Modification of electrostatic fluctuations by externally imposed radial electric fields

2000 ◽  
Vol 64 (3) ◽  
pp. 227-233
Author(s):  
C. RICCARDI ◽  
C. BEVILACQUA ◽  
G. CHIODINI ◽  
E. SINDONI ◽  
M. FONTANESI
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Radial Electric Field ◽  
Plasma Parameters ◽  
Electrostatic Fluctuations

This paper concerns experiments on the turbulence of a toroidal magnetoplasma in the presence of a radial electric field. The possibility of reduction of turbulence through the application of an external biasing potential has been evaluated by measuring the electrostatic fluctuations and main plasma parameters.

Derivation of radial electric fields using kinetic theory in tokamak

2013 ◽  
Vol 79 (5) ◽  
pp. 513-517
Author(s):  
K. NOORI ◽  
P. KHORSHID ◽  
M. AFSARI
Keyword(s):  
Kinetic Theory ◽  
Electric Field ◽  
Electric Fields ◽  
Driving Forces ◽  
Radial Electric Field ◽  
Radial Pressure ◽  
Momentum Balance ◽  
Balance Equations ◽  
Radial Pressure Gradient ◽  
Poloidal Rotation

AbstractIn the current study, radial electric field with fluid equations has been calculated. The calculation started with kinetic theory, Boltzmann and momentum balance equations were derived, the negligible terms compared with others were eliminated, and the radial electric field expression in steady state was derived. As mentioned in previous researches, this expression includes all types of particles such as electrons, ions, and neutrals. The consequence of this solution reveals that three major driving forces contribute in radial electric field: radial pressure gradient, poloidal rotation, and toroidal rotation; rotational terms mean Lorentz force. Therefore, radial electric field and plasma rotation are connected through the radial momentum balance.

Extension–torsion–inflation coupling in compressible electroelastomeric thin tubes

2019 ◽  
Vol 25 (3) ◽  
pp. 644-663 ◽  
Author(s):  
Shashank Saxena ◽  
Darius Diogo Barreto ◽  
Ajeet Kumar
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Variational Formulation ◽  
Radial Direction ◽  
Radial Electric Field ◽  
Algebraic Equations ◽  
Deformation Problem ◽  
Thin Tube ◽  
Poling Direction ◽  
Helical Anisotropy

We present an axisymmetric and axially homogeneous variational formulation to obtain coupled extension–torsion–inflation deformation in compressible electroelastomeric tubes in the presence of axial and radial electric fields. We show that such deformations occur under the following two conditions: (1) only the axial electric field is imposed, with the electric poling direction in the tube (if present) lying in the radial plane; and (2) only the radial electric field is imposed within the tube, with the electric poling direction (if present) also along the radial direction. The poling direction in condition (1) generates helical anisotropy in the tube. We then obtain the governing differential equations necessary to solve the above deformation problem for thick tubes. We further apply the thin tube limit to obtain simplified algebraic equations to solve the same deformation problem. The effect of applied electric field parameters on the extension–inflation coupling and induced internal pressure vs. imposed inflation behavior is finally presented through numerical solution of the above obtained algebraic equations. The study will be useful in designing soft electroelastic tubular actuators.

Drift Instability in the Presence of Nonuniform Radial Electric Fields

1971 ◽  
Vol 49 (12) ◽  
pp. 1630-1640 ◽  
Author(s):  
C. E. Capjack ◽  
T. E. Stringer
Keyword(s):  
Kinetic Equation ◽  
Electric Field ◽  
Electric Fields ◽  
Numerical Solutions ◽  
Radial Electric Field ◽  
Drift Instability

An equation describing the drift instability in a collisionless low-β plasma, in the presence of a nonuniform radial electric field is derived from guiding center equations for the ions and the drift kinetic equation for the electrons. Numerical solutions to this equation indicate that the influence of a nonuniform radial electric field on the drift instability may be determined from the manner in which this field modifies the macroscopic electron rotation profile.

scholarly journals Analysis of the interaction of an electron with radial electric fields in the presence of a disclination

2019 ◽  
Vol 16 (11) ◽  
pp. 1950172
Author(s):  
Knut Bakke ◽  
Claudio Furtado
Keyword(s):  
Electric Field ◽  
Elastic Medium ◽  
Electric Fields ◽  
Bound States ◽  
Topological Defect ◽  
Radial Electric Field ◽  
Centrifugal Term ◽  
Radial Equation ◽  
Linear Distribution ◽  
Electric Charge Distribution

