Complex High-Internal Phase Emulsions that can Form Interfacial Films with Tunable Morphologies

Langmuir ◽  
2021 ◽  
Author(s):  
Tao Li ◽  
Ruipei Xie ◽  
Wei Chen ◽  
Andrew B. Schofield ◽  
Paul S. Clegg
Keyword(s):  
Internal Phase ◽  
Interfacial Films

TEM studies of amorphization processes and amorphous structures

1988 ◽  
Vol 46 ◽  
pp. 448-449
Author(s):  
T. E. Mitchell ◽  
R. B. Schwarz
Keyword(s):  
Amorphous Materials ◽  
Fission Products ◽  
Rapid Quenching ◽  
Surface Films ◽  
List Type ◽  
Oxide Glasses ◽  
Crystalline Materials ◽  
Amorphous Structures ◽  
Amorphous Surface ◽  
Interfacial Films

Traditional oxide glasses occur naturally as obsidian and can be made easily by suitable cooling histories. In the past 30 years, a variety of techniques have been discovered which amorphize normally crystalline materials such as metals. These include [1-3]:Rapid quenching from the vapor phase.Rapid quenching from the liquid phase.Electrodeposition of certain alloys, e.g. Fe-P.Oxidation of crystals to produce amorphous surface oxide layers.Interdiffusion of two pure crystalline metals.Hydrogen-induced vitrification of an intermetal1ic.Mechanical alloying and ball-milling of intermetal lie compounds.Irradiation processes of all kinds using ions, electrons, neutrons, and fission products.We offer here some general comments on the use of TEM to study these materials and give some particular examples of such studies.Thin specimens can be prepared from bulk homogeneous materials in the usual way. Most often, however, amorphous materials are in the form of surface films or interfacial films with different chemistry from the substrates.

Microstructural Evaluation of Silicon Carbide Whisker Reinforced Alumina Fabricated with Carbon-Coated Whiskers

1991 ◽  
Vol 49 ◽  
pp. 920-921
Author(s):  
K. B. Alexander ◽  
P. F. Becher
Keyword(s):  
Silicon Carbide ◽  
High Resolution Electron Microscopy ◽  
Ceramic Composites ◽  
Interface Debonding ◽  
Resolution Electron ◽  
Microstructural Evaluation ◽  
Carbon Coated ◽  
Electron Energy Loss ◽  
Interfacial Films ◽  
Debonding Process

The presence of interfacial films at the whisker-matrix interface can significantly influence the fracture toughness of ceramic composites. The film may alter the interface debonding process though changes in either the interfacial fracture energy or the residual stress at the interface. In addition, the films may affect the whisker pullout process through the frictional sliding coefficients or the extent of mechanical interlocking of the interface due to the whisker surface topography.Composites containing ACMC silicon carbide whiskers (SiCw) which had been coated with 5-10 nm of carbon and Tokai whiskers coated with 2 nm of carbon have been examined. High resolution electron microscopy (HREM) images of the interface were obtained with a JEOL 4000EX electron microscope. The whisker geometry used for HREM imaging is described in Reference 2. High spatial resolution (< 2-nm-diameter probe) parallel-collection electron energy loss spectroscopy (PEELS) measurements were obtained with a Philips EM400T/FEG microscope equipped with a Gatan Model 666 spectrometer.

Internal Phase Distribution Transition Through 90° Bends in Horizontal Configurations

2002 ◽  
Author(s):  
J.H. Park ◽  
W.L. Fu ◽  
T.W. Guo ◽  
Gunol Kojasoy
Keyword(s):  
Phase Distribution ◽  
Internal Phase

Macrocellular Titanosilicate Monoliths as Highly Efficient Structured Olefin Epoxidation Catalysts

2019 ◽  
Author(s):  
Valentin Smeets ◽  
Ludivine van den Biggelaar ◽  
Tarek Barakat ◽  
Eric M. Gaigneaux ◽  
Damien Debecker
Keyword(s):  
Sol Gel ◽  
Silica Matrix ◽  
Flow Mode ◽  
Tetrahedral Coordination ◽  
Excellent Performance ◽  
One Pot ◽  
Templating Method ◽  
Porous Texture ◽  
Internal Phase ◽  
Epoxidation Of Cyclohexene

Self-standing macrocellular titanosilicate monolith foams are obtained using a one-pot sol-gel route and show excellent performance in the epoxidation of cyclohexene. Thanks to the High Internal Phase Emulsion (HIPE) templating method, the materials feature a high void fraction, a hierarchically porous texture and good mechanical strength. Highly dispersed Ti species can be incorporated in tetrahedral coordination the silica matrix. These characteristics allow the obtained ‘SiTi(HIPE)’ materials to reach high catalytic turnover in the epoxidation of cyclohexene. The monoliths can advantageously be used to run the reaction in continuous flow mode.<br>

