On the stability of an inviscid shear layer which is periodic in space and time

1967 ◽  
Vol 27 (4) ◽  
pp. 657-689 ◽  
Author(s):  
R. E. Kelly
Keyword(s):  
Growth Rate ◽  
Shear Layer ◽  
Finite Amplitude ◽  
Periodic Component ◽  
Periodic Flow ◽  
Flow Profile ◽  
Mean Flow ◽  
Mean Velocity ◽  
The Mean ◽  
The Stability

In experiments concerning the instability of free shear layers, oscillations have been observed in the downstream flow which have a frequency exactly half that of the dominant oscillation closer to the origin of the layer. The present analysis indicates that the phenomenon is due to a secondary instability associated with the nearly periodic flow which arises from the finite-amplitude growth of the fundamental disturbance.At first, however, the stability of inviscid shear flows, consisting of a non-zero mean component, together with a component periodic in the direction of flow and with time, is investigated fairly generally. It is found that the periodic component can serve as a means by which waves with twice the wavelength of the periodic component can be reinforced. The dependence of the growth rate of the subharmonic wave upon the amplitude of the periodic component is found for the case when the mean flow profile is of the hyperbolic-tangent type. In order that the subharmonic growth rate may exceed that of the most unstable disturbance associated with the mean flow, the amplitude of the streamwise component of the periodic flow is required to be about 12 % of the mean velocity difference across the shear layer. This represents order-of-magnitude agreement with experiment.Other possibilities of interaction between disturbances and the periodic flow are discussed, and the concluding section contains a discussion of the interactions on the basis of the energy equation.

The structure of a highly decelerated axisymmetric turbulent boundary layer

2021 ◽  
Vol 929 ◽  
Author(s):  
N. Agastya Balantrapu ◽  
Christopher Hickling ◽  
W. Nathan Alexander ◽  
William Devenport
Keyword(s):  
Boundary Layer ◽  
Pressure Gradient ◽  
Shear Layer ◽  
Layer Thickness ◽  
Boundary Layer Thickness ◽  
Large Scale ◽  
Convection Velocity ◽  
Mean Flow ◽  
Mean Velocity ◽  
The Mean

Experiments were performed over a body of revolution at a length-based Reynolds number of 1.9 million. While the lateral curvature parameters are moderate ( $\delta /r_s < 2, r_s^+>500$ , where $\delta$ is the boundary layer thickness and r s is the radius of curvature), the pressure gradient is increasingly adverse ( $\beta _{C} \in [5 \text {--} 18]$ where $\beta_{C}$ is Clauser’s pressure gradient parameter), representative of vehicle-relevant conditions. The mean flow in the outer regions of this fully attached boundary layer displays some properties of a free-shear layer, with the mean-velocity and turbulence intensity profiles attaining self-similarity with the ‘embedded shear layer’ scaling (Schatzman & Thomas, J. Fluid Mech., vol. 815, 2017, pp. 592–642). Spectral analysis of the streamwise turbulence revealed that, as the mean flow decelerates, the large-scale motions energize across the boundary layer, growing proportionally with the boundary layer thickness. When scaled with the shear layer parameters, the distribution of the energy in the low-frequency region is approximately self-similar, emphasizing the role of the embedded shear layer in the large-scale motions. The correlation structure of the boundary layer is discussed at length to supply information towards the development of turbulence and aeroacoustic models. One major finding is that the estimation of integral turbulence length scales from single-point measurements, via Taylor's hypothesis, requires significant corrections to the convection velocity in the inner 50 % of the boundary layer. The apparent convection velocity (estimated from the ratio of integral length scale to the time scale), is approximately 40 % greater than the local mean velocity, suggesting the turbulence is convected much faster than previously thought. Closer to the wall even higher corrections are required.

Effect of an Azimuthal Mean Flow On the Structure and Stability of Thermoacoustic Modes in an Annular Combustor Model with Electroacoustic Feedback

2020 ◽  
Author(s):  
Sylvain C. Humbert ◽  
Jonas Moeck ◽  
Alessandro Orchini ◽  
Christian Oliver Paschereit
Keyword(s):  
Mach Number ◽  
Initial Conditions ◽  
Mean Flow ◽  
Final State ◽  
Mean Velocity ◽  
Acoustic Damping ◽  
Annular Combustor ◽  
The Mean ◽  
High Mach ◽  
The Stability