We consider an elastic medium with a disclination and investigate the topological effects on the interaction of a spinless electron with radial electric fields through the WKB (Wentzel, Kramers, Brillouin) approximation. We show how the centrifugal term of the radial equation must be modified due to the influence of the topological defect in order that the WKB approximation can be valid. Then, we search for bound states solutions from the interaction of a spinless electron with the electric field produced by this linear distribution of electric charges. In addition, we search for bound states solutions from the interaction of a spinless electron with radial electric field produced by uniform electric charge distribution inside a long non-conductor cylinder.

scholarly journals Nonlinear electroelasticity: material properties, continuum theory and applications

2017 ◽  
Vol 473 (2204) ◽  
pp. 20170311 ◽  
Author(s):  
Luis Dorfmann ◽  
Ray W. Ogden
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Material Characterization ◽  
Cylindrical Tube ◽  
Continuum Theory ◽  
Radial Electric Field ◽  
Short Account ◽  
Elastomeric Materials ◽  
History Of ◽  
Circular Cylindrical Tube

In the last few years, it has been recognized that the large deformation capacity of elastomeric materials that are sensitive to electric fields can be harnessed for use in transducer devices such as actuators and sensors. This has led to the reassessment of the mathematical theory that is needed for the description of the electromechanical (in particular, electroelastic) interactions for purposes of material characterization and prediction. After a review of the key experiments concerned with determining the nature of the electromechanical interactions and a discussion of the range of applications to devices, we provide a short account of the history of developments in the nonlinear theory. This is followed by a succinct modern treatment of electroelastic theory, including the governing equations and constitutive laws needed for both material characterization and the analysis of general electroelastic coupling problems. For illustration, the theory is then applied to two simple representative boundary-value problems that are relevant to the geometries of activation devices; in particular, (a) a rectangular plate and (b) a circular cylindrical tube, in each case with compliant electrodes on the major surfaces and a potential difference between them. In (a), an electric field is generated normal to the major surfaces and in (b), a radial electric field is present. This is followed by a short section in which other problems addressed on the basis of the general theory are described briefly.

Dynamics of a viscous thread surrounded by another viscous fluid in a cylindrical tube under the action of a radial electric field: breakup and touchdown singularities

2011 ◽  
Vol 683 ◽  
pp. 27-56 ◽  
Author(s):  
Q. Wang ◽  
D. T. Papageorgiou
Keyword(s):  
Viscous Fluid ◽  
Electric Field ◽  
Electric Fields ◽  
Viscosity Ratio ◽  
Cylindrical Tube ◽  
Radial Electric Field ◽  
Boundary Element Methods ◽  
Annular Region ◽  
Two Fluids ◽  
Jet Breakup

AbstractThe nonlinear dynamics of a viscous filament surrounded by a second viscous fluid arranged in a core-annular configuration when a radial electric field acts in the annular region, are studied analytically and computationally using boundary element methods. The flow is characterized by the viscosity ratio, an electric Weber number measuring the strength of the electric field, a geometrical parameter measuring the thickness of the undisturbed annular region, as well as a computational parameter that fixes the wavenumber of the undulations. Axisymmetric solutions are computed by direct numerical simulations in the Stokes limit for general values of the parameters when the two fluids have equal viscosities, and an asymptotic theory is carried out to produce a novel evolution equation for thin film dynamics valid when the undisturbed annular thickness is small and the viscosity ratio is of order one. It is established (in agreement with previous computations in the absence of electric fields) that a sufficiently thick annulus enables thread breakup while a sufficiently thin one (approximately one fifth of the undisturbed thread radius for the case of equal viscosities, for instance) suppresses pinching and drives the interface to approach the tube wall asymptotically without actually touching it. The present simulations show that the electric field affects the dynamics drastically in several ways. First, it promotes interfacial wall touchdown in finite time and a comparison between direct simulations and the asymptotic solutions are in fair agreement. Second, the electric field acts to suppress pinching in the sense that solutions that lead to jet breakup due to a thick enough viscous annulus are driven to wall touchdown. When pinching takes place we find that the ultimate pinching solutions are self-similar and recover the non-electrified ones to leading order for the range of parameters studied.

scholarly journals The Electric Field Detector on Board the China Seismo Electromagnetic Satellite—In-Orbit Results and Validation

Instruments ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 1
Author(s):  
Piero Diego ◽  
Jianping Huang ◽  
Mirko Piersanti ◽  
Davide Badoni ◽  
Zhima Zeren ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Geomagnetic Field ◽  
Low Frequency ◽  
Local Magnetic Field ◽  
Plasma Parameters ◽  
Actual Space ◽  
Quantitative Validation ◽  
Average Condition ◽  
Electromagnetic Signals