Nanoemulsions Loaded with Amphotericin B: Development, Characterization and Leishmanicidal Activity

2019 ◽  
Vol 25 (14) ◽  
pp. 1616-1622 ◽  
Author(s):  
Gabriela Muniz Félix Araújo ◽  
Gabriela Muniz Félix Araújo ◽  
Alana Rafaela Albuquerque Barros ◽  
Alana Rafaela Albuquerque Barros ◽  
João Augusto Oshiro-Junior ◽  
...  
Keyword(s):  
Amphotericin B ◽  
Average Diameter ◽  
Isopropyl Myristate ◽  
Neglected Diseases ◽  
Clinical Form ◽  
Hydrophobic Compounds ◽  
Internal Phase ◽  
Oil In Water ◽  
Spherical Structures ◽  
Lipid Formulations

Leishmaniasis is one of the most neglected diseases in the world. Its most severe clinical form, called visceral, if left untreated, can be fatal. Conventional therapy is based on the use of pentavalent antimonials and includes amphotericin B (AmB) as a second-choice drug. The micellar formulation of AmB, although effective, is associated with acute and chronic toxicity. Commercially-available lipid formulations emerged to overcome such drawbacks, but their high cost limits their widespread use. Drug delivery systems such as nanoemulsions (NE) have proven ability to solubilize hydrophobic compounds, improve absorption and bioavailability, increase efficacy and reduce toxicity of encapsulated drugs. NE become even more attractive because they are inexpensive and easy to prepare. The aim of this work was to incorporate AmB in NE prepared by sonicating a mixture of surfactants, Kolliphor® HS15 (KHS15) and Brij® 52, and an oil, isopropyl myristate. NE exhibited neutral pH, conductivity values consistent with oil in water systems, spherical structures with negative Zeta potential value, monomodal size distribution and average diameter of drug-containing droplets ranging from 33 to 132 nm. AmB did not modify the thermal behavior of the system, likely due to its dispersion in the internal phase. Statistically similar antileishmanial activity of AmB-loaded NE to that of AmB micellar formulation suggests further exploring them in terms of toxicity and effectiveness against amastigotes, with the aim of offering an alternative to treat visceral leishmaniasis.

scholarly journals Effect of curing bath conditions on the morphology and structure of poly(high internal phase emulsion) fibers

2020 ◽  
Vol 138 (11) ◽  
pp. 50019
Author(s):  
Xuehui Gong ◽  
Boran Zhao ◽  
Ica Manas‐Zloczower ◽  
Donald L. Feke
Keyword(s):  
High Internal Phase Emulsion ◽  
Internal Phase ◽  
Morphology And Structure

Toward Maximizing the Mechanical Property of Interconnected Macroporous Polystyrenes Made from High Internal Phase Emulsions

Langmuir ◽  
2017 ◽  
Vol 33 (50) ◽  
pp. 14295-14303 ◽  
Author(s):  
Song Wang ◽  
Jiaxu Li ◽  
Mengfei Qi ◽  
Xiang Gao ◽  
Wen-Jun Wang
Keyword(s):  
Mechanical Property ◽  
Internal Phase

Facile and Robust Route for Preparing Pickering High Internal Phase Emulsions Stabilized by Bare Zein Particles

2021 ◽  
Vol 1 (8) ◽  
pp. 1481-1491
Author(s):  
Fu-Zhen Zhou ◽  
Xin-Hao Yu ◽  
Dong-Hui Luo ◽  
Bo Liu ◽  
Tao Yang ◽  
...  
Keyword(s):  
Internal Phase

scholarly journals Porous scaffolds with the structure of an interpenetrating polymer network made by gelatin methacrylated nanoparticle-stabilized high internal phase emulsion polymerization targeted for tissue engineering

RSC Advances ◽  
2021 ◽  
Vol 11 (37) ◽  
pp. 22544-22555
Author(s):  
Atefeh Safaei-Yaraziz ◽  
Shiva Akbari-Birgani ◽  
Nasser Nikfarjam
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Cell Growth ◽  
Polymer Network ◽  
Synthetic Polymers ◽  
Tissue Scaffolds ◽  
Interpenetrating Polymer Network ◽  
Porous Scaffolds ◽  
Promising Strategy ◽  
Internal Phase

The interlacing of biopolymers and synthetic polymers is a promising strategy to fabricate hydrogel-based tissue scaffolds to biomimic a natural extracellular matrix for cell growth.

Sign in / Sign up

Export Citation Format

Share Document