Abstract Thermoacoustic oscillations in axisymmetric annular combustors are generally coupled by degenerate azimuthal modes, which can be of standing or spinning nature. Symmetry breaking due to the presence of a mean azimuthal flow splits the degenerate thermoacoustic eigenvalues, resulting in pairs of counter-spinning modes with close but distinct frequencies and growth rates. In this study, experiments have been performed using an annular system where the thermoacoustic feedback due to the flames is mimicked by twelve identical electroacoustic feedback loops. The mean azimuthal flow is generated by fans. We investigate the standing/spinning nature of the oscillations as a function of the Mach number for two types of initial states, and how the stability of the system is affected by the mean azimuthal flow. It is found that spinning, standing or mixed modes can be encountered at very low Mach number, but increasing the mean velocity promotes one spinning direction. At sufficiently high Mach number, spinning modes are observed in the limit cycle oscillations. In some cases, the initial conditions have a significant impact on the final state of the system. It is found that the presence of a mean azimuthal flow increases the acoustic damping. This has a beneficial effect on stability: it often reduces the amplitude of the self-sustained oscillations, and can even suppress them in some cases. However, we observe that the suppression of a mode due to the mean flow may destabilize another one. We discuss our findings in relation with an existing low-order model.

scholarly journals Finite disturbance effect on the stability of a laminar incompressible wake behind a flat plate

1970 ◽  
Vol 40 (2) ◽  
pp. 315-341 ◽  
Author(s):  
D. Ru-Sue Ko ◽  
T. Kubota ◽  
L. Lees
Keyword(s):  
Flat Plate ◽  
Finite Amplitude ◽  
Single Frequency ◽  
Shape Parameters ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Flow Parameters ◽  
Local Mean ◽  
The Mean ◽  
The Stability

An integral method is used to investigate the interaction between a two-dimensional, single frequency finite amplitude disturbance in a laminar, incompressible wake behind a flat plate at zero incidence. The mean flow is assumed to be a non-parallel flow characterized by a few shape parameters. Distribution of the fluctuation across the wake is obtained as functions of those mean flow parameters by solving the inviscid Rayleigh equation using the local mean flow. The variations of the fluctuation amplitude and of the shape parameters for the mean flow are then obtained by solving a set of ordinary differential equations derived from the momentum and energy integral equations. The interaction between the mean flow and the fluctuation through Reynolds stresses plays an important role in the present formulation, and the theoretical results show good agreement with the measurements of Sato & Kuriki (1961).

scholarly journals An exact theory of nonlinear waves on a Lagrangian-mean flow

1978 ◽  
Vol 89 (4) ◽  
pp. 609-646 ◽  
Author(s):  
D. G. Andrews ◽  
M. E. Mcintyre
Keyword(s):  
Water Waves ◽  
Finite Amplitude ◽  
Mean Flow ◽  
Radiation Stress ◽  
Initial State ◽  
Mean Velocity ◽  
Generalized Lagrangian ◽  
Flow Evolution ◽  
The Mean ◽  
The Waves

An exact and very general Lagrangian-mean description of the back effect of oscillatory disturbances upon the mean state is given. The basic formalism applies to any problem whose governing equations are given in the usual Eulerian form, and irrespective of whether spatial, temporal, ensemble, or ‘two-timing’ averages are appropriate. The generalized Lagrangian-mean velocity cannot be defined exactly as the ‘mean following a single fluid particle’, but in cases where spatial averages are taken can easily be visualized, for instance, as the motion of the centre of mass of a tube of fluid particles which lay along the direction of averaging in a hypothetical initial state of no disturbance.The equations for the Lagrangian-mean flow are more useful than their Eulerian-mean counterparts in significant respects, for instance in explicitly representing the effect upon mean-flow evolution of wave dissipation or forcing. Applications to irrotational acoustic or water waves, and to astrogeophysical problems of waves on axisymmetric mean flows are discussed. In the latter context the equations embody generalizations of the Eliassen-Palm and Charney-Drazin theorems showing the effects on the mean flow of departures from steady, conservative waves, for arbitrary, finite-amplitude disturbances to a stratified, rotating fluid, with allowance for self-gravitation as well as for an external gravitational field.The equations show generally how the pseudomomentum (or wave ‘momentum’) enters problems of mean-flow evolution. They also indicate the extent to which the net effect of the waves on the mean flow can be described by a ‘radiation stress’, and provide a general framework for explaining the asymmetry of radiation-stress tensors along the lines proposed by Jones (1973).

PIV Study of Separated and Reattached Open Channel Flow Over Surface Mounted Blocks

2008 ◽  
Vol 130 (6) ◽  
Author(s):  
Martin Agelinchaab ◽  
Mark F. Tachie
Keyword(s):  
Boundary Layer ◽  
Shear Layer ◽  
Channel Flow ◽  
Open Channel ◽  
Open Channel Flow ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Mean Velocity ◽  
High Background ◽  
The Mean

