Robust variance control for systems with finite-signal-to-noise uncertainty

Noise uncertainty and signal-to-noise ratio (SNR) wall are two very serious problems in spectrum sensing of cognitive radio (CR) networks, which restrict the applications of some conventional spectrum sensing methods especially under low SNR circumstances. In this study, an optimal dynamic stochastic resonance (SR) processing method is introduced to improve the SNR of the receiving signal under certain conditions. By using the proposed method, the SNR wall can be enhanced and the sampling complexity can be reduced, accordingly the noise uncertainty of the received signal can also be decreased. Based on the well-studied overdamped bistable SR system, the theoretical analyses and the computer simulations verify the effectiveness of the proposed approach. It can extend the application scenes of the conventional energy detection especially under some serious wireless conditions especially low SNR circumstances such as deep wireless signal fading, signal shadowing and multipath fading.

Download Full-text

Radiation Damage, Contrast and Statistics in High Resolution Biological Electron Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100068291 ◽

1970 ◽

Vol 28 ◽

pp. 260-261

Author(s):

Robert M. Glaeser

Keyword(s):

High Resolution ◽

Particle Flux ◽

Unit Area ◽

Signal To Noise ◽

Resolution Image ◽

High Resolution Image ◽

Pass Through ◽

Counting Statistics ◽

The Relationship ◽

Picture Element

It is well known that a large flux of electrons must pass through a specimen in order to obtain a high resolution image while a smaller particle flux is satisfactory for a low resolution image. The minimum particle flux that is required depends upon the contrast in the image and the signal-to-noise (S/N) ratio at which the data are considered acceptable. For a given S/N associated with statistical fluxtuations, the relationship between contrast and “counting statistics” is s131_eqn1, where C = contrast; r2 is the area of a picture element corresponding to the resolution, r; N is the number of electrons incident per unit area of the specimen; f is the fraction of electrons that contribute to formation of the image, relative to the total number of electrons incident upon the object.

Download Full-text

Determination of the Best Emulsion for the Microscopy of Crystals

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096886 ◽

1981 ◽

Vol 39 ◽

pp. 32-33

Author(s):

David A. Grano ◽

Kenneth H. Downing

Keyword(s):

Spatial Frequency ◽

Information Transfer ◽

Signal To Noise Ratio ◽

Experimental Situation ◽

Photographic Emulsion ◽

Modulation Transfer ◽

Signal To Noise ◽

Frequency Space ◽

Noise Ratio

The retrieval of high-resolution information from images of biological crystals depends, in part, on the use of the correct photographic emulsion. We have been investigating the information transfer properties of twelve emulsions with a view toward 1) characterizing the emulsions by a few, measurable quantities, and 2) identifying the “best” emulsion of those we have studied for use in any given experimental situation. Because our interests lie in the examination of crystalline specimens, we've chosen to evaluate an emulsion's signal-to-noise ratio (SNR) as a function of spatial frequency and use this as our critereon for determining the best emulsion.The signal-to-noise ratio in frequency space depends on several factors. First, the signal depends on the speed of the emulsion and its modulation transfer function (MTF). By procedures outlined in, MTF's have been found for all the emulsions tested and can be fit by an analytic expression 1/(1+(S/S0)2). Figure 1 shows the experimental data and fitted curve for an emulsion with a better than average MTF. A single parameter, the spatial frequency at which the transfer falls to 50% (S0), characterizes this curve.

Download Full-text

Experiments in Bright-Field Imaging with Hollow-Cone Illumination

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100097703 ◽

1981 ◽

Vol 39 ◽

pp. 226-227

Author(s):

W. Kunath ◽

K. Weiss ◽

E. Zeitler

Keyword(s):

Signal To Noise Ratio ◽

Carbon Support ◽

Electronic System ◽

Optic Axis ◽

Hollow Cone ◽

Signal To Noise ◽

Bright Field ◽

Noise Ratio ◽

Single Field ◽

Field Imaging

Bright-field images taken with axial illumination show spurious high contrast patterns which obscure details smaller than 15 ° Hollow-cone illumination (HCI), however, reduces this disturbing granulation by statistical superposition and thus improves the signal-to-noise ratio. In this presentation we report on experiments aimed at selecting the proper amount of tilt and defocus for improvement of the signal-to-noise ratio by means of direct observation of the electron images on a TV monitor.Hollow-cone illumination is implemented in our microscope (single field condenser objective, Cs = .5 mm) by an electronic system which rotates the tilted beam about the optic axis. At low rates of revolution (one turn per second or so) a circular motion of the usual granulation in the image of a carbon support film can be observed on the TV monitor. The size of the granular structures and the radius of their orbits depend on both the conical tilt and defocus.

Download Full-text

Ultra-spatially resolved synchrotron powered FT-IR microspectroscopy of individual cells of biological material

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100140798 ◽

1995 ◽

Vol 53 ◽

pp. 884-885

Author(s):

David L. Wetzel ◽

John A. Reffner ◽

Gwyn P. Williams

Keyword(s):

Thermal Noise ◽

Spot Size ◽

Acquisition Time ◽

Thermal Source ◽

Signal To Noise ◽

Spatially Resolved ◽

Good Spatial Resolution ◽

Small Spot ◽

Ft Ir ◽

Ir Microspectroscopy

Synchrotron radiation is 100 to 1000 times brighter than a thermal source such as a globar. It is not accompanied with thermal noise and it is highly directional and nondivergent. For these reasons, it is well suited for ultra-spatially resolved FT-IR microspectroscopy. In efforts to attain good spatial resolution in FT-IR microspectroscopy with a thermal source, a considerable fraction of the infrared beam focused onto the specimen is lost when projected remote apertures are used to achieve a small spot size. This is the case because of divergence in the beam from that source. Also the brightness is limited and it is necessary to compromise on the signal-to-noise or to expect a long acquisition time from coadding many scans. A synchrotron powered FT-IR Microspectrometer does not suffer from this effect. Since most of the unaperatured beam’s energy makes it through even a 12 × 12 μm aperture, that is a starting place for aperture dimension reduction.

