Electron Microscopic Observation of the Longitudinal Organization of Poly (p-Phenylene Terephthalamide) Fibers

1982 ◽  
Vol 40 ◽  
pp. 680-681
Author(s):  
Li Li-Sheng ◽  
L.F. Allard ◽  
W.C. Bigelow
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Microscopic Observation ◽  
Electron Microscopic Observation ◽  
Electron Microscopic ◽  
Aromatic Polyamides ◽  
Radial Arrangement ◽  
Scanning Electron ◽  
Better Than

The aromatic polyamides form a class of fibers having mechanical properties which are much better than those of aliphatic polyamides. Currently, the accepted morphology of these fibers as proposed by M.G. Dobb, et al. is a radial arrangement of pleated sheets, with the plane of the pleats parallel to the axis of the fiber. We have recently obtained evidence which supports a different morphology of this type of fiber, using ultramicrotomy and ion-thinning techniques to prepare specimens for transmission and scanning electron microscopy.

Comparative Study of Different Source of Silica-Filled Epoxy Resin

2013 ◽  
Vol 631-632 ◽  
pp. 205-208 ◽  
Author(s):  
Shan Sun ◽  
Xue Qing Liu ◽  
Ji Yan Liu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Impact Strength ◽  
Rice Husk ◽  
Specific Area ◽  
Fume Silica ◽  
Rice Husk Silica ◽  
Scanning Electron ◽  
Better Than

The mechanical properties and morphologies of fume precipitate and rice husk silica filled EP composites have been compared. The density, specific area of the silica decreases in the order of fume silica, precipitate silica and rice husk silica, while the silica size increases with the order above. It is shown that the fume silica/EP exhibits the highest flexural strength and modulus, followed by the precipitate silica/EP and the rice husk silica/EP. The rice husk silica/EP exhibits the highest in impact strength as silica is 1 phr. Over 5 phr of silica, fume silica/EP has the highest in impact strength, while the rice silica/EP is better than precipitate silica/EP. Scanning electron microscopy (SEM) results show that the fume silica has best dispersion and least filler agglomerates in matrix. The better dispersion will be responsible for the higher reinforcing and processing viscosity of the fume silica.

Problems in observation of natural biological surfaces with high-resolution scanning electron microscopy

1996 ◽  
Vol 54 ◽  
pp. 824-825
Author(s):  
René Hermann ◽  
Martin Müller
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
High Resolution ◽  
Physiological State ◽  
Surrounding Medium ◽  
Electron Microscopic Observation ◽  
Volatile Components ◽  
Electron Microscopic ◽  
Biological Surfaces ◽  
Scanning Electron

High resolution scanning electron microscopy can contribute a lot to the understanding of events occurring on biological surfaces even at a molecular level (either natural or artificially produced surfaces, e.g. by freeze-fracturing). In order to reach this goal, significant structural elements, down to dimensions of 2 - 4 nm have to be preserved as a function of the physiological state. Cryotechniques are important tools to fulfil this task.A natural biological surface is often not easily accessible to scanning electron microscopic observation. The surface is the part of the specimen where an exchange with the surroundings takes place. Removal or replacement of the surrounding medium can strongly influence the surface structure. Surrounding fluids normally contain non volatile components (only a few organsisms, e.g. yeasts, survive in distilled water without damage). Drying procedures - out of the native milieu - therefore result in deposition of solutes onto the specimen surface, sometimes mimiking natural biological structures.

A Scanning Electron Microscopic Study of the Uriniferous Tubules

1973 ◽  
Vol 31 ◽  
pp. 622-623
Author(s):  
Peter M. Andrews
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Renal Glomerulus ◽  
Electron Microscopic ◽  
Vascular Perfusion ◽  
Scanning Electron Microscopic Study ◽  
Scanning Electron Microscopic ◽  
Collecting Tubules ◽  
Bowman's Capsule ◽  
Scanning Electron

Although there have been a number of recent scanning electron microscopic reports on the renal glomerulus, the advantages of scanning electron microscopy have not yet been applied to a systematic study of the uriniferous tubules. In the present investigation, scanning electron microscopy was used to study the ultrastructural morphology of the proximal, distal, thin loop, and collecting tubules. Material for observation was taken from rat kidneys which were fixed by vascular perfusion, sectioned by either cutting or fracturing technigues, and critically point dried.The brush border characterising proximal tubules is first detected on the luminal surface of Bowman's capsule adjacent to the urinary pole orifice. In this region one frequently finds irregular microvilli characterized by broad and flattened bases with occasional bulbous structures protruding from their surfaces.

scholarly journals A Review on Enhancing the Antibacterial Activity of ZnO: Mechanisms and Microscopic Investigation

2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Buzuayehu Abebe ◽  
Enyew Amare Zereffa ◽  
Aschalew Tadesse ◽  
H. C. Ananda Murthy
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Antibacterial Activity ◽  
Field Emission ◽  
Volume Ratio ◽  
Electronic Configuration ◽  
Microscopic Investigation ◽  
Electron Microscopic ◽  
Active Materials ◽  
Scanning Electron