A particle image velocimetry is used to study the mean and turbulent fields of separated and redeveloping flow over square, rectangular, and semicircular blocks fixed to the bottom wall of an open channel. The open channel flow is characterized by high background turbulence level, and the ratio of the upstream boundary layer thickness to block height is considerably higher than in prior experiments. The variation of the Reynolds stresses along the dividing streamlines is discussed within the context of vortex stretching, longitudinal strain rate, and wall damping. It appears that wall damping is a more dominant mechanism in the vicinity of reattachment. In the recirculation and reattachment regions, profiles of the mean velocity, turbulent quantities, and transport terms are used to document the salient features of block geometry on the flow. The flow characteristics in these regions strongly depend on block geometry. Downstream of reattachment, a new shear layer is formed, and the redevelopment of the shear layer toward the upstream open channel boundary layer is studied using the boundary layer parameters and Reynolds stresses. The results show that the mean flow rapidly redeveloped so that the Clauser parameter recovered to its upstream value at 90 step heights downstream of reattachment. However, the rate of development close to reattachment strongly depends on block geometry.

The effects of turbulence on the mean flow past square rods

1983 ◽  
Vol 137 ◽  
pp. 331-345 ◽  
Author(s):  
Y. Nakamura ◽  
Y. Ohya
Keyword(s):  
Growth Rate ◽  
Shear Layer ◽  
Cross Section ◽  
Large Scale ◽  
Small Scale ◽  
Mean Flow ◽  
Flow Past ◽  
The Mean ◽  
Scale Turbulence ◽  
Main Effects

There are two main effects of turbulence on the mean flow past rods of square cross-section aligned with the approaching flow. Small-scale turbulence increases the growth rate of the shear layer, while large-scale turbulence enhances the roll-up of the shear layer. The consequences of these depend on the length of a square rod. The mean base pressure of a square rod varies considerably with turbulence intensity and scale as well as with its length.

Assessment of Predictive Capabilities of Detached Eddy Simulation to Simulate Flow and Mass Transport Past Open Cavities

2007 ◽  
Vol 129 (11) ◽  
pp. 1372-1383 ◽  
Author(s):  
Kyoungsik Chang ◽  
George Constantinescu ◽  
Seung-O Park
Keyword(s):  
Reynolds Number ◽  
Shear Layer ◽  
Transport Model ◽  
Detached Eddy Simulation ◽  
Reynolds Stresses ◽  
Mean Flow ◽  
Mean Velocity ◽  
Eddy Simulation ◽  
Fine Mesh ◽  
The Mean

The three-dimensional (3D) incompressible flow past an open cavity in a channel is predicted using the Spalart–Almaras (SA) and the shear-stress-transport model (SST) based versions of detached eddy simulation (DES). The flow upstream of the cavity is fully turbulent. In the baseline case the length to depth (L∕D) ratio of the cavity is 2 and the Reynolds number ReD=3360. Unsteady RANS (URANS) is performed to better estimate the performance of DES using the same code and meshes employed in DES. The capabilities of DES and URANS to predict the mean flow, velocity spectra, Reynolds stresses, and the temporal decay of the mass of a passive contaminant introduced instantaneously inside the cavity are assessed based on comparisons with results from a well resolved large eddy simulation (LES) simulation of the same flow conducted on a very fine mesh and with experimental data. It is found that the SA-DES simulation with turbulent fluctuations at the inlet gives the best overall predictions for the flow statistics and mass exchange coefficient characterizing the decay of scalar mass inside the cavity. The presence of inflow fluctuations in DES is found to break the large coherence of the vortices shed in the separated shear layer that are present in the simulations with steady inflow conditions and to generate a wider range of 3D eddies inside the cavity, similar to LES. The predictions of the mean velocity field from URANS and DES are similar. However, URANS predictions show poorer agreement with LES and experiment compared to DES for the turbulence quantities. Additionally, simulations with a higher Reynolds number (ReD=33,600) and with a larger length to depth ratio (L∕D=4) are conducted to study the changes in the flow and shear-layer characteristics, and their influence on the ejection of the passive contaminant from the cavity.

scholarly journals Effects of Mean Flow Profiles on the Instability of a Low-Density Gas Jet Injected Into a High-Density Gas

Volume 1 ◽  
2004 ◽  
Author(s):  
Nanda Kishore Vedantam ◽  
Ramkumar N. Parthasarathy
Keyword(s):  
Shear Layer ◽  
Froude Number ◽  
Density Ratio ◽  
Critical Density ◽  
Velocity Profiles ◽  
High Density ◽  
Low Density ◽  
Mean Flow ◽  
Mean Velocity ◽  
The Mean

The effects of the mean velocity profiles on the instability characteristics in the near-injector region of axisymmetric low-density gas jets injected vertically upwards into a high-density gas medium were investigated using linear inviscid stability analysis. The flow was assumed to be isothermal and locally parallel. Three velocity profiles, signifying different changes in the mean velocity in the shear layer, were used in the analysis. The effects of the inhomogeneous shear layer and the Froude number (signifying the effects of gravity) on the instability for each set of mean profiles were delineated. At a large Froude number (negligible gravity), a critical density ratio was found for the three profiles at which the jet became absolutely unstable. The critical density ratio for each velocity profile was increased as the Froude number was reduced. A critical Froude number was found for the three sets of profiles, below which the jet was absolutely unstable for all the density ratios less than unity, which demarcated the jet flow into the momentum-driven regime and the buoyancy-driven regime.

