Gallic Acid-Aided Cross-Linking of Myofibrillar Protein Fabricated Soluble Aggregates for Enhanced Thermal Stability and a Tunable Colloidal State

2020 ◽  
Vol 68 (41) ◽  
pp. 11535-11544 ◽  
Author(s):  
Kaiwen Chen ◽  
Xing Chen ◽  
Li Liang ◽  
Xinglian Xu
2021 ◽  
Vol 22 (7) ◽  
pp. 3346
Author(s):  
Agata Sommer ◽  
Paulina Dederko-Kantowicz ◽  
Hanna Staroszczyk ◽  
Sławomir Sommer ◽  
Marek Michalec

This article compares the properties of bacterial cellulose/fish collagen composites (BC/Col) after enzymatic and chemical cross-linking. In our methodology, two transglutaminases are used for enzymatic cross-linking—one recommended for the meat and the other proposed for the fish industry—and pre-oxidated BC (oxBC) is used for chemical cross-linking. The structure of the obtained composites is characterized by scanning electron microscopy, thermogravimetric analysis, X-ray diffraction, and Fourier transform infrared spectroscopy, and their functional properties by mechanical and water barrier tests. While polymer chains in uncross-linked BC/Col are intertwined by H-bonds, new covalent bonds in enzymatically cross-linked ones are formed—resulting in increased thermal stability and crystallinity of the material. The C2–C3 bonds cleavage in D-glucose units, due to BC oxidation, cause secondary alcohol groups to vanish in favor of the carbonyl groups’ formation, thus reducing the number of H-bonded OHs. Thermal stability and crystallinity of oxBC/Col remain lower than those of BC/Col. The BC/Col formation did not affect tensile strength and water vapor permeability of BC, but enzymatic cross-linking with TGGS improved them significantly.


2018 ◽  
Vol 6 (9) ◽  
pp. 1561-1570 ◽  
Author(s):  
Mohamed Ali Seyed ◽  
Kavitha Vijayaraghavan

BACKGROUND: Corneal blindness resulting from various medical conditions affects millions worldwide. The rapid developing tissue engineering field offers design of a scaffold with mechanical properties and transparency similar to that of the natural cornea. AIM: The present study aimed at to prepare and investigate the properties of PVA/chitosan blended scaffold by further cross-linking with 1-Ethyl-3-(3-dimethyl aminopropyl)-carbodiimide (EDC) and 2 N-Hydroxysuccinimide (NHS) as potential in vitro carrier for human limbal stem cells delivery. MATERIAL AND METHODS: Acetic acid dissolved chitosan was added to PVA solution, uniformly mixed with a homogenizer until the mixture was in a colloidal state, followed by H2SO4 and formaldehyde added and the sample was allowed to cool, subsequently it was poured into a tube and heated in an oven at 60°C for 50 minutes. Finally, samples were soaked in a cross-linking bath with EDC, NHS and NaOH in H2O/EtOH for 24 h consecutively stirred to cross-link the polymeric chains, reduce degradation. After soaking in the bath, the samples were carefully washed with 2% glycine aqueous solution several times to remove the remaining amount of cross-linkers, followed by washed with water to remove residual agents. Later the cross-linked scaffold subjected for various characterization and biological experiments. RESULTS: After viscosity measurement, the scaffold was observed by Fourier transform infrared (FT-IR). The water absorbency of PVA/Chitosan was increased 361% by swelling. Compression testing demonstrated that by increasing the amount of chitosan, the strength of the scaffold could be increased to 16×10−1 MPa. Our degradation results revealed by mass loss using equation shows that scaffold degraded gradually imply slow degradation. In vitro tests showed good cell proliferation and growth in the scaffold. Our assay results confirmed that the membrane could increase the cells adhesion and growth on the substrate. CONCLUSION: Hence, we strongly believe the use of this improved PVA/chitosan scaffold has potential to cut down the disadvantages of the human amniotic membrane (HAM) for corneal epithelium in ocular surface surgery and greater mechanical strength in future after successful experimentation with clinical trials.


1996 ◽  
Vol 46 (2) ◽  
pp. 479-487 ◽  
Author(s):  
M. Drábik ◽  
Lubica Gáliková ◽  
Zuzana Sadleková ◽  
Mária Kubranová

Polymers ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 176 ◽  
Author(s):  
Wei Dong ◽  
Xuan Wang ◽  
Bo Tian ◽  
Yuguang Liu ◽  
Zaixing Jiang ◽  
...  

Aromatic voltage stabilizers can improve the dielectric properties of cross-linked polyethylene (XLPE); however, their poor compatibility with XLPE hinders their practical application. Improving the compatibility of aromatic voltage stabilizers with XLPE has, therefore, become a new research goal. Herein 1-(4-vinyloxy)phenylethenone (VPE) was prepared and characterized. It can be grafted onto polyethylene molecules during the cross-linking processes to promote stability of the aromatic voltage stabilizers in XLPE. Fourier transform infrared spectroscopy confirmed that VPE was successfully grafted onto XLPE, and effectively inhibited thermal migration. Thermogravimetric analysis showed that the grafted VPE/XLPE composite exhibits a better thermal stability than a VPE/PE blend composite. Evaluation of the electrical properties showed that the breakdown strength and electrical tree initiation voltage of the VPE/XLPE composite were increased by 15.5% and 39.6%, respectively, when compared to those of bare XLPE. After thermal aging, the breakdown strength and electrical tree initiation voltage of the VPE/XLPE composite were increased by 9.4% and 25.8%, respectively, in comparison to those of bare XLPE, which indicates that the grafted voltage stabilizer can effectively inhibit its migration and enhance the stability of the composite material.


2008 ◽  
Vol 17 (1) ◽  
pp. 096369350801700 ◽  
Author(s):  
Zdeno Špitalský ◽  
Alexander Kromka ◽  
Libor Matějka ◽  
Peter Černoch ◽  
Jana Kovářová ◽  
...  

The epoxy nanocomposites filled with 0.1, 0.5, and 1 wt% nanodiamonds (nanoD) were prepared and their properties were compared with neat epoxy network or epoxy nanocomposite filled with 1 wt% multiwalled carbon nanotubes (MWCNTs). The obtained nanoD-epoxy composites increased significantly thermal stability of prepared nanocomposites in comparison with neat epoxy matrix. The exponential decay of light transmittance with increasing concentration of nanoD in sample was observed. The values of storage modulus G` and glass transition temperature Tg significantly decreased by addition of nanoD to epoxy network. This is caused by inhibition of cross-linking reaction of epoxy- and amino- groups by nanoD.


2008 ◽  
Vol 20 (22) ◽  
pp. 7148-7156 ◽  
Author(s):  
Vladislav Ischenko ◽  
Eckhard Pippel ◽  
Jörg Woltersdorf ◽  
B. Rodrigue Ngoumeni Yappi ◽  
Ralf Hauser ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document