The aim of this work is to validate the China Seismo-Electromagnetic Satellite 01 (CSES-01) Electric Field Detector (EFD) measurements through the analysis of the instrument response to various inputs: (a) geomagnetic field variations, (b) plasma density depletions, and (c) electromagnetic signals from natural and artificial sources such as Schumann resonance and VLF (Very Low Frequency) antennas. The knowledge of the geomagnetic induced electric field vs×B (where vs is the satellite speed and B and the local magnetic field), and the plasma variations effect, described by the Orbit Motion Limited (OML) theory, are key parameters to determine the expected theoretical values of the EFD sensors potentials data. Based on the CSES on-board measurements of plasma parameters and geomagnetic field, a direct quantitative validation is presented. In addition, the electromagnetic signals detection capability is checked but only qualitatively confirmed, since the ionospheric complexity does not allow an accurate theoretical computation of waves modulation. The quantitative comparison highlights the very good agreement between observed and theoretical potentials values during average condition. Conversely, in case of strong electric fields, the OML theory shows partial inability in reproducing the actual space plasma conditions resulting in a reduced theoretical values reliability. Finally, both natural and artificial electromagnetic signals are satisfactorily identified showing a reliable sensitivity in different frequency bands.

Tuning the Electric Field Response of MOFs by Rotatable Dipolar Linkers

2019 ◽  
Author(s):  
Johannes P. Dürholt ◽  
Babak Farhadi Jahromi ◽  
Rochus Schmid
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Structural Changes ◽  
Dielectric Behavior ◽  
Two Dimensions ◽  
Dielectric Constants ◽  
Electric Response ◽  
Dipole Strength ◽  
Metal Organic ◽  
Dynamics Simulations

Recently the possibility of using electric fields as a further stimulus to trigger structural changes in metal-organic frameworks (MOFs) has been investigated. In general, rotatable groups or other types of mechanical motion can be driven by electric fields. In this study we demonstrate how the electric response of MOFs can be tuned by adding rotatable dipolar linkers, generating a material that exhibits paralectric behavior in two dimensions and dielectric behavior in one dimension. The suitability of four different methods to compute the relative permittivity κ by means of molecular dynamics simulations was validated. The dependency of the permittivity on temperature T and dipole strength μ was determined. It was found that the herein investigated systems exhibit a high degree of tunability and substantially larger dielectric constants as expected for MOFs in general. The temperature dependency of κ obeys the Curie-Weiss law. In addition, the influence of dipolar linkers on the electric field induced breathing behavior was investigated. With increasing dipole moment, lower field strength are required to trigger the contraction. These investigations set the stage for an application of such systems as dielectric sensors, order-disorder ferroelectrics or any scenario where movable dipolar fragments respond to external electric fields.

scholarly journals Investigation of turbulence rotation and radial electric field in the island divertor and plasma edge at W7-X

2019 ◽  
Vol 61 (5) ◽  
pp. 054003 ◽  
Author(s):  
A Krämer-Flecken ◽  
X Han ◽  
T Windisch ◽  
J Cosfeld ◽  
P Drews ◽  
...  
Keyword(s):  
Electric Field ◽  
Radial Electric Field ◽  
Plasma Edge

scholarly journals Meta-Deflectors Made of Dielectric Nanohole Arrays with Anti-Damage Potential

Photonics ◽  
2021 ◽  
Vol 8 (4) ◽  
pp. 107
Author(s):  
Haichao Yu ◽  
Feng Tang ◽  
Jingjun Wu ◽  
Zao Yi ◽  
Xin Ye ◽  
...  
Keyword(s):  
Electric Field ◽  
Electric Fields ◽  
Laser Cutting ◽  
High Complexity ◽  
Damage Potential ◽  
Optical Components ◽  
Nanohole Arrays ◽  
Intense Light ◽  
Polarization Of Light ◽  
Air Hole

In intense-light systems, the traditional discrete optical components lead to high complexity and high cost. Metasurfaces, which have received increasing attention due to the ability to locally manipulate the amplitude, phase, and polarization of light, are promising for addressing this issue. In the study, a metasurface-based reflective deflector is investigated which is composed of silicon nanohole arrays that confine the strongest electric field in the air zone. Subsequently, the in-air electric field does not interact with the silicon material directly, attenuating the optothermal effect that causes laser damage. The highest reflectance of nanoholes can be above 99% while the strongest electric fields are tuned into the air zone. One presentative deflector is designed based on these nanoholes with in-air-hole field confinement and anti-damage potential. The 1st order of the meta-deflector has the highest reflectance of 55.74%, and the reflectance sum of all the orders of the meta-deflector is 92.38%. The optothermal simulations show that the meta-deflector can theoretically handle a maximum laser density of 0.24 W/µm2. The study provides an approach to improving the anti-damage property of the reflective phase-control metasurfaces for intense-light systems, which can be exploited in many applications, such as laser scalpels, laser cutting devices, etc.

Sign in / Sign up

Export Citation Format

Share Document