The formation of shear and density layers in stably stratified turbulent flows: linear processes

2002 ◽  
Vol 455 ◽  
pp. 243-262 ◽  
Author(s):  
M. GALMICHE ◽  
J. C. R. HUNT
Keyword(s):  
Turbulent Flows ◽  
Large Scale ◽  
Shear Stresses ◽  
Flow Profile ◽  
Mean Flow ◽  
Mean Velocity ◽  
Linear Processes ◽  
Buoyancy Forces ◽  
Uniform Background ◽  
The Mean

The initial evolution of the momentum and buoyancy fluxes in a freely decaying, stably stratified homogeneous turbulent flow with r.m.s. velocity u′0 and integral lengthscale l0 is calculated using a weakly inhomogeneous and unsteady form of the rapid distortion theory (RDT) in order to study the growth of small temporal and spatial perturbations in the large-scale mean stratification N(z, t) and mean velocity profile ū(z, t) (here N is the local Brunt–Väisälä frequency and ū is the local velocity of the horizontal mean flow) when the ratio of buoyancy forces to inertial forces is large, i.e. Nl0/u′0[Gt ]1. The lengthscale L of the perturbations in the mean profiles of stratification and shear is assumed to be large compared to l0 and the presence of a uniform background mean shear can be taken into account in the model provided that the inertial shear forces are still weaker than the buoyancy forces, i.e. when the Richardson number Ri = (N/∂zū)2[Gt ]1 at each height.When a mean shear perturbation is introduced initially with no uniform background mean shear and uniform stratification, the analysis shows that the perturbations in the mean flow profile grow on a timescale of order N-1. When the mean density profile is perturbed initially in the absence of a background mean shear, layers with significant density gradient fluctuations grow on a timescale of order N−10 (where N0 is the order of magnitude of the initial Brunt–Väisälä frequency) without any associated mean velocity gradients in the layers. These results are in good agreement with the direct numerical simulations performed by Galmiche et al. (2002) and are consistent with the earlier physically based conjectures made by Phillips (1972) and Posmentier (1977). The model also shows that when there is a background mean shear in combination with perturbations in the mean stratification, negative shear stresses develop which cause the mean velocity gradient to grow in the density layers. The linear analysis for short times indicates that the scale on which the mean perturbations grow fastest is of order u′0/N0, which is consistent with the experiments of Park et al. (1994).We conclude that linear mechanisms are widely involved in the formation of shear and density layers in stratified flows as is observed in some laboratory experiments and geophysical flows, but note that the layers are also significantly influenced by nonlinear and dissipative processes at large times.

Effect of an Azimuthal Mean Flow on the Structure and Stability of Thermoacoustic Modes in an Annular Combustor Model With Electroacoustic Feedback

2020 ◽  
Author(s):  
Sylvain C. Humbert ◽  
Jonas P. Moeck ◽  
Alessandro Orchini ◽  
Christian Oliver Paschereit
Keyword(s):  
Mach Number ◽  
Initial Conditions ◽  
Mean Flow ◽  
Final State ◽  
Mean Velocity ◽  
Acoustic Damping ◽  
Annular Combustor ◽  
The Mean ◽  
High Mach ◽  
The Stability

Abstract Thermoacoustic oscillations in axisymmetric annular combustors are generally coupled by degenerate azimuthal modes, which can be of standing or spinning nature. Symmetry breaking due to the presence of a mean azimuthal flow splits the degenerate thermoacoustic eigenvalues, resulting in pairs of counter-spinning modes with close but distinct frequencies and growth rates. In the present study, experiments have been performed using an annular system where the thermoacoustic feedback due to the flames is mimicked by twelve identical electroacoustic feedback loops. The mean azimuthal flow is generated by fans. We investigate the standing/spinning nature of the oscillations as a function of the azimuthal Mach number for two types of initial states, and how the stability of the system is affected by the mean azimuthal flow. It is found that spinning, standing or mixed modes can be encountered at very low Mach number, but increasing the mean velocity promotes one spinning direction. At sufficiently high Mach number, only spinning modes are observed in the limit cycle oscillations. In some cases, the initial conditions have a significant impact on the final state of the system. It is found that the presence of a mean azimuthal flow increases the acoustic damping. This has a beneficial effect on stability: it often reduces the amplitude of the self-sustained oscillations, and can even suppress them in some cases. However, we observe that the suppression of a mode due to the mean flow may destabilize another one. We discuss our findings in relation with an existing low-order model.

Sign in / Sign up

Export Citation Format

Share Document