Consumer Preferences for Sustainable Wine Attributes: A Conjoint Analysis

AbstractMid-Atlantic wine consumers participated in an Internet survey to determine which of three attributes (retail base prices, Botrytis cinerea [bunch rot] control measure, or weed-control strategy) and attribute levels (e.g., a retail base price of $12, $16, $22, or $26) were the most important factors in their decisions to purchase 750mL glass bottles of wine. Conjoint analysis was used to calculate average importance for the three attributes. Based on these calculations, the base retail price attribute had the greatest impact on participants’ decision to purchase the wine (57.40%), followed by bunch rot control measure (20.76%) and weed control strategy (21.49%). Participants were also asked to indicate how interested (not at all interested to extremely interested) they were in purchasing wines produced from grapes grown using minimal pesticides or with cover crops to control weeds. Separate conjoint analyses were then performed based on participants’ level of interest in the two sustainable production methods. In both instances, the average importance values for retail base price were still higher than the values for either bunch rot or weed control strategies. Average importance values for price were lower for participants who responded that they were “very” or “extremely interested” in purchasing wine produced with minimal pesticides or with cover crops than for participants who were “not all interested” in purchasing such wines. (JEL Classifications: Q18, Q11, M31)

Download Full-text

Comparison of weed control techniques to establish three ground cover species

New Zealand Plant Protection ◽

10.30843/nzpp.2010.63.6542 ◽

2010 ◽

Vol 63 ◽

pp. 96-101 ◽

Cited By ~ 1

Author(s):

C.L. Foo ◽

K.C. Harrington ◽

M.B. MacKay

Keyword(s):

Weed Control ◽

Control Strategy ◽

Control Strategies ◽

Ground Cover ◽

Late Spring ◽

Control Techniques

Weed control strategies for establishing three ground cover species were investigated by planting them in late spring then assessing eight different control treatments during the following 14 months The prostrate woody Coprosma acerosa Taiko established best with black weed mat mulch and EcoCover paper mulch although bark mulches also gave reasonable establishment rates The brittle succulent Sedum mexicanum Acapulco Gold also established well with black weed mat and paper mulch although a sawdust mulch was particularly suitable The frostprone Polygonum capitatum which regrows readily from seed did best with soil kept bare by handhoeing or selective herbicides although the paper mulch also rated well Thus the best weed control strategy varied depending on the characteristics of the ground cover being established Other considerations including relative costs are also discussed

Download Full-text

Effect of the use of pre- and post-emergence herbicides on nodulation and production of cowpea (Vigna unguiculata L.) in the Amazonian savannah

Agronomía Colombiana ◽

10.15446/agron.colomb.v38n2.82196 ◽

2020 ◽

Vol 38 (2) ◽

pp. 280-286

Author(s):

Anna Bárbara De Souza Cruz ◽

José de Anchieta Alves de Albuquerque ◽

Paulo Roberto Ribeiro Rocha ◽

Leandro Torres de Souza ◽

Diego Lima de Souza Cruz ◽

...

Keyword(s):

Grain Yield ◽

Root System ◽

Weed Control ◽

Dry Matter ◽

System Development ◽

Control Strategies ◽

Control Measure ◽

Block Design ◽

Root System Development ◽

Randomized Block Design

As a control measure against weeds, the use of herbicides is an effective and inexpensive alternative. However, there are no products recommended for the cultivation of cowpea in Brazil, making it necessary to search for alternative solutions. The objective of this study was to evaluate the effect of herbicides applied in the pre- and post-emergence on cowpea nodulation and production under conditions of the Amazonian savannah. Two experiments were carried out in a randomized block design with four replicates, using the cowpea cultivar BRS Aracê subjected to the pre-emergence herbicides: Metribuzin, Sulfentrazone, Smetolachlor, Pendimethalin, Oxadiazon, Alachlor, Metribuzin + Pendimethalin, Metribuzin + Alachlor and Quizalofop-p-ethyl, Bentazon, Fomesafen, Imazethapyr, Imazamox + Bentazon, Quizalofop-p-ethyl + Imazethapyr, Quizalofop-p-ethyl + Imazamox and Quizalofop-p-ethyl + Bentazon, and post-emergence herbicides: Quizalofop-p-ethyl, Bentazon, Fomesafen, Imazethapyr, Imazamox + Bentazon, Quizalofop-p-ethyl + Imazethapyr, Quizalofop-p-ethyl + Imazamox, and Quizalofop-p-ethyl + Bentazon. The number of nodules in each plant, the dry matter of nodules, dry matter of roots and the grain yield were evaluated. According to the results obtained, the management of weeds in pre- or post-emergence according to the herbicide used affects the nodulation and productivity of cowpea under the conditions of the Amazonian savannah. The herbicides Metribuzin in preemergence,and Fomesafen and the mixture of Quizalofop-pethyl + Imazethapyr in post-emergence are not recommended for weed control in cowpea. The application of Oxadiazon, Alachlor, and Pendimethalin in pre-emergence can be considered interesting because they do not inhibit the development of the root system or the nodulation of cowpea which provides agreater grain yield. Regarding weed control strategies at postemergence, the application of the herbicide Imazethapyr and the combination of the herbicides quizalofop-p-ethyl + imazamox, Quizalofop-p-ethyl + Bentazon and Imazamox + Bentazon allow satisfactory levels of grain yield, root system development and nodulation of cowpea.

