scholarly journals Modeling Contrasts in Variable Pressure Scanning Electron Microscopes

2002 ◽  
Vol 8 (S02) ◽  
pp. 452-453
Author(s):  
Raynald Gauvin ◽  
Hendrix Demers ◽  
Kevin Robertson ◽  
James Finch
Keyword(s):  
Variable Pressure ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Scanning Electron

Analysis of Interesting Materials in the Environmental SEM: You Put What in Your Microscope?

2001 ◽  
Vol 7 (S2) ◽  
pp. 776-777
Author(s):  
John F. Mansfield
Keyword(s):  
Electron Microscope ◽  
Chemical Engineering ◽  
Materials Science ◽  
Variable Pressure ◽  
Environmental Scanning ◽  
Specimen Preparation ◽  
Wide Range ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Scanning Electron

The environmental scanning electron microscope (ESEM™) and variable pressure electron microscope (VPSEM) have become accepted tools in the contemporary electron microscopy facility. Their flexibility and their ability to image almost any sample with little, and often no, specimen preparation has proved so attractive that each manufacturer of scanning electron microscopes now markets a low vacuum model.The University of Michigan Electron Microbeam Analysis Laboratory (EMAL) operates two variable pressure instruments, an ElectroScan E3 ESEM and a Hitachi S3200N VPSEM. The E3 ESEM was acquired in the early 1990s with funding from the Amoco Foundation and it has been used to examine an extremely wide variety of different materials. Since EMAL serves the entire university community, and offers support to neighboring institutions and local industry, the types of materials examined span a wide range. There are users from Materials Science & Engineering, Chemical Engineering, Nuclear Engineering, Electrical Engineering, Physics, Chemistry, Geology, Biology, Biophysics, Pharmacy and Pharmacology.

Scintillation SE detector for variable pressure scanning electron microscopes

2010 ◽  
Vol 239 (3) ◽  
pp. 233-238 ◽  
Author(s):  
J. JIRÁK ◽  
V. NEDĚLA ◽  
P. ČERNOCH ◽  
P. ČUDEK ◽  
J. RUNŠTUK
Keyword(s):  
Variable Pressure ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Scanning Electron

Application of Peltier Cooling Device in a Variable-Pressure SEM

2015 ◽  
Vol 231 ◽  
pp. 139-144
Author(s):  
Anna Wassilkowska ◽  
Teresa Woźniakiewicz
Keyword(s):  
Observation Time ◽  
Variable Pressure ◽  
Water Protection ◽  
Cooling Device ◽  
Peltier Cooling ◽  
Optimal Observation ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Imaging Conditions ◽  
Scanning Electron

In environmental monitoring and water protection one has to deal with various hydrated specimens, and therefore, there is a need for scanning electron microscopes which are suited for hydrated specimens. Wet specimens can be observed in a hydrated state using a commercial Peltier cooling holder for conventional microscopes. However, the optimization of the time of observation for the sample needs to be determined by carrying out experiments in advance for specifically determining the optimal observation time. The temperature-pressure conditions also require optimization to obtain good quality images of amoeba and fungi. Further studies are required to establish whether the same imaging conditions would be possible to replicate closely the observation on other biological specimens.

Current State of Biological High-Resolution Scanning Electron Microscopy

1988 ◽  
Vol 46 ◽  
pp. 180-181 ◽  
Author(s):  
Klaus-Ruediger Peters
Keyword(s):  
High Performance ◽  
Low Voltage ◽  
Backscattered Electrons ◽  
Lens Position ◽  
Low Voltage Operation ◽  
Signal Collection ◽  
Probe Size ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Scanning Electron

A new generation of high performance field emission scanning electron microscopes (FSEM) is now commercially available (JEOL 890, Hitachi S 900, ISI OS 130-F) characterized by an "in lens" position of the specimen where probe diameters are reduced and signal collection improved. Additionally, low voltage operation is extended to 1 kV. Compared to the first generation of FSEM (JE0L JSM 30, Hitachi S 800), which utilized a specimen position below the final lens, specimen size had to be reduced but useful magnification could be impressively increased in both low (1-4 kV) and high (5-40 kV) voltage operation, i.e. from 50,000 to 200,000 and 250,000 to 1,000,000 x respectively.At high accelerating voltage and magnification, contrasts on biological specimens are well characterized1 and are produced by the entering probe electrons in the outmost surface layer within -vl nm depth. Backscattered electrons produce only a background signal. Under these conditions (FIG. 1) image quality is similar to conventional TEM (FIG. 2) and only limited at magnifications >1,000,000 x by probe size (0.5 nm) or non-localization effects (%0.5 nm).

