scholarly journals Non-axisymmetric rotating-disk flows: nonlinear travelling-wave states

2000 ◽  
Vol 413 ◽  
pp. 287-316 ◽  
Author(s):  
R. E. HEWITT ◽  
P. W. DUCK
Keyword(s):  
Boundary Layer ◽  
Stokes Equations ◽  
Rotating Disk ◽  
Travelling Wave ◽  
Numerical Results ◽  
Navier Stokes ◽  
Rotating Fluid ◽  
Navier Stokes Equations ◽  
Axisymmetric Solution ◽  
Wave States

We consider the classical problem of the laminar flow of an incompressible rotating fluid above a rotating, impermeable, infinite disk. There is a well-known class of solutions to this configuration in the form of an exact axisymmetric solution to the Navier–Stokes equations. However, the radial self-similarity that leads to the ‘rotating- disk equations’ can also be used to obtain solutions that are non-axisymmetric in nature, although (in general) this requires a boundary-layer approximation. In this manner, we locate several new solution branches, which are non-axisymmetric travelling-wave states that satisfy axisymmetric boundary conditions at infinity and at the disk. These states are shown to appear as symmetry-breaking bifurcations of the well-known axisymmetric solution branches of the rotating-disk equations. Numerical results are presented, which suggest that an infinity of such travelling states exist in some parameter regimes. The numerical results are also presented in a manner that allows their application to the analogous flow in a conical geometry.Two of the many states described are of particular interest. The first is an exact, nonlinear, non-axisymmetric, stationary state for a rotating disk in a counter-rotating fluid; this solution was first presented by Hewitt, Duck & Foster (1999) and here we provide further details. The second state corresponds to a new boundary-layer-type approximation to the Navier–Stokes equations in the form of azimuthally propagating waves in a rotating fluid above a stationary disk. This second state is a new non-axisymmetric alternative to the classical axisymmetric Bödewadt solution.

Numerical Integration of the Navier-Stokes Equations for a Disk Rotating in a Housing

1985 ◽  
Vol 40 (8) ◽  
pp. 789-799 ◽  
Author(s):  
A. F. Borghesani
Keyword(s):  
Boundary Layer ◽  
Cylindrical Cavity ◽  
Boundary Layer Thickness ◽  
Stokes Equations ◽  
Fluid Motion ◽  
Rotating Disk ◽  
Infinite Medium ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Viscous Torque

The Navier-Stokes equations for the fluid motion induced by a disk rotating inside a cylindrical cavity have been integrated for several values of the boundary layer thickness d. The equivalence of such a device to a rotating disk immersed in an infinite medium has been shown in the limit as d → 0. From that solution and taking into account edge effect corrections an equation for the viscous torque acting on the disk has been derived, which depends only on d. Moreover, these results justify the use of a rotating disk to perform accurate viscosity measurements.

Series Solution of Three-Dimensional Unsteady Laminar Viscous Flow Due to a Stretching Surface in a Rotating Fluid

2007 ◽  
Vol 74 (5) ◽  
pp. 1011-1018 ◽  
Author(s):  
Yue Tan ◽  
Shi-Jun Liao
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Viscous Flows ◽  
Current Approach ◽  
Numerical Results ◽  
Navier Stokes ◽  
Rotating Fluid ◽  
Stretching Surface ◽  
Navier Stokes Equations ◽  
Time Region

An analytic technique, namely the homotopy analysis method, is applied to solve the Navier–Stokes equations governing unsteady viscous flows due to a suddenly stretching surface in a rotating fluid. Unlike perturbation methods, the current approach does not depend upon any small parameters at all. Besides contrary to all other analytic techniques, it provides us with a simple way to ensure the convergence of solution series. In contrast to perturbation approximations which have about 40% average errors for the considered problem, our series solutions agree well with numerical results in the whole time region 0⩽t<+∞. Explicit analytic expressions of the skin friction coefficients are given, which agree well with numerical results in the whole time region 0⩽t<+∞. This analytic approach can be applied to solve some complicated three-dimensional unsteady viscous flows governed by the Navier–Stokes equations.

