Optimization of ZnO/Ag/ZnO multilayer electrodes obtained by Ion Beam Sputtering for optoelectronic devices

2012 ◽  
Vol 520 (14) ◽  
pp. 4666-4668 ◽  
Author(s):  
A. El Hajj ◽  
B. Lucas ◽  
M. Chakaroun ◽  
R. Antony ◽  
B. Ratier ◽  
...  
Keyword(s):  
Ion Beam ◽  
Optoelectronic Devices ◽  
Ion Beam Sputtering ◽  
Beam Sputtering

Direct Observations of the Epitaxial Growth of Sputtered Ag on Si

1973 ◽  
Vol 31 ◽  
pp. 122-123
Author(s):  
J. S. Maa ◽  
Thos. E. Hutchinson
Keyword(s):  
Epitaxial Growth ◽  
Film Growth ◽  
Ion Beam ◽  
Ion Beam Sputtering ◽  
Microscopy Technique ◽  
Direct Observations ◽  
In Situ Electron Microscopy ◽  
Beam Sputtering ◽  
The Subject

The growth of Ag films deposited on various substrate materials such as MoS2, mica, graphite, and MgO has been investigated extensively using the in situ electron microscopy technique. The three stages of film growth, namely, the nucleation, growth of islands followed by liquid-like coalescence have been observed in both the vacuum vapor deposited and ion beam sputtered thin films. The mechanisms of nucleation and growth of silver films formed by ion beam sputtering on the (111) plane of silicon comprise the subject of this paper. A novel mode of epitaxial growth is observed to that seen previously.The experimental arrangement for the present study is the same as previous experiments, and the preparation procedure for obtaining thin silicon substrate is presented in a separate paper.

TEM Study of Co/Pd and Co/Au Multilayers

1993 ◽  
Vol 51 ◽  
pp. 1036-1037
Author(s):  
A.E.M. De Veirman ◽  
F.J.G. Hakkens ◽  
W.M.J. Coene ◽  
F.J.A. den Broeder
Keyword(s):  
Magnetic Anisotropy ◽  
Ion Beam ◽  
Perpendicular Magnetic Anisotropy ◽  
Optical Recording ◽  
Magnetic Multilayer ◽  
Ion Beam Sputtering ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Beam Sputtering ◽  
Substrate Temperatures

There is currently great interest in magnetic multilayer (ML) thin films (see e.g.), because they display some interesting magnetic properties. Co/Pd and Co/Au ML systems exhibit perpendicular magnetic anisotropy below certain Co layer thicknesses, which makes them candidates for applications in the field of magneto-optical recording. It has been found that the magnetic anisotropy of a particular system strongly depends on the preparation method (vapour deposition, sputtering, ion beam sputtering) as well as on the substrate, underlayer and deposition temperature. In order to get a better understanding of the correlation between microstructure and properties a thorough cross-sectional transmission electron microscopy (XTEM) study of vapour deposited Co/Pd and Co/Au (111) MLs was undertaken (for more detailed results see ref.).The Co/Pd films (with fixed Pd thickness of 2.2 nm) were deposited on mica substrates at substrate temperatures Ts of 20°C and 200°C, after prior deposition of a 100 nm Pd underlayer at 450°C.

Nanocrystalline silicon ( nc-Si ) from single ion beam sputtering

2003 ◽  
Vol 762 ◽  
Author(s):  
Z.B. Zhou ◽  
G.M. Hadi ◽  
R.Q. Cui ◽  
Z.M. Ding ◽  
G. Li
Keyword(s):  
Solar Cell ◽  
Ion Beam ◽  
Nanocrystalline Silicon ◽  
Silicon Films ◽  
Chamber Pressure ◽  
Ion Beam Sputtering ◽  
High Hydrogen ◽  
Beam Sputtering ◽  
Si Films ◽  
Nanocrystalline Silicon Films

AbstractBased on a small set of selected publications on the using of nanocrystalline silicon films (nc-Si) for solar cell from 1997 to 2001, this paper reviews the application of nc-Si films as intrinsic layers in p-i-n solar cells. The new structure of nc-Si films deposited at high chamber pressure and high hydrogen dilution have characters of nanocrystalline grains with dimension about several tens of nanometer embedded in matrix of amorphous tissue and a high volume fraction of crystallinity (60~80%). The new nc-Si material have optical gap of 1.89 eV. The efficiency of this single junction solar cell reaches 8.7%. This nc-Si layer can be used not only as an intrinsic layer and as a p-type layer. Also nanocrystalline layer may be used as a seed layer for the growth of polycrystalline Si films at a low temperature.We used single ion beam sputtering methods to synthesize nanocrystalline silicon films successfully. The films were characterized with the technique of X-ray diffraction, Atomic Force Micrographs. We found that the films had a character of nc-amorphous double phase structure. Conductivity test at different temperatures presented the transportation of electrons dominated by different mechanism within different temperature ranges. Photoconductivity gains of the material were obtained in our recent investigation.

