Evaluation of Dicamba Persistence among Various Agricultural Hose Types and Cleanout Procedures Using Soybean (Glycine max) as a Bio-Indicator

Weed Science ◽  
2017 ◽  
Vol 65 (2) ◽  
pp. 305-316 ◽  
Author(s):  
Gary T. Cundiff ◽  
Daniel B. Reynolds ◽  
Thomas C. Mueller
Keyword(s):  
Electron Microscopy ◽  
Dry Matter ◽  
Dry Matter Yield ◽  
Polyethylene Blends ◽  
Synthetic Rubber ◽  
Polyethylene Blend ◽  
Sequestration Potential ◽  
Wall Depletion ◽  
Scanning Electron ◽  
Methoxybenzoic Acid

Synthetic rubbers, synthetic plastic polymers (polyvinyl chlorides [PVC]), polyurethane blends, and polyethylene blends make up modern-day agricultural spray hoses. The objective of this study was to determine whether agricultural hose types would differ with respect to 3,6-dichloro-2-methoxybenzoic acid (dicamba) sequestration. Field and greenhouse studies were conducted to evaluate the sequestration potential of dicamba within five agricultural hose types when cleaned with different cleanout procedures. Rinsate solutions were applied to soybean, which was used as a bio-indicator to test for cleanout efficiency. Differences among hose types and cleanout procedures exist with observations including soybean injury, height reduction, dry matter, yield, and part per million by volume (ppmv) analyte retained. The makeup of PVC polyurethane-blend and synthetic rubber–blend hoses increased retention of dicamba analyte when compared with the polyethylene blend hose. No differences were observed after the addition of ammonia to the cleanout solution when compared with water alone. Differences in a hose type’s ability to sequester the dicamba analyte may have more to do with the hose’s internal chemical composition, manufacturing process, and composition breakdown. Scanning electron microscopy revealed imperfections in new PVC polyurethane and synthetic rubber hoses that eventually lead to inner wall depletion of these hose types. This is in contrast to what was found in the polyethylene-blend hose type, in which the inner wall is smooth and free of imperfections.

scholarly journals Improvement of Mechanical and Rheological Properties of Natural Rubber for Anti-Vibration Applications

2017 ◽  
Vol 13 (2) ◽  
Author(s):  
Nabel K. Abd Ali ◽  
Malia. M. Farhan ◽  
Abbas S . Moosa
Keyword(s):  
Electron Microscopy ◽  
Natural Rubber ◽  
Mechanical Tests ◽  
Friction Resistance ◽  
Synthetic Rubber ◽  
Structure Morphology ◽  
Rheological Test ◽  
Sem Test ◽  
Master Batch ◽  
Scanning Electron

Abstract   This research aims to study and improve the passivating specifications of rubber resistant to  vibration. In this paper, seven different rubber recipes were prepared based on mixtures of natural rubber(NR)  as an essential part in addition to the synthetic rubber (IIR, BRcis, SBR, CR)with different rates. Mechanical tests such as tensile strength, hardness, friction, resistance to compression, fatigue and creep testing in addition to the rheological test were performed. Furthermore, scanning electron microscopy (SEM)test was used to examine the structure morphology of rubber. After studying and analyzing the results, we found that, recipe containing (BRcis) of 40% from the natural rubber has the best mechanical and physical specifications to be used in applications that require the presence of rubber, resistant to vibration. Keywords: Ant vibration behavior , Natural rubber, Synthetic rubber, master batch.

scholarly journals Development of Thermoplastic Starch (TPS) Including Leather Waste Fragments

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1811 ◽  
Author(s):  
Silvio Pompei ◽  
Jacopo Tirillò ◽  
Fabrizio Sarasini ◽  
Carlo Santulli
Keyword(s):  
Electron Microscopy ◽  
Dry Matter ◽  
Corn Starch ◽  
Tensile Tests ◽  
Thermoplastic Starch ◽  
Maximum Temperature ◽  
Material Degradation ◽  
Brittle Behavior ◽  
Leather Waste ◽  
Scanning Electron

A thermoplastic starch (TPS) material is developed, based on corn starch plasticized with glycerol and citric acid in a 9:3:1 ratio and further bonded with isinglass and mono- and diglycerides of fatty acids (E471). In TPS, leather fragments, in the amount of 7.5 15 or 22.5 g/100 g of dry matter, were also introduced. The mixture was heated at a maximum temperature of 80 °C, then cast in an open mold to obtain films with thickness in the range 300 ± 50 microns. The leather fragments used were based on collagen obtained from production waste from shoemaking and tanned with tannins obtained from smoketree (Rhus cotinus), therefore free from chromium. Thermogravimetric (TGA) tests suggested that material degradation started at a temperature around 285 °C, revealing that the presence of leather fragments did not influence the occurrence of this process in TPS. Tensile tests indicated an increase in tensile properties (strength and Young’s modulus) with increasing leather content, albeit coupled, especially at 22.5 wt%, with a more pronounced brittle behavior. Leather waste provided a sound interface with the bulk of the composite, as observed under scanning electron microscopy. The production process indicated a very limited degradation of the material after exposure to UV radiation for eight days, as demonstrated by the slight attenuation of amide I (collagen) and polysaccharide FTIR peaks. Reheating at 80 °C resulted in a weight loss not exceeding 3%.