Download Full-text

INTEGRAÇÃO DE PRÁTICAS PARA O MANEJO DE PLANTAS DANINHAS NA CULTURA DO MILHO

Scientia Agraria ◽

10.5380/rsa.v12i2.33724 ◽

2011 ◽

Vol 12 (2) ◽

Author(s):

Alvadi Antonio BALBINOT JUNIOR ◽

Gilcimar Adriano VOGT ◽

Michelangelo Muzell TREZZI

Keyword(s):

Weed Control ◽

Cover Crops ◽

Weed Management ◽

Management Practices ◽

Plant Density ◽

Control Strategies ◽

Dry Mass ◽

Corn Yield ◽

Weed Infestation ◽

Narrow Row

As práticas de manejo do solo e de culturas podem afetar diretamente a infestação de plantas daninhas na cultura do milho. O objetivo desse trabalho foi avaliar o efeito da integração de práticas culturais e químicas na infestação de plantas daninhas e na produtividade da cultura do milho. Foi conduzido um experimento em Papanduva, SC, em delineamento experimental de blocos ao acaso, com três repetições e parcelas subdivididas. Nas parcelas foram avaliados dois sistemas de manejo cultural de plantas daninhas: S1 (cultivo de consórcio de espécies para cobertura do solo no inverno, uso de sementes de milho com elevada massa e espaçamento entre fileiras de 0,45 m) e S2 (pousio no inverno, uso de sementes de milho com baixa massa e espaçamento entre fileiras de 0,90 m). Nas subparcelas foram avaliadas quatro estratégias de controle de plantas daninhas no milho (sem controle, atrazine, atrazine+mesotrione e capina). Avaliaram-se a quantidade de palha no momento da semeadura do milho, a velocidade de decomposição da palha, a densidade e a massa seca da parte aérea de plantas daninhas e o desempenho da cultura de milho. O uso de práticas culturais para o manejo de plantas daninhas promoveu redução da infestação dessas plantas na cultura de milho, além de aumentar a produtividade da cultura. A aplicação de atrazine + mesotrione proporcionou melhor controle de plantas daninhas e maior produtividade de grãos em relação à aplicação isolada de atrazine. ABSTRACT Soil and crop management can affect the weed population in corn. The experiment was carried out to evaluate the effect of cultural and chemical management practices on weed infestation and corn yield. The experiment was carried out in Papanduva, SC, Brazil. The experimental design was a randomized complete blocks with three replications in a split-plot arrangement. In plots were evaluated two cultural weed management systems: S1 (multicropping of winter cover crops, corn seeds with high weight and narrow row of 0.45 m) and S2 (winter fallow, corn seeds with low weight and narrow row of 0.90 m). In subplots were evaluated four weed control strategies (no-control, atrazine, atrazine + mesotrione and weeding). The parameters evaluated were the straw quantity, residue decomposition, weed plant density and shoot dry mass and corn performance. The use of cultural weed management practices reduced the weed infestation on corn and improved the crop yield. The association of atrazine + mesotrione herbicides showed more efficient weed control than atrazine.

Download Full-text

201 ALTERNATIVE WEED CONTROL STRATEGIES FOR STRAWBERRIES IN THE ESTABLISHMENT YEAR

HortScience ◽

10.21273/hortsci.29.5.458a ◽

1994 ◽

Vol 29 (5) ◽

pp. 458a-458

Author(s):

Charlotte Herman ◽

Emily Hoover

Keyword(s):

Weed Control ◽

Cover Crops ◽

Weed Management ◽

Cover Crop ◽

Plant Material ◽

Control Strategies ◽

First Year ◽

Strawberry Plant ◽

Stage Of Development ◽

Alternative Weed Control

The objective of our study was to establish first year strawberry plantings without using herbicides. `Honeyoye' transplants were set into plots measuring 6.1m × 7.32m on 21 May, 1993. Four treatments were established: winter wheat, a dwarf Brassica sp., napropamide (2.24kg/h), and no weed management. After the strawberry plants, cover crops (and some weeds) were fairly well established, (18 June) 6 week-old African “weeder” geese were put into half of each plot to graze. Weekly data was taken on the percentage of soil area covered with plant material, height and stage of development of plants, and weeds present. A weed transect was done in 6 July. Plant material was collected from each plot on 26 July and 16 Sept. in a 0.2m2 area, and dried. The most promising cover crop treatment was the dwarf Brassica for early season weed control. However, the herbicide treatment with no geese produced the best strawberry plant growth.