Formation of Luminescent Si Nanocrystals by High-Temperature Annealing of Ion-Beam-Sputtered Si/SiO2 Multilayers

2003 ◽  
Vol 775 ◽  
Author(s):  
Suk-Ho Choi ◽  
Jun Sung Bae ◽  
Kyung Jung Kim ◽  
Dae Won Moon
Keyword(s):  
Quantum Confinement ◽  
Radiative Recombination ◽  
Ion Beam ◽  
Quantum Confinement Effect ◽  
Visible Range ◽  
Ion Beam Sputtering ◽  
Transmission Electron ◽  
Si Nanocrystals ◽  
Beam Sputtering ◽  
Microscopy Images

AbstractSi/SiO2 multilayers (MLs) have been prepared under different deposition temperatures (TS) by ion beam sputtering. The annealing at 1200°C leads to the formation of Si nanocrystals in the Si layer of MLs. The high resolution transmission electron microscopy images clearly demonstrate the existence of Si nanocrystals, which exhibit photoluminescence (PL) in the visible range when TS is ≥ 300°C. This is attributed to well-separation of nanocrystals in the higher-TS samples, which is thought to be a major cause for reducing non-radiative recombination in the interface between Si nanocrystal and surface oxide. The visible PL spectra are enhanced in its intensity and are shifted to higher energy by increasing TS. These PL behaviours are consistent with the quantum confinement effect of Si nanocrystals.

Preparation of thin films of (Tb,Dy)Fe2 giant magnetostrictive alloy by ion beam sputtering process.

1996 ◽  
Vol 8 (1/2) ◽  
pp. 27-28
Author(s):  
Mitsuhiro WADA ◽  
Yoshihito MATSUMURA ◽  
Hirohisa UCHIDA ◽  
Haru-Hisa UCHIDA ◽  
Hideo KANEKO
Keyword(s):  
Thin Films ◽  
Ion Beam ◽  
Ion Beam Sputtering ◽  
Beam Sputtering

Properties of indium oxide/tin oxide multilayered films prepared by ion-beam sputtering

1988 ◽  
Vol 23 (8) ◽  
pp. 3026-3030 ◽  
Author(s):  
Takeyuki Suzuki ◽  
Tsutomu Yamazaki ◽  
Harunobu Oda
Keyword(s):  
Indium Oxide ◽  
Tin Oxide ◽  
Ion Beam ◽  
Ion Beam Sputtering ◽  
Multilayered Films ◽  
Beam Sputtering

Influence of ion beam parameters onto two-dimensional optical thin film thickness distributions deposited by ion beam sputtering

2019 ◽  
Vol 682 ◽  
pp. 109-120 ◽  
Author(s):  
Wjatscheslaw Sakiew ◽  
Stefan Schrameyer ◽  
Marco Jupé ◽  
Philippe Schwerdtner ◽  
Nick Erhart ◽  
...  
Keyword(s):  
Thin Film ◽  
Film Thickness ◽  
Ion Beam ◽  
Two Dimensional ◽  
Ion Beam Sputtering ◽  
Thin Film Thickness ◽  
Optical Thin Film ◽  
Beam Sputtering ◽  
Beam Parameters

scholarly journals Micrometer-scale machining of metals and polymers enabled by focused ion beam sputtering

1998 ◽  
Vol 546 ◽  
Author(s):  
D. P. Adams ◽  
G. L. Benavides ◽  
M. J. vasile
Keyword(s):  
Focused Ion Beam ◽  
Ion Beam ◽  
Ion Beam Sputtering ◽  
Beam Sputtering ◽  
End Mills ◽  
Ultra Precision ◽  
Tool Shank ◽  
Micrometer Scale ◽  
Tool Cutting ◽  
Micro Tools

AbstractThis work combines focused ion beam sputtering and ultra-precision machining for microfabrication of metal alloys and polymers. Specifically, micro-end mills are made by Ga ion beam sputtering of a cylindrical tool shank. Using an ion energy of 20keV, the focused beam defines the tool cutting edges that have submicrometer radii of curvature. We demonstrate 25μm diameter micromilling tools having 2, 4 and 5 cutting edges. These tools fabricate fine channels, 26–28 microns wide, in 6061 aluminum, brass, and polymethyl methacrylate. Micro-tools are structurally robust and operate for more than 5 hours without fracture.

Sign in / Sign up

Export Citation Format

Share Document