Effects of stator splitter blades on aerodynamic performance of a single-stage transonic axial compressor

2020 ◽  
Vol 14 (4) ◽  
pp. 7369-7378
Author(s):  
Ky-Quang Pham ◽  
Xuan-Truong Le ◽  
Cong-Truong Dinh
Keyword(s):  
Stokes Equations ◽  
Three Dimensional ◽  
Axial Compressor ◽  
Aerodynamic Performance ◽  
Numerical Results ◽  
Single Stage ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Operating Stability ◽  
Length Coverage

Splitter blades located between stator blades in a single-stage axial compressor were proposed and investigated in this work to find their effects on aerodynamic performance and operating stability. Aerodynamic performance of the compressor was evaluated using three-dimensional Reynolds-averaged Navier-Stokes equations using the k-e turbulence model with a scalable wall function. The numerical results for the typical performance parameters without stator splitter blades were validated in comparison with experimental data. The numerical results of a parametric study using four geometric parameters (chord length, coverage angle, height and position) of the stator splitter blades showed that the operational stability of the single-stage axial compressor enhances remarkably using the stator splitter blades. The splitters were effective in suppressing flow separation in the stator domain of the compressor at near-stall condition which affects considerably the aerodynamic performance of the compressor.

Direct simulation of transition in an oscillatory boundary layer

1998 ◽  
Vol 371 ◽  
pp. 207-232 ◽  
Author(s):  
G. VITTORI ◽  
R. VERZICCO
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Turbulent Regime ◽  
Two Dimensional ◽  
Temporal Development ◽  
Direct Simulation ◽  
Navier Stokes Equations ◽  
Oscillatory Boundary Layer

Numerical simulations of Navier–Stokes equations are performed to study the flow originated by an oscillating pressure gradient close to a wall characterized by small imperfections. The scenario of transition from the laminar to the turbulent regime is investigated and the results are interpreted in the light of existing analytical theories. The ‘disturbed-laminar’ and the ‘intermittently turbulent’ regimes detected experimentally are reproduced by the present simulations. Moreover it is found that imperfections of the wall are of fundamental importance in causing the growth of two-dimensional disturbances which in turn trigger turbulence in the Stokes boundary layer. Finally, in the intermittently turbulent regime, a description is given of the temporal development of turbulence characteristics.

Self-Excited Oscillation of Transonic Flow Around an Airfoil in Two-Dimensional Channel

1989 ◽  
Author(s):  
Kazuomi Yamamoto ◽  
Yoshimichi Tanida
Keyword(s):  
Boundary Layer ◽  
Shock Wave ◽  
Transonic Flow ◽  
Stokes Equations ◽  
Flow Region ◽  
Boundary Layer Separation ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Layer Separation ◽  
Excited Oscillation

A self-excited oscillation of transonic flow in a simplified cascade model was investigated experimentally, theoretically and numerically. The measurements of the shock wave and wake motions, and unsteady static pressure field predict a closed loop mechanism, in which the pressure disturbance, that is generated by the oscillation of boundary layer separation, propagates upstream in the main flow and forces the shock wave to oscillate, and then the shock oscillation disturbs the boundary layer separation again. A one-dimensional analysis confirms that the self-excited oscillation occurs in the proposed mechanism. Finally, a numerical simulation of the Navier-Stokes equations reveals the unsteady flow structure of the reversed flow region around the trailing edge, which induces the large flow separation to bring about the anti-phase oscillation.

Free-stream coherent structures in parallel boundary-layer flows

2014 ◽  
Vol 752 ◽  
pp. 602-625 ◽  
Author(s):  
Kengo Deguchi ◽  
Philip Hall
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Coherent Structures ◽  
Free Stream ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Homotopy Continuation ◽  
Boundary Layer Flows ◽  
Navier Stokes Equations ◽  
High Reynolds

AbstractOur concern in this paper is with high-Reynolds-number nonlinear equilibrium solutions of the Navier–Stokes equations for boundary-layer flows. Here we consider the asymptotic suction boundary layer (ASBL) which we take as a prototype parallel boundary layer. Solutions of the equations of motion are obtained using a homotopy continuation from two known types of solutions for plane Couette flow. At high Reynolds numbers, it is shown that the first type of solution takes the form of a vortex–wave interaction (VWI) state, see Hall & Smith (J. Fluid Mech., vol. 227, 1991, pp. 641–666), and is located in the main part of the boundary layer. On the other hand, here the second type is found to support an equilibrium solution of the unit-Reynolds-number Navier–Stokes equations in a layer located a distance of $\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}O(\ln \mathit{Re})$ from the wall. Here $\mathit{Re}$ is the Reynolds number based on the free-stream speed and the unperturbed boundary-layer thickness. The streaky field produced by the interaction grows exponentially below the layer and takes its maximum size within the unperturbed boundary layer. The results suggest the possibility of two distinct types of streaky coherent structures existing, possibly simultaneously, in disturbed boundary layers.

