Sol-gel coatings doped with graphene nanoplatelets for improving the degradation rate and the cytocompatibility of AZ31 alloy for biomedical applications

Author(s):  
J.P. Fernández-Hernán ◽  
B. Torres ◽  
A.J. López ◽  
E. Martínez-Campos ◽  
J. Rams
Author(s):  
Jesús A. Claudio-Rizo ◽  
Nallely Escobedo-Estrada ◽  
Sara L. Carrillo-Cortes ◽  
Denis A. Cabrera-Munguía ◽  
Tirso E. Flores-Guía ◽  
...  

AbstractDeveloping new approaches to improve the swelling, degradation rate, and mechanical properties of alginate hydrogels without compromising their biocompatibility for biomedical applications represents a potential area of research. In this work, the generation of interpenetrated networks (IPN) comprised from alginate–polyurethane in an aqueous medium is proposed to design hydrogels with tailored properties for biomedical applications. Aqueous polyurethane (PU) dispersions can crosslink and interpenetrate alginate chains, forming amide bonds that allow the structure and water absorption capacity of these novel hydrogels to be regulated. In this sense, this work focuses on studying the relation of the PU concentration on the properties of these hydrogels. The results indicate that the crosslinking of the alginate with PU generates IPN hydrogels with a crystalline structure characterized by a homogeneous smooth surface with high capacity to absorb water, tailoring the degradation rate, thermal decomposition, and storage module, not altering the native biocompatibility of alginate, providing character to inhibit the growth of E. coli and increasing also its hemocompatibility. The IPN hydrogels that include 20 wt.% of PU exhibit a reticulation index of 46 ± 4%, swelling capacity of 545 ± 13% at 7 days of incubation at physiological pH, resistance to both acidic and neutral hydrolytic degradation, mechanical improvement of 91 ± 1%, and no cytotoxicity for monocytes and fibroblasts growing for up to 72 h of incubation. These results indicate that these novel hydrogels can be used for successful biomedical applications in the design of wound healing dressings.


CIRP Annals ◽  
2021 ◽  
Author(s):  
Andrea Ghiotti ◽  
Rachele Bertolini ◽  
Luca Pezzato ◽  
Enrico Savio ◽  
Mara Terzini ◽  
...  

2021 ◽  
pp. 130108
Author(s):  
Subhashree Praharaj ◽  
Senthil Kumar Venkatraman ◽  
R. Vasantharaman ◽  
Sasikumar Swamiappan

2019 ◽  
Vol 126 (8) ◽  
pp. 083107 ◽  
Author(s):  
Prakhar Sengar ◽  
Karelid García-Tapia ◽  
Bonifacio Can-Uc ◽  
Karla Juárez-Moreno ◽  
Oscar E. Contreras-López ◽  
...  

Author(s):  
Amirhossein Bakhtiiari ◽  
Rezvan Khorshidi ◽  
Fatemeh Yazdian ◽  
Hamid Rashedi ◽  
Meisam Omidi

In recent decades, three dimensional (3D) bio-printing technology has found widespread use in tissue engineering applications. The aim of this study is to scrutinize different parameters of the bioprinter – with the help of simulation software – to print a hydrogel so much so that avoid high amounts of shear stress which is detrimental for cell viability and cell proliferation. Rheology analysis was done on several hydrogels composed of different percentages of components: alginate, collagen, and gelatin. The results have led to the combination of percentages collagen:alginate:gelatin (1:4:8)% as the best condition which makes sol-gel transition at room temperature possible. The results have shown the highest diffusion rate and cell viability for the cross-linked sample with 1.5% CaCl2 for the duration of 1 h. Finally, we have succeeded in printing the hydrogel that is mechanically strong with suitable degradation rate and cell viability.


Author(s):  
Petr Dzik ◽  
Magdalena Morozová ◽  
Petr Klusoň ◽  
Michal Veselý

AbstractAn optimized reverse micelles sol-gel composition was deposited by inkjet direct patterning onto glass supports. Experimental “material printer” Fujifilm Dimatix 2831 was used for sol patterning. Printing was repeated up to 4 times in wet-to-dry manner and photocatalytic coatings of various thickness were obtained after final thermal calcination. Basic material properties of prepared coating were studied by optical microscopy, electron and atomic force imaging, Raman, XRD and UV-VIS spectrometry. Photocatalytic activity was evaluated by dye and fatty acid degradation rate as well as photoinduced hydrophilic conversion rate. Reverse micelles proved to be viable synthetic route for the preparation of titania coatings with even structure and their compatibility with inkjet direct patterning deposition was demonstrated.


2021 ◽  
Vol 11 (22) ◽  
pp. 11075
Author(s):  
Angela Spoială ◽  
Cornelia-Ioana Ilie ◽  
Luminița Narcisa Crăciun ◽  
Denisa Ficai ◽  
Anton Ficai ◽  
...  

The interconnection of nanotechnology and medicine could lead to improved materials, offering a better quality of life and new opportunities for biomedical applications, moving from research to clinical applications. Magnetite nanoparticles are interesting magnetic nanomaterials because of the property-depending methods chosen for their synthesis. Magnetite nanoparticles can be coated with various materials, resulting in “core/shell” magnetic structures with tunable properties. To synthesize promising materials with promising implications for biomedical applications, the researchers functionalized magnetite nanoparticles with silica and, thanks to the presence of silanol groups, the functionality, biocompatibility, and hydrophilicity were improved. This review highlights the most important synthesis methods for silica-coated with magnetite nanoparticles. From the presented methods, the most used was the Stöber method; there are also other syntheses presented in the review, such as co-precipitation, sol-gel, thermal decomposition, and the hydrothermal method. The second part of the review presents the main applications of magnetite-silica core/shell nanostructures. Magnetite-silica core/shell nanostructures have promising biomedical applications in magnetic resonance imaging (MRI) as a contrast agent, hyperthermia, drug delivery systems, and selective cancer therapy but also in developing magnetic micro devices.


Sign in / Sign up

Export Citation Format

Share Document