scholarly journals The influence of lubricant degradation on measured piston ring film thickness in a fired gasoline reciprocating engine

2019 ◽  
Vol 129 ◽  
pp. 112-123 ◽  
Author(s):  
Rai Singh Notay ◽  
Martin Priest ◽  
Malcolm F. Fox
Keyword(s):  
Film Thickness ◽  
Piston Ring ◽  
Lubricant Degradation ◽  
Reciprocating Engine

Predictive tool for frictional performance of piston ring-pack/liner conjunction

2019 ◽  
Vol 13 (3) ◽  
pp. 5513-5527
Author(s):  
J. W. Tee ◽  
S. H. Hamdan ◽  
W. W. F. Chong
Keyword(s):  
Film Thickness ◽  
Mathematical Models ◽  
Piston Ring ◽  
Published Data ◽  
Predictive Tool ◽  
Frictional Losses ◽  
Fundamental Understanding ◽  
Minimum Film Thickness ◽  
Piston Ring Pack ◽  
Ring Pack

Fundamental understanding of piston ring-pack lubrication is essential in reducing engine friction. This is because a substantial portion of engine frictional losses come from piston-ring assembly. Hence, this study investigates the tribological impact of different piston ring profiles towards engine in-cylinder friction. Mathematical models are derived from Reynolds equation by using Reynolds’ boundary conditions to generate the contact pressure distribution along the complete piston ring-pack/liner conjunction. The predicted minimum film thickness is then used to predict the friction generated between the piston ring-pack and the engine cylinder liner. The engine in-cylinder friction is predicted using Greenwood and Williamson’s rough surface contact model. The model considers both the boundary friction and the viscous friction components. These mathematical models are integrated to simulate the total engine in-cylinder friction originating from the studied piston ring-pack for a complete engine cycle. The predicted minimum film thickness and frictional properties from the current models are shown to correlate reasonably with the published data. Hence, the proposed mathematical approach prepares a simplistic platform in predicting frictional losses of piston ring-pack/liner conjunction, allowing for an improved fundamental understanding of the parasitic losses in an internal combustion engine.

Comprehensive design methodology for an engine journal bearing

2000 ◽  
Vol 214 (4) ◽  
pp. 401-412 ◽  
Author(s):  
H Hirani ◽  
K Athre ◽  
S Biswas
Keyword(s):  
Film Thickness ◽  
High Speed ◽  
Design Methodology ◽  
Design Procedure ◽  
Maximum Pressure ◽  
Connecting Rod ◽  
Automotive Engine ◽  
Reciprocating Engine ◽  
High Power Output ◽  
Minimum Film Thickness

The trend towards high power output, high speed and low power loss in engines requires a better understanding of bearing behaviour. Research in this area is directed more towards different aspects involved in bearing analyses, rather than providing a comprehensive guideline on design of bearing. This effort compiles the design methodology for selection of diametral clearance and bearing length by limiting the minimum film thickness, maximum pressure and temperature. The design procedure is summarized on the basis of the existing rapid bearing analyses for evaluation of the journal trajectory, minimum film thickness and maximum pressure and simplified thermal analysis. A flow chart is provided for step-by-step bearing design. Finally, two case studies of engine bearings are described: one investigates the VEB bigend connecting-rod bearing for a large industrial reciprocating engine and the other a main crankshaft bearing for an automotive engine. The methodology translates into easy-to-use expressions and the overall procedure is outlined, using practical data to demonstrate how this can be employed effectively by users.

Analysis of Tribological Performance of Piston Ring Lubrication

2011 ◽  
Author(s):  
Yibin Guo ◽  
Wanyou Li ◽  
Dequan Zou ◽  
Xiqun Lu ◽  
Tao He
Keyword(s):  
Film Thickness ◽  
Friction Force ◽  
Power Loss ◽  
Piston Ring ◽  
Design Parameters ◽  
Oil Film ◽  
Starved Lubrication ◽  
Piston Ring Lubrication ◽  
Cylinder Bore ◽  
Lubrication Conditions

In this paper a mixed lubrication model considering lubricant supply conditions on cylinder bore has been developed for the piston ring lubrication. The numerical procedures of both fully flooded and starved lubrication were included in the model. The lubrication equations and boundary conditions at the end of strokes were discussed in detail. The effects of piston ring design parameters, such as ring face profile and ring tension, on oil film thickness, friction force and power loss under fully flooded and starved lubrication conditions due to available lubricant supply on cylinder bore were studied. The simulation results show that the oil available in the inlet region of the oil film is important to the piston ring friction power loss. With different ring face crown heights and tensions, the changes of oil film thickness and friction force were apparent under fully flooded lubrication, but almost no changes were found under starved lubrication except at the end of a stroke. In addition, the oil film thickness and friction force were affected evidently by the ring face profile offsets under both fully flooded and starved lubrication conditions, and the offset towards the combustion chamber made a large contribution to forming thicker oil film during the expansion stroke. So under different lubricant supply conditions on the cylinder bore, the ring profile and tension need to be adjusted to reduce the friction and power loss. Moreover, the effects of lubricant viscosity, surface composite roughness, and engine operating speed on friction force and power loss were also discussed.