Download Full-text

Cover crops to secure weed control strategies in a maize crop with reduced tillage

Field Crops Research ◽

10.1016/j.fcr.2019.107583 ◽

2020 ◽

Vol 247 ◽

pp. 107583 ◽

Cited By ~ 1

Author(s):

Lucie Büchi ◽

Marina Wendling ◽

Camille Amossé ◽

Bernard Jeangros ◽

Raphaël Charles

Keyword(s):

Weed Control ◽

Cover Crops ◽

Control Strategies ◽

Reduced Tillage ◽

Maize Crop

Download Full-text

Establishing white clover (Trifolium repens) as a living mulch: weed control and herbicide tolerance

Weed Technology ◽

10.1017/wet.2021.45 ◽

2021 ◽

pp. 1-28

Author(s):

Nicholas T. Basinger ◽

Nicholas S. Hill

Keyword(s):

Weed Control ◽

White Clover ◽

Cover Crops ◽

Herbicide Tolerance ◽

Single Application ◽

Weed Species ◽

Living Mulch ◽

Herbicide Resistant ◽

Research And Education ◽

Weed Emergence

Abstract With the increasing focus on herbicide-resistant weeds and the lack of introduction of new modes of action, many producers have turned to annual cover crops as a tool for reducing weed populations. Recent studies have suggested that perennial cover crops such as white clover could be used as living mulch. However, white clover is slow to establish and is susceptible to competition from winter weeds. Therefore, the objective of this study was to determine clover tolerance and weed control in established stands of white clover to several herbicides. Studies were conducted in the fall and winter of 2018 to 2019 and 2019 to 2020 at the J. Phil Campbell Research and Education Center in Watkinsville, GA, and the Southeast Georgia Research and Education Center in Midville, GA. POST applications of imazethapyr, bentazon, or flumetsulam at low and high rates, or in combination with 2,4-D and 2,4-DB, were applied when clover reached 2 to 3 trifoliate stage. Six weeks after the initial POST application, a sequential application of bentazon and flumetsulam individually, and combinations of 2,4-D, 2,4-DB, and flumetsulam were applied over designated plots. Clover biomass was similar across all treatments except where it was reduced by sequential applications of 2,4-D + 2,4-DB + flumetsulam in the 2019 to 2020 season indicating that most treatments were safe for use on establishing living mulch clover. A single application of flumetsulam at the low rate or a single application of 2,4-D + 2,4-DB provided the greatest control of all weed species while minimizing clover injury when compared to the non-treated check. These herbicide options allow for control of problematic winter weeds during clover establishment, maximizing clover biomass and limiting canopy gaps that would allow for summer weed emergence.

Download Full-text

Evaluation of a home-based 7-day infection control strategy for healthcare workers following high-risk exposure to severe acute respiratory coronavirus virus 2 (SARS-CoV-2): A cohort study

Infection Control and Hospital Epidemiology ◽

10.1017/ice.2020.1389 ◽

2020 ◽

pp. 1-4

Author(s):

Carla Benea ◽

Laura Rendon ◽

Jesse Papenburg ◽

Charles Frenette ◽

Ahmed Imacoudene ◽

...

Keyword(s):

High Risk ◽

Infection Control ◽

Control Strategy ◽

Healthcare Workers ◽

Control Strategies ◽

Risk Exposure ◽

Nasopharyngeal Swab ◽

Home Based ◽

Respiratory Coronavirus ◽

Second Wave

Abstract Objective: Evidence-based infection control strategies are needed for healthcare workers (HCWs) following high-risk exposure to severe acute respiratory coronavirus virus 2 (SARS-CoV-2). In this study, we evaluated the negative predictive value (NPV) of a home-based 7-day infection control strategy. Methods: HCWs advised by their infection control or occupational health officer to self-isolate due to a high-risk SARS-CoV-2 exposure were enrolled between May and October 2020. The strategy consisted of symptom-triggered nasopharyngeal SARS-CoV-2 RNA testing from day 0 to day 7 after exposure and standardized home-based nasopharyngeal swab and saliva testing on day 7. The NPV of this strategy was calculated for (1) clinical coronavirus disease 2019 (COVID-19) diagnosis from day 8–14 after exposure, and for (2) asymptomatic SARS-CoV-2 detected by standardized nasopharyngeal swab and saliva specimens collected at days 9, 10, and 14 after exposure. Interim results are reported in the context of a second wave threatening this essential workforce. Results: Among 30 HCWs enrolled, the mean age was 31 years (SD, ±9), and 24 (80%) were female. Moreover, 3 were diagnosed with COVID-19 by day 14 after exposure (secondary attack rate, 10.0%), and all cases were detected using the 7-day infection control strategy: the NPV for subsequent clinical COVID-19 or asymptomatic SARS-CoV-2 detection by day 14 was 100.0% (95% CI, 93.1%–100.0%). Conclusions: Among HCWs with high-risk exposure to SARS-CoV-2, a home-based 7-day infection control strategy may have a high NPV for subsequent COVID-19 and asymptomatic SARS-CoV-2 detection. Ongoing data collection and data sharing are needed to improve the precision of the estimated NPV, and here we report interim results to inform infection control strategies in light of a second wave threatening this essential workforce.