Abstract Metal oxide nanomaterials are one of the preferences as antibacterial active materials. Due to its distinctive electronic configuration and suitable properties, ZnO is one of the novel antibacterial active materials. Nowadays, researchers are making a serious effort to improve the antibacterial activities of ZnO by forming a composite with the same/different bandgap semiconductor materials and doping of ions. Applying capping agents such as polymers and plant extract that control the morphology and size of the nanomaterials and optimizing different conditions also enhance the antibacterial activity. Forming a nanocomposite and doping reduces the electron/hole recombination, increases the surface area to volume ratio, and also improves the stability towards dissolution and corrosion. The release of antimicrobial ions, electrostatic interaction, reactive oxygen species (ROS) generations are the crucial antibacterial activity mechanism. This review also presents a detailed discussion of the antibacterial activity improvement of ZnO by forming a composite, doping, and optimizing different conditions. The morphological analysis using scanning electron microscopy, field emission-scanning electron microscopy, field-emission transmission electron microscopy, fluorescence microscopy, and confocal microscopy can confirm the antibacterial activity and also supports for developing a satisfactory mechanism. Graphical abstract Graphical abstract showing the metal oxides antibacterial mechanism and the fluorescence and scanning electron microscopic images.

scholarly journals Analysis of PLA Composite Filaments Reinforced with Lignin and Polymerised-Lignin-Treated NFC

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2174
Author(s):  
Diana Gregor-Svetec ◽  
Mirjam Leskovšek ◽  
Blaž Leskovar ◽  
Urška Stanković Elesini ◽  
Urška Vrabič-Brodnjak
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Tensile Strength ◽  
Glassy State ◽  
Nanofibrillated Cellulose ◽  
Dynamic Mechanical Properties ◽  
Initial Modulus ◽  
Surface Modified ◽  
Scanning Electron

Polylactic acid (PLA) is one of the most suitable materials for 3D printing. Blending with nanoparticles improves some of its properties, broadening its application possibilities. The article presents a study of composite PLA matrix filaments with added unmodified and lignin/polymerised lignin surface-modified nanofibrillated cellulose (NFC). The influence of untreated and surface-modified NFC on morphological, mechanical, technological, infrared spectroscopic, and dynamic mechanical properties was evaluated for different groups of samples. As determined by the stereo and scanning electron microscopy, the unmodified and surface-modified NFCs with lignin and polymerised lignin were present in the form of plate-shaped agglomerates. The addition of NFC slightly reduced the filaments’ tensile strength, stretchability, and ability to absorb energy, while in contrast, the initial modulus slightly improved. By adding NFC to the PLA matrix, the bending storage modulus (E’) decreased slightly at lower temperatures, especially in the PLA samples with 3 wt% and 5 wt% NFC. When NFC was modified with lignin and polymerised lignin, an increase in E’ was noticed, especially in the glassy state.

scholarly journals Corrosion Behavior and Mechanical Properties of a Nanocomposite Superhydrophobic Coating

Coatings ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 652
Author(s):  
Divine Sebastian ◽  
Chun-Wei Yao ◽  
Lutfun Nipa ◽  
Ian Lian ◽  
Gary Twu
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Nanocomposite Coating ◽  
Superhydrophobic Coating ◽  
Force Microscopy ◽  
Atomic Force ◽  
Microscopy Images ◽  
Scanning Electron

In this work, a mechanically durable anticorrosion superhydrophobic coating is developed using a nanocomposite coating solution composed of silica nanoparticles and epoxy resin. The nanocomposite coating developed was tested for its superhydrophobic behavior using goniometry; surface morphology using scanning electron microscopy and atomic force microscopy; elemental composition using energy dispersive X-ray spectroscopy; corrosion resistance using atomic force microscopy; and potentiodynamic polarization measurements. The nanocomposite coating possesses hierarchical micro/nanostructures, according to the scanning electron microscopy images, and the presence of such structures was further confirmed by the atomic force microscopy images. The developed nanocomposite coating was found to be highly superhydrophobic as well as corrosion resistant, according to the results from static contact angle measurement and potentiodynamic polarization measurement, respectively. The abrasion resistance and mechanical durability of the nanocomposite coating were studied by abrasion tests, and the mechanical properties such as reduced modulus and Berkovich hardness were evaluated with the aid of nanoindentation tests.

Research on compatibility and surface of high impact bio-based polyamide

2021 ◽  
pp. 095400832110055
Author(s):  
Yang Wang ◽  
Yuhui Zhang ◽  
Yuhan Xu ◽  
Xiucai Liu ◽  
Weihong Guo
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Crystallization Behavior ◽  
High Impact ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

The super-tough bio-based nylon was prepared by melt extrusion. In order to improve the compatibility between bio-based nylon and elastomer, the elastomer POE was grafted with maleic anhydride. Scanning Electron Microscopy (SEM) and Thermogravimetric Analysis (TGA) were used to study the compatibility and micro-distribution between super-tough bio-based nylon and toughened elastomers. The results of mechanical strength experiments show that the 20% content of POE-g-MAH has the best toughening effect. After toughening, the toughness of the super-tough nylon was significantly improved. The notched impact strength was 88 kJ/m2 increasing by 1700%, which was in line with the industrial super-tough nylon. X-ray Diffraction (XRD) and Differential Scanning Calorimetry (DSC) were used to study the crystallization behavior of bio-based PA56, and the effect of bio-based PA56 with high crystallinity on mechanical properties was analyzed from the microstructure.

Sign in / Sign up

Export Citation Format

Share Document