Natural convection flow far from a horizontal plate

1999 ◽  
Vol 387 ◽  
pp. 227-254 ◽  
Author(s):  
VALOD NOSHADI ◽  
WILHELM SCHNEIDER
Keyword(s):  
Boundary Layer ◽  
Prandtl Number ◽  
Stokes Equations ◽  
Axisymmetric Flow ◽  
The Self ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Boundary Layer Equations ◽  
Self Similar ◽  
Similar Solutions

Plane and axisymmetric (radial), horizontal laminar jet flows, produced by natural convection on a horizontal finite plate acting as a heat dipole, are considered at large distances from the plate. It is shown that physically acceptable self-similar solutions of the boundary-layer equations, which include buoyancy effects, exist in certain Prandtl-number regimes, i.e. 0.5<Pr[les ]1.470588 for plane, and Pr>1 for axisymmetric flow. In the plane flow case, the eigenvalues of the self-similar solutions are independent of the Prandtl number and can be determined from a momentum balance, whereas in the axisymmetric case the eigenvalues depend on the Prandtl number and are to be determined as part of the solution of the eigenvalue problem. For Prandtl numbers equal to, or smaller than, the lower limiting values of 0.5 and 1 for plane and axisymmetric flow, respectively, the far flow field is a non-buoyant jet, for which self-similar solutions of the boundary-layer equations are also provided. Furthermore it is shown that self-similar solutions of the full Navier–Stokes equations for axisymmetric flow, with the velocity varying as 1/r, exist for arbitrary values of the Prandtl number.Comparisons with finite-element solutions of the full Navier–Stokes equations show that the self-similar boundary-layer solutions are asymptotically approached as the plate Grashof number tends to infinity, whereas the self-similar solution to the full Navier–Stokes equations is applicable, for a given value of the Prandtl number, only to one particular, finite value of the Grashof number.In the Appendices second-order boundary-layer solutions are given, and uniformly valid composite expansions are constructed; asymptotic expansions for large values of the lateral coordinate are performed to study the decay of the self-similar boundary-layer flows; and the stability of the jets is investigated using transient numerical solutions of the Navier–Stokes equations.

A Conceptual Model of Flapping-Wing Mechanism Inspired from the Results of Numerical Study

2013 ◽  
Vol 397-400 ◽  
pp. 783-788
Author(s):  
Xing Wei Zhang ◽  
Chao Wang ◽  
Hang Liu
Keyword(s):  
Conceptual Model ◽  
Power Efficiency ◽  
Stokes Equations ◽  
Numerical Study ◽  
Flapping Wing ◽  
Numerical Results ◽  
Navier Stokes ◽  
Active Deformation ◽  
Navier Stokes Equations ◽  
Wing Model

This paper investigates the aerodynamic forces of several plunging wing models by means of computational fluid dynamics. A finite volume method was used to solve the two-dimensional unsteady incompressible Navier-Stokes equations. The forces and power efficiency have been calculated and compared between sets of different models. Current work found that the nonsymmetrical moving can enhance the lift and thrust forces. The numerical results also prove that the flexible wing model can be use to improve the efficiency and reduce the input. Additionally, a new conceptual model for flapping wing mechanism with active deformation and adaptive nonsymmetrical driving motion is proposed base on the numerical results.

scholarly journals Determining the Tangential Velocity profile of a Rotating Fluid in a Static Container using Navier–Stokes equations

2020 ◽  
Author(s):  
RAJDEEP TAH ◽  
SARBAJIT MAZUMDAR ◽  
Krishna Kant Parida
Keyword(s):  
Angular Velocity ◽  
Velocity Profile ◽  
Velocity Gradient ◽  
Stokes Equations ◽  
Tangential Velocity ◽  
Navier Stokes ◽  
Rotating Fluid ◽  
Navier Stokes Equations ◽  
Similar Principle ◽  
Tangential Velocity Profile

The shape of the liquid surface for a fluid present in a uniformly rotating cylinder is generally determined by making a Tangential velocity gradient along the radius of the rotating cylindrical container. A very similar principle can be applied if the direction of the produced velocity gradient is reversed, for which the source of rotation will be present at the central axis of the cylindrical vessel in which the liquid is present. Now if the described system is completely closed, the angular velocity will decrease as a function of time. But when the surface of the rotating fluid is kept free, then the Tangential velocity profile would be similar to that of the Taylor-Couette Flow, with a modification that; due to formation of a curvature at the surface, the Navier-Stokes law is to be modified. Now the final equation may not seem to have a proper general solution, but can be approximated to certain solvable expressions for specific cases of angular velocity.

Sign in / Sign up

Export Citation Format

Share Document