American Journal of Physiology-Legacy Content ◽

10.1152/ajplegacy.1960.199.2.251 ◽

1960 ◽

Vol 199 (2) ◽

pp. 251-255 ◽

Cited By ~ 8

Author(s):

Jean R. Maisin ◽

Raymond A. Popp

Keyword(s):

Small Intestine ◽

Gastrointestinal Tract ◽

Esterase Activity ◽

Complete Recovery ◽

Electrolyte Imbalance ◽

Partial Recovery ◽

Colon Wall ◽

Beneficial Effects ◽

Radiation Induced ◽

Sodium And Potassium

A study was made of the effect of S,2-aminoethylisothiuronium bromide hydrobromide (AET) on the changes in sodium and potassium concentrations in the walls and contents of the gastrointestinal tracts of mice exposed to 1500 r. Mice were given AET and were then irradiated. At intervals thereafter, portions of the gastrointestinal tract and its contents were analyzed for sodium and potassium in a flame spectrophotometer. In mice given AET before exposure to 1500 r, the following radiation-induced abnormalities were completely or partially corrected: decrease in potassium and increase in sodium in the wall of the small intestine; decrease in potassium in the colon wall; and increase in sodium and potassium in the contents of the stomach, small intestine and colon. Extracts from the walls of the small intestines of AET-treated or nontreated, irradiated mice were analyzed chemically for esterase activity. In AET-treated, irradiated mice, complete recovery of esterase activity was observed by day 7 after 900 r, and partial recovery occurred after 1500 r. Since AET reduces radiation damage and thereby allows recovery, the beneficial effects of the compound on the correction of electrolyte imbalance and esterase activity are ascribed to recovery of the tissues of the gastrointestinal tract.

Download Full-text

Radiation-Induced Precipitation at Thin Foil Surfaces in Ni-Be Alloys

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100055217 ◽

1982 ◽

Vol 40 ◽

pp. 598-599

Author(s):

T. Mukai ◽

T. E. Mitchell

Keyword(s):

Electron Microscopy ◽

High Voltage ◽

Electron Irradiation ◽

High Vacuum ◽

Thin Foil ◽

Homogeneous Precipitation ◽

High Voltage Electron Microscopy ◽

Voltage Electron ◽

High Voltage Electron ◽

Radiation Induced

Radiation-induced homogeneous precipitation in Ni-Be alloys was recently observed by high voltage electron microscopy. A coupling of interstitial flux with solute Be atoms is responsible for the precipitation. The present investigation further shows that precipitation is also induced at thin foil surfaces by electron irradiation under a high vacuum.

Download Full-text

Annealing Of Radiation Damage in Tungsten

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100069053 ◽

1970 ◽

Vol 28 ◽

pp. 412-413

Author(s):

Robert C. Rau ◽

John Moteff

Keyword(s):

Electron Microscopy ◽

Transmission Electron Microscopy ◽

Radiation Damage ◽

Thermal Annealing ◽

Neutron Fluence ◽

Dislocation Loops ◽

Defect Clusters ◽

Polycrystalline Tungsten ◽

Transmission Electron ◽

Radiation Induced

Transmission electron microscopy has been used to study the thermal annealing of radiation induced defect clusters in polycrystalline tungsten. Specimens were taken from cylindrical tensile bars which had been irradiated to a fast (E > 1 MeV) neutron fluence of 4.2 × 1019 n/cm2 at 70°C, annealed for one hour at various temperatures in argon, and tensile tested at 240°C in helium. Foils from both the unstressed button heads and the reduced areas near the fracture were examined.Figure 1 shows typical microstructures in button head foils. In the unannealed condition, Fig. 1(a), a dispersion of fine dot clusters was present. Annealing at 435°C, Fig. 1(b), produced an apparent slight decrease in cluster concentration, but annealing at 740°C, Fig. 1(C), resulted in a noticeable densification of the clusters. Finally, annealing at 900°C and 1040°C, Figs. 1(d) and (e), caused a definite decrease in cluster concentration and led to the formation of resolvable dislocation loops.

Download Full-text

Radiation-induced surface decomposition

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100075592 ◽

1983 ◽

Vol 41 ◽

pp. 368-369

Author(s):

M. L. Knotek

Keyword(s):

Ionizing Radiation ◽

Atomic Structure ◽

Chemical Bonding ◽

Neutral Species ◽

Radiation Induced ◽

Physical And Chemical ◽

Surface Decomposition ◽

The Relationship ◽

Electron And Photon ◽

Surface Bond

Modern surface analysis is based largely upon the use of ionizing radiation to probe the electronic and atomic structure of the surfaces physical and chemical makeup. In many of these studies the ionizing radiation used as the primary probe is found to induce changes in the structure and makeup of the surface, especially when electrons are employed. A number of techniques employ the phenomenon of radiation induced desorption as a means of probing the nature of the surface bond. These include Electron- and Photon-Stimulated Desorption (ESD and PSD) which measure desorbed ionic and neutral species as they leave the surface after the surface has been excited by some incident ionizing particle. There has recently been a great deal of activity in determining the relationship between the nature of chemical bonding and its susceptibility to radiation damage.

Download Full-text

In situ TEM studies of irradiation effects for materials improvement

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100086568 ◽

1991 ◽

Vol 49 ◽

pp. 452-453

Author(s):

Charles W. Allen

Keyword(s):

Nuclear Reactor ◽

Austenitic Stainless Steels ◽

High Energy ◽

Point Of View ◽

In Situ Tem ◽

Irradiation Effects ◽

Tem Analysis ◽

Radiation Induced ◽

Analytical Tools

Irradiation effects studies employing TEMs as analytical tools have been conducted for almost as many years as materials people have done TEM, motivated largely by materials needs for nuclear reactor development. Such studies have focussed on the behavior both of nuclear fuels and of materials for other reactor components which are subjected to radiation-induced degradation. Especially in the 1950s and 60s, post-irradiation TEM analysis may have been coupled to in situ (in reactor or in pile) experiments (e.g., irradiation-induced creep experiments of austenitic stainless steels). Although necessary from a technological point of view, such experiments are difficult to instrument (measure strain dynamically, e.g.) and control (temperature, e.g.) and require months or even years to perform in a nuclear reactor or in a spallation neutron source. Consequently, methods were sought for simulation of neutroninduced radiation damage of materials, the simulations employing other forms of radiation; in the case of metals and alloys, high energy electrons and high energy ions.

Download Full-text