Download Full-text

Resolution assessment from spectral signal-to-noise ratios

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100128043 ◽

1987 ◽

Vol 45 ◽

pp. 746-747

Author(s):

M. Unser ◽

B.L. Trus ◽

A.C. Steven

Keyword(s):

Electron Microscopy ◽

Limiting Factor ◽

Biological Macromolecules ◽

Signal To Noise ◽

Differential Phase ◽

Traditional Measure ◽

Spectral Signal ◽

Two Measures ◽

Diffraction Patterns ◽

Averaging Techniques

Since the resolution-limiting factor in electron microscopy of biological macromolecules is not instrumental, but is rather the preservation of structure, operational definitions of resolution have to be based on the mutual consistency of a set of like images. The traditional measure of resolution for crystalline specimens in terms of the extent of periodic reflections in their diffraction patterns is such a criterion. With the advent of correlation averaging techniques for lattice rectification and the analysis of non-crystalline specimens, a more general - and desirably, closely compatible - resolution criterion is needed. Two measures of resolution for correlation-averaged images have been described, namely the differential phase residual (DPR) and the Fourier ring correlation (FRC). However, the values that they give for resolution often differ substantially. Furthermore, neither method relates in a straightforward way to the long-standing resolution criterion for crystalline specimens.

Download Full-text

Correlation averaging of two-dimensional crystals: basic strategy and refinements

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100142323 ◽

1986 ◽

Vol 44 ◽

pp. 136-139

Author(s):

W. Baumeister ◽

R. Rachel ◽

R. Guckenberger ◽

R. Hegerl

Keyword(s):

Low Dose ◽

Signal To Noise Ratio ◽

Real Space ◽

Fourier Domain ◽

Two Dimensional ◽

Signal To Noise ◽

Unit Cells ◽

Lateral Displacements ◽

Established Technique ◽

Crystalline Array

IntroductionCorrelation averaging (CAV) is meanwhile an established technique in image processing of two-dimensional crystals /1,2/. The basic idea is to detect the real positions of unit cells in a crystalline array by means of correlation functions and to average them by real space superposition of the aligned motifs. The signal-to-noise ratio improves in proportion to the number of motifs included in the average. Unlike filtering in the Fourier domain, CAV corrects for lateral displacements of the unit cells; thus it avoids the loss of resolution entailed by these distortions in the conventional approach. Here we report on some variants of the method, aimed at retrieving a maximum of information from images with very low signal-to-noise ratios (low dose microscopy of unstained or lightly stained specimens) while keeping the procedure economical.

Download Full-text

Methylamine vanadate (nanovan) negative stain

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100168396 ◽

1994 ◽

Vol 52 ◽

pp. 132-133

Author(s):

James F. Hainfeld ◽

Daniel Safer ◽

Joseph S. Wall ◽

Martha Simon ◽

Beth Lin ◽

...

Keyword(s):

Electron Beam ◽

Low Dose ◽

Biological Molecules ◽

Positive Staining ◽

Signal To Noise ◽

Negative Stain ◽

Beam Attenuation ◽

Coarse Grains ◽

Lower Contrast

Uranyl and tungstate compounds have found favor as negative stains because of their high scattering power relative to biological molecules. However, other properties, such as specimen preservation, resistance to alterations or crystallization in the electron beam, and signal to noise (S/N) ratio, are also important. It may be that lower density materials may have advantages in these areas. A new negative stain, methylamine vanadate, CH3 NH2.VO3 ("NanoVan"), offers a near physiological pH of 8, similar to phosphotungstate (pH 7) with much smoother background. It is also very stable in the electron beam with minimal granulation at a dose of l04 el / nm2 . The resolution obtainable with vanadate appears to be comparable to uranyl at low dose, but superior at higher dose where uranyl forms coarse grains (see Fig. 1). Problems with uranyl such as unwanted positive staining and need for pH below 4 can be avoided. The lower contrast permits use of thicker stain embedment for better preservation and less flattening without excessive beam attenuation.

Download Full-text

Grain separation enhanced magnetic coercivity in Pt/Co multilayers.

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100151027 ◽

1993 ◽

Vol 51 ◽

pp. 1038-1039 ◽

Cited By ~ 1

Author(s):

G.A. Bertero ◽

R. Sinclair

Keyword(s):

Remanent Magnetization ◽

Strong Influence ◽

Uniaxial Anisotropy ◽

Magnetic Coupling ◽

Recording Media ◽

Magnetic Media ◽

Signal To Noise ◽

Out Of Plane ◽

Longitudinal Recording ◽

The Relationship

Pt/Co multilayers displaying perpendicular (out-of-plane) magnetic anisotropy and 100% perpendicular remanent magnetization are strong candidates as magnetic media for the next generation of magneto-optic recording devices. The magnetic coercivity, Hc, and uniaxial anisotropy energy, Ku, are two important materials parameters, among others, in the quest to achieving higher recording densities with acceptable signal to noise ratios (SNR). The relationship between Ku and Hc in these films is not a simple one since features such as grain boundaries, for example, can have a strong influence on Hc but affect Ku only in a secondary manner. In this regard grain boundary separation provides a way to minimize the grain-to-grain magnetic coupling which is known to result in larger coercivities and improved SNR as has been discussed extensively in the literature for conventional longitudinal recording media.We present here results from the deposition of two Pt/Co/Tb multilayers (A and B) which show significant differences in their coercive fields.

Download Full-text