scholarly journals Microstructure and Formation Mechanisms of δ-Hydrides in Variable Grain Size Zircaloy-4 Studied by Electron Backscatter Diffraction

2019 ◽  
Vol 25 (S2) ◽  
pp. 1588-1589
Author(s):  
Siyang Wang ◽  
Finn Giuliani ◽  
T. Ben Britton
Keyword(s):  
Grain Size ◽  
Electron Backscatter Diffraction ◽  
Formation Mechanisms ◽  
Electron Backscatter ◽  
Backscatter Diffraction

scholarly journals A multivariate grain size and orientation distribution function: derivation from electron backscatter diffraction data and applications

2021 ◽  
Vol 54 (1) ◽  
Author(s):  
Jesús Galán López ◽  
Leo A. I. Kestens
Keyword(s):  
Grain Size ◽  
Distribution Function ◽  
Orientation Distribution Function ◽  
Diffraction Data ◽  
Electron Backscatter Diffraction ◽  
Orientation Distribution ◽  
Formation Mechanisms ◽  
Electron Backscatter ◽  
Backscatter Diffraction ◽  
Grain Size And Orientation

Two of the microstructural parameters most influential in the properties of polycrystalline materials are grain size and crystallographic texture. Although both properties have been extensively studied and there are a wide range of analysis tools available, they are generally considered independently, without taking into account the possible correlations between them. However, there are reasons to assume that grain size and orientation are correlated microstructural state variables, as they are the result of single microstructural formation mechanisms occurring during material processing. In this work, the grain size distribution and orientation distribution functions are combined in a single multivariate grain size orientation distribution function (GSODF). In addition to the derivation of the function, several examples of practical applications to low carbon steels are presented, in which it is shown how the GSODF can be used in the analysis of 2D and 3D electron backscatter diffraction data, as well as in the generation of representative volume elements for full-field models and as input in simulations using mean-field methods.

scholarly journals Application of Electron Backscatter Diffraction (EBSD) for Crystallographic Characterization of Aluminum-Doped Zinc Oxide Sputtered Films

2013 ◽  
Vol 19 (S4) ◽  
pp. 103-104
Author(s):  
C.B. Garcia ◽  
E. Ariza ◽  
C.J. Tavares
Keyword(s):  
Electron Microscopy ◽  
Grain Size ◽  
Zinc Oxide ◽  
Electron Backscatter Diffraction ◽  
Wide Range ◽  
Electron Backscatter ◽  
Aluminum Doped Zinc Oxide ◽  
Ebsd Technique ◽  
Backscatter Diffraction

Zinc Oxide is a wide band-gap compound semiconductor that has been used in optoelectronic and photovoltaic applications due to its good electrical and optical properties. Aluminium has been an efficient n-type dopant for ZnO to produce low resistivity films and high transparency to visible light. In addition, the improvement of these properties also depends on the morphology, crystalline structure and deposition parameters. In this work, ZnO:Al films were produced by d.c. pulsed magnetron sputtering deposition from a ZnO ceramic target (2.0 wt% Al2O3) on glass substrates, at a temperature of 250 ºC.The crystallographic orientation of aluminum doped zinc oxide (ZnO:Al) thin films has been studied by Electron Backscatter Diffraction (EBSD) technique. EBSD coupled with Scanning Electron Microscopy (SEM) is a powerful tool for the microstructural and crystallographic characterization of a wide range of materials.The investigation by EBSD technique of such films presents some challenges since this analysis requires a flat and smooth surface. This is a necessary condition to avoid any shadow effects during the experiments performed with high tilting conditions (70º). This is also essential to ensure a good control of the three dimensional projection of the crystalline axes on the geometrical references related to the sample.Crystalline texture is described by the inverse pole figure (IPF) maps (Figure 1). Through EBSD analysis it was observed that the external surface of the film presents a strong texture on the basal plane orientation (grains highlighted in red colour). Furthermore it was possible to verify that the grain size strongly depends on the deposition time (Figure 1 (a) and (b)). The electrical and optical film properties improve with increasing of the grain size, which can be mainly, attributed to the decrease in scattering grain boundaries which leads to an increasing in carrier mobility (Figure 2).The authors kindly acknowledge the financial support from the Portuguese Foundation for Science and Technology (FCT) scientific program for the National Network of Electron Microscopy (RNME) EDE/1511/RME/2005.

scholarly journals Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin2ψ and cosα methods

2019 ◽  
Vol 52 (4) ◽  
pp. 828-843 ◽  
Author(s):  
Dorian Delbergue ◽  
Damien Texier ◽  
Martin Lévesque ◽  
Philippe Bocher
Keyword(s):  
Residual Stress ◽  
Grain Size ◽  
Tilt Angle ◽  
Measurement Errors ◽  
Electron Backscatter Diffraction ◽  
Measurement Techniques ◽  
Single Exposure ◽  
X Ray ◽  
Electron Backscatter ◽  
Backscatter Diffraction

X-ray diffraction (XRD) is a widely used technique to evaluate residual stresses in crystalline materials. Several XRD measurement methods are available. (i) The sin2ψ method, a multiple-exposure technique, uses linear detectors to capture intercepts of the Debye–Scherrer rings, losing the major portion of the diffracting signal. (ii) The cosα method, thanks to the development of compact 2D detectors allowing the entire Debye–Scherrer ring to be captured in a single exposure, is an alternative method for residual stress measurement. The present article compares the two calculation methods in a new manner, by looking at the possible measurement errors related to each method. To this end, sets of grains in diffraction condition were first identified from electron backscatter diffraction (EBSD) mapping of Inconel 718 samples for each XRD calculation method and its associated detector, as each method provides different sets owing to the detector geometry or to the method specificities (such as tilt-angle number or Debye–Scherrer ring division). The X-ray elastic constant (XEC) ½S 2, calculated from EBSD maps for the {311} lattice planes, was determined and compared for the different sets of diffracting grains. It was observed that the 2D detector captures 1.5 times more grains in a single exposure (one tilt angle) than the linear detectors for nine tilt angles. Different XEC mean values were found for the sets of grains from the two XRD techniques/detectors. Grain-size effects were simulated, as well as detector oscillations to overcome them. A bimodal grain-size distribution effect and `artificial' textures introduced by XRD measurement techniques are also discussed.

An Investigation of Microtexture Evolution in an AlMgSi Alloy Processed by High-Pressure Torsion

2011 ◽  
Vol 702-703 ◽  
pp. 165-168 ◽  
Author(s):  
Aicha Loucif ◽  
Thierry Baudin ◽  
François Brisset ◽  
Roberto B. Figueiredo ◽  
Rafik Chemam ◽  
...  
Keyword(s):  
Grain Size ◽  
High Pressure ◽  
Distribution Function ◽  
High Pressure Torsion ◽  
Electron Backscatter Diffraction ◽  
Orientation Distribution ◽  
Homogeneous Microstructure ◽  
Electron Backscatter ◽  
Backscatter Diffraction ◽  
Almgsi Alloy

This investigation uses electron backscatter diffraction (EBSD) to study the development of microtexture with increasing deformation in an AlMgSi alloy having an initial grain size of about 150 µm subjected to high pressure torsion (HPT) up to a total of 5 turns. An homogeneous microstructure was achieved throughout the disc sample at high strains with the formation of ultra-fine grains. Observations based on orientation distribution function (ODF) calculation reveals the presence of the torsion texture components often reported in the literature for f.c.c. materials. In particular, the C {001}<110> component was found to be dominant. Furthermore, no significant change in the texture sharpness was observed by increasing the strain.

Sign in / Sign up

Export Citation Format

Share Document