scholarly journals An investigation into the oil transport and starvation of piston ring pack

2018 ◽  
Vol 233 (1) ◽  
pp. 112-124 ◽  
Author(s):  
SR Bewsher ◽  
M Mohammadpour ◽  
H Rahnejat ◽  
G Offner ◽  
O Knaus
Keyword(s):  
Film Thickness ◽  
Boundary Conditions ◽  
Piston Ring ◽  
Gasoline Engine ◽  
Reverse Flow ◽  
Lubricant Film ◽  
Total Power ◽  
Lubricant Film Thickness ◽  
Piston Ring Pack ◽  
Ring Pack

In order to accurately predict the lubricant film thickness and generated friction in any tribological contact, it is important to determine appropriate boundary conditions, taking into account the oil availability and extent of starvation. This paper presents a two-dimensional hydrodynamic model of a piston ring pack for prediction of lubricant film thickness, friction and total power loss. The model takes into account starvation caused by reverse flow at the conjunctional inlet wedge, and applied to a ring pack, comprising a compression and scraper ring. Inlet boundaries are calculated for an engine cycle of a four-cylinder, four-stroke gasoline engine operating at 1500 r/min with conditions pertaining to the New European Drive Cycle. The analysis shows the two main sources of starvation: first, due to a physical lack of inlet meniscus and second, due to reverse flow at the inlet wedge significantly affecting the prevailing conditions from the generally assumed idealised boundary conditions. Such an approach has not hitherto been reported in literature.

Measurement of Piston Ring Oil Film Thickness in an Operating Engine

1983 ◽  
Vol 26 (3) ◽  
pp. 325-332 ◽  
Author(s):  
Shoichi Furuhama ◽  
Chikashi Asahi ◽  
Masaru Hiruma
Keyword(s):  
Film Thickness ◽  
Piston Ring ◽  
Oil Film

Analysis of Oil Film Thickness on a Piston Ring of Diesel Engine: Effect of Oil Film Temperature

2001 ◽  
Author(s):  
Yasuo Harigaya ◽  
Michiyoshi Suzuki ◽  
Masaaki Takiguchi
Keyword(s):  
Diesel Engine ◽  
Temperature Distribution ◽  
Heat Flow ◽  
Film Thickness ◽  
Piston Ring ◽  
Reynolds Equation ◽  
Energy Equation ◽  
Two Dimensional ◽  
Oil Film ◽  
The Mean

Abstract This paper describes that an analysis of oil film thickness on a piston ring of diesel engine. The oil film thickness has been performed by using Reynolds equation and unsteady, two-dimensional (2-D) energy equation with a heat generated from viscous dissipation. The temperature distribution in the oil film is calculated by using the energy equation and the mean oil film temperature is computed. Then the viscosity of oil film is estimated by using the mean oil film temperature. The effect of oil film temperature on the oil film thickness of a piston ring was examined. This model has been verified with published experimental results. Moreover, the heat flow at ring and liner surfaces was examined. As a result, the oil film thickness could be calculated by using the viscosity estimated from the mean oil film temperature and the calculated value is agreement with the measured values.

Development of a Laser Fluorescence Technique For Measuring Piston Ring Oil Film Thickness

1980 ◽  
Vol 102 (2) ◽  
pp. 165-170 ◽  
Author(s):  
L. L. Ting
Keyword(s):  
Light Intensity ◽  
Film Thickness ◽  
Piston Ring ◽  
Laser Fluorescence ◽  
Engine Oil ◽  
Fluorescent Light ◽  
Fluorescence Technique ◽  
Thickness Change ◽  
Oil Film ◽  
Cylinder Sleeve

A single cylinder engine equipped with a transparent cylinder sleeve has been used to develop a technique to make visual investigations of piston ring lubrication behavior and engine oil loss mechanism. This paper describes this apparatus and the development of a laser excited oil fluorescence technique for measuring the oil film thickness change between the piston rings and the transparent cylinder sleeve wall. The amount of oil accumulated in the piston-cylinder clearance spaces above and below the ring pack, and those in the inter-ring spaces, can also be observed. Preliminary results showing oil fluorescence light intensity traces indicate that this technique works very well. Quantitative oil film thickness data should be readily obtainable from these traces once the fluorescent light intensity is calibrated.

Sign in / Sign up

Export Citation Format

Share Document