scholarly journals Scanning Electron Microscopy and Kinetic Studies of Ketene-Acetylated Wood/Cellulose High-Density Polyethylene Blends

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Yakubu Azeh ◽  
Gabriel Ademola Olatunji ◽  
Paul Andrew Mamza
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Kinetic Studies ◽  
Wood Cellulose ◽  
Polyethylene Matrix ◽  
Polyethylene Blends ◽  
Morphological Studies ◽  
Alkali Solutions ◽  
Absorption Studies ◽  
Scanning Electron

Acetylated cellulose and wood cellulose as well as untreated cellulose polyethylene blends were subjected to kinetic studies using water, 0.5 M NaOH, and 0.5 M HCl solutions in order to investigate their absorbent properties at 0.5/1.0 cellulose/wood cellulose/polyethylene matrix. The results of the absorption studies showed that the untreated cellulose and wood cellulose blends absorbed water and the acid and alkali solutions higher than the treated samples, which showed a reduction in acid, alkali, and water uptake. In this work, the effects of acetylation on the morphological studies of the polyethylene blends were obvious. The presence of acetyl groups improved the interfacial bonding between the polymer matrix and cellulose as well as the wood cellulose fibers, as evidenced by scanning electron microscopy (SEM).

Pathogenesis of Human Hair Defects

1974 ◽  
Vol 32 ◽  
pp. 12-13
Author(s):  
P.S. Porter ◽  
T. Aoyagi ◽  
R. Matta
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Human Hair ◽  
Standard Techniques ◽  
Scanning Electron

Using standard techniques of scanning electron microscopy (SEM), over 1000 human hair defects have been studied. In several of the defects, the pathogenesis of the abnormality has been clarified using these techniques. It is the purpose of this paper to present several distinct morphologic abnormalities of hair and to discuss their pathogenesis as elucidated through techniques of scanning electron microscopy.

The Critical Point Drying Method Applied to Scanning Electron Microscopy of L-929 Cells

1970 ◽  
Vol 28 ◽  
pp. 278-279
Author(s):  
Charles TurnbiLL ◽  
Delbert E. Philpott
Keyword(s):  
Electron Microscopy ◽  
Carbon Dioxide ◽  
Surface Tension ◽  
Critical Point ◽  
Freeze Drying ◽  
Attractive Alternative ◽  
Crystal Formation ◽  
Critical Point Drying ◽  
Time Required ◽  
Scanning Electron

The advent of the scanning electron microscope (SCEM) has renewed interest in preparing specimens by avoiding the forces of surface tension. The present method of freeze drying by Boyde and Barger (1969) and Small and Marszalek (1969) does prevent surface tension but ice crystal formation and time required for pumping out the specimen to dryness has discouraged us. We believe an attractive alternative to freeze drying is the critical point method originated by Anderson (1951; for electron microscopy. He avoided surface tension effects during drying by first exchanging the specimen water with alcohol, amy L acetate and then with carbon dioxide. He then selected a specific temperature (36.5°C) and pressure (72 Atm.) at which carbon dioxide would pass from the liquid to the gaseous phase without the effect of surface tension This combination of temperature and, pressure is known as the "critical point" of the Liquid.

Ultrastructural Analysis of the Salivary Glands of Gromphadorhina Portentosa (Schaum)

1977 ◽  
Vol 35 ◽  
pp. 638-639
Author(s):  
P.J. Dailey
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Salivary Glands ◽  
Secretory Vesicles ◽  
The Past ◽  
Transmission Electron ◽  
Means Of Transmission ◽  
Gromphadorhina Portentosa ◽  
Scanning Electron ◽  
Topographical Relief

The structure of insect salivary glands has been extensively investigated during the past decade; however, none have attempted scanning electron microscopy (SEM) in ultrastructural examinations of these secretory organs. This study correlates fine structure by means of SEM cryofractography with that of thin-sectioned epoxy embedded material observed by means of transmission electron microscopy (TEM).Salivary glands of Gromphadorhina portentosa were excised and immediately submerged in cold (4°C) paraformaldehyde-glutaraldehyde fixative1 for 2 hr, washed and post-fixed in 1 per cent 0s04 in phosphosphate buffer (4°C for 2 hr). After ethanolic dehydration half of the samples were embedded in Epon 812 for TEM and half cryofractured and subsequently critical point dried for SEM. Dried specimens were mounted on aluminum stubs and coated with approximately 150 Å of gold in a cold sputtering apparatus.Figure 1 shows a cryofractured plane through a salivary acinus revealing topographical relief of secretory vesicles.

Sign in / Sign up

Export Citation Format

Share Document