Download Full-text

Spring-planted cover crops for weed control in soybean

Renewable Agriculture and Food Systems ◽

10.1017/s1742170521000107 ◽

2021 ◽

pp. 1-8

Author(s):

Katja Koehler-Cole ◽

Christopher A. Proctor ◽

Roger W. Elmore ◽

David A. Wedin

Keyword(s):

Weed Control ◽

Biomass Production ◽

Cover Crops ◽

Weed Management ◽

Block Design ◽

Weed Suppression ◽

Crop Species ◽

Cold Temperatures ◽

Weed Biomass ◽

Small Grains

Abstract Replacing tillage with cover crops (CC) for weed management in corn (Zea mays L.)-soybean [Glycine max (L.) Merr.] systems with mechanical weed control has many soil health benefits but in the western Corn Belt, CC establishment after harvest is hampered by cold temperatures, limited labor and few compatible CC species. Spring-planted CC may be an alternative, but information is lacking on suitable CC species. Our objective was to evaluate four spring-planted CC with respect to biomass production and weed suppression, concurrent with CC growth and post-termination. Cover crop species tested were oat (Avena sativa L.), barley (Hordeum vulgare L.), brown mustard [Brassica juncea (L.) Czern.] and yellow mustard (Brassica hirta Moench). They were compared to no-CC treatments that were either tilled pre- and post-planting of soybean (no-CC tilled) or not tilled at all (no-CC weedy). CC were planted in late March to early April, terminated 52–59 days later using an undercutter, and soybean was planted within a week. The experiment had a randomized complete block design with four replications and was repeated for 3 years. Mustards and small grains produced similar amounts of biomass (1.54 Mg ha−1) but mustard biomass production was more consistent (0.85–2.72 Mg ha−1) than that of the small grains (0.35–3.81 Mg ha−1). Relative to the no-CC weedy treatment, mustards suppressed concurrent weed biomass in two out of 3 years, by 31–97%, and small grains suppressed concurrent weed biomass in only 1 year, by 98%. Six weeks after soybean planting, small grains suppressed weed biomass in one out of 3 years, by 79% relative to the no-CC weedy treatment, but mustards did not provide significant weed suppression. The no-CC tilled treatment suppressed weeds each year relative to the no-CC weedy treatment, on average 87%. The ineffective weed control by CC reduced soybean biomass by about 50% six weeks after planting. While spring-planted CC have the potential for pre-plant weed control, they do not provide adequate early season weed suppression for soybean.

Download Full-text

Application of Combined Feedforward and Feedback Controller With Shaped Input to Benchmark Problem

Journal of Dynamic Systems Measurement and Control ◽

10.1115/1.4000651 ◽

2010 ◽

Vol 132 (2) ◽

Cited By ~ 4

Author(s):

Young Joo Shin ◽

Peter H. Meckl

Keyword(s):

Feedback Control ◽

Control Strategy ◽

Control Strategies ◽

Control Design ◽

Single Frequency ◽

Benchmark Problems ◽

Control Force ◽

Benchmark Problem ◽

Advantages And Disadvantages ◽

Robust Control Design

Benchmark problems have been used to evaluate the performance of a variety of robust control design methodologies by many control engineers over the past 2 decades. A benchmark is a simple but meaningful problem to highlight the advantages and disadvantages of different control strategies. This paper verifies the performance of a new control strategy, which is called combined feedforward and feedback control with shaped input (CFFS), through a benchmark problem applied to a two-mass-spring system. CFFS, which consists of feedback and feedforward controllers and shaped input, can achieve high performance with a simple controller design. This control strategy has several unique characteristics. First, the shaped input is designed to extract energy from the flexible modes, which means that a simpler feedback control design based on a rigid-body model can be used. In addition, only a single frequency must be attenuated to reduce residual vibration of both masses. Second, only the dynamics between control force and the first mass need to be considered in designing both feedback and feedforward controllers. The proposed control strategy is applied to a benchmark problem and its performance is compared with that obtained using two alternative control strategies.

Download Full-text