Observation of GaAs/AlAs Superlattice Structures in both Secondary and Backscattcred Electron Imaging Modes with an Ultrahigh Resolution Scanning Electron Microscope

1990 ◽  
Vol 48 (1) ◽  
pp. 404-405
Author(s):  
K. Ogura ◽  
A. Ono ◽  
S. Franchi ◽  
P.G. Merli ◽  
A. Migliori
Keyword(s):  
Gaas Layer ◽  
Objective Lens ◽  
Superlattice Structure ◽  
Backscattered Electron ◽  
Instrumental Resolution ◽  
Electron Microscopes ◽  
Superlattice Structures ◽  
Electron Imaging ◽  
Scanning Electron Microscopes ◽  
Scanning Electron

In the last few years the development of Scanning Electron Microscopes (SEM), equipped with a Field Emission Gun (FEG) and using in-lens specimen position, has allowed a significant improvement of the instrumental resolution . This is a result of the fine and bright probe provided by the FEG and by the reduced aberration coefficients of the strongly excited objective lens. The smaller specimen size required by in-lens instruments (about 1 cm, in comparison to 15 or 20 cm of a conventional SEM) doesn’t represent a serious limitation in the evaluation of semiconductor process techniques, where the demand of high resolution is continuosly increasing. In this field one of the more interesting applications, already described (1), is the observation of superlattice structures.In this note we report a comparison between secondary electron (SE) and backscattered electron (BSE) images of a GaAs / AlAs superlattice structure, whose cross section is reported in fig. 1. The structure consist of a 3 nm GaAs layer and 10 pairs of 7 nm GaAs / 15 nm AlAs layers grown on GaAs substrate. Fig. 2, 3 and 4 are SE images of this structure made with a JEOL JSM 890 SEM operating at an accelerating voltage of 3, 15 and 25 kV respectively. Fig. 5 is a 25 kV BSE image of the same specimen. It can be noticed that the 3nm layer is always visible and that the 3 kV SE image, in spite of the poorer resolution, shows the same contrast of the BSE image. In the SE mode, an increase of the accelerating voltage produces a contrast inversion. On the contrary, when observed with BSE, the layers of GaAs are always brighter than the AlAs ones , independently of the beam energy.

Discoasters of the Blue Clay (Middle Miocene) of Malta and Gozo

1978 ◽  
Vol 115 (1) ◽  
pp. 1-19 ◽  
Author(s):  
Minoo Hojjatzadeh
Keyword(s):  
Middle Miocene ◽  
The Family ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Scanning Electron

SummaryTwenty-three species of the Family Discoasteraceae Vekshina, 1959 recovered from 18 samples of the Blue Clay at Fort Chambray, Gozo, and 31 samples from Fomm-Ir-Rih Bay, Malta, have been studied under light and scanning electron microscopes. Fourteen Middle Miocene species are reviewed, their stratigraphical ranges and importance as marker species discussed. Nine species are described as new. On the basis of the discoaster species present, a Middle Miocene age (NN.6 Discoaster exilis Zone – NN.7 Discoaster kugleri Zone) for the Blue Clay in Malta and Gozo is suggested.

scholarly journals Ultrastructure of cleistothecia and the stages of life cycle of Microsphaera palczewskii by scanning electron microscope

2014 ◽  
Vol 32 (2) ◽  
pp. 275-278
Author(s):  
Joanna Z. Kadłubowska ◽  
Ewa Kalinowska-Kucharska
Keyword(s):  
Electron Microscope ◽  
Life Cycle ◽  
Scanning Electron Microscope ◽  
Scanning Microscopy ◽  
Developmental Cycle ◽  
Central Poland ◽  
Caragana Arborescens ◽  
Electron Microscopes ◽  
Scanning Electron Microscopes ◽  
Scanning Electron

Several year long investigations of the developmental cycle of <i>Microsphaera palczewskii</i> occurring on the leaves of <i>Caragana arborescens</i> in Central Poland are reported. The material was studied with light and scanning electron microscopes. The scanning microscopy micrographs of the clistothecia and appendages presented in this report are the first micrographs of this species.

Sign in / Sign up

Export Citation Format

Share Document