Sustainable Colloidal-Silver-Impregnated Ceramic Filter for Point-of-Use Water Treatment

2008 ◽  
Vol 42 (3) ◽  
pp. 927-933 ◽  
Author(s):  
Vinka A. Oyanedel-Craver ◽  
James A. Smith
Keyword(s):  
Water Treatment ◽  
Ceramic Filter ◽  
Colloidal Silver ◽  
Point Of Use

Antibacterial silver-diatomite nanocomposite ceramic with low silver release

2019 ◽  
Vol 20 (2) ◽  
pp. 633-643
Author(s):  
Xiaopeng Qi ◽  
Junwei Chen ◽  
Qian Li ◽  
Hui Yang ◽  
Honghui Jiang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Water Treatment ◽  
Photoelectron Spectroscopy ◽  
Bactericidal Effect ◽  
Ceramic Filter ◽  
Ceramic Filters ◽  
X Ray ◽  
E Coli ◽  
Point Of Use ◽  
Silver Release

Abstract There is an urgent need for an effective and long-lasting ceramic filter for point-of-use water treatment. In this study, silver-diatomite nanocomposite ceramic filters were developed by an easy and effective method. The ceramic filters have a three-dimensional interconnected pore structure and porosity of 50.85%. Characterizations of the silver-diatomite nanocomposite ceramic filters were performed using scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. Silver nanoparticles were confirmed to be formed in situ in the ceramic filter. The highest silver concentration in water was 0.24 μg/L and 2.1 μg/L in short- and long-term experiments, indicating very low silver-release properties of silver-diatomite nanocomposite ceramic filter. The nanocomposite ceramics show strong bactericidal activity. When contact time with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) of 105 colony forming units (CFU)/mL exceeded 3 h, the bactericidal rates of the four different silver content ceramics against E. coli and S. aureus were all 100%. Strong bactericidal effect against E. coli with initial concentration of 109 CFU/mL were also observed in ceramic newly obtained and ceramic immersed in water for 270 days, demonstrating its high stability. The silver-diatomite nanocomposite ceramic filters could be a promising candidate for point-of-use water treatment.

Morphology, composition and performance of a ceramic filter for household water treatment in Indonesia

2015 ◽  
Vol 10 (2) ◽  
pp. 361-370 ◽  
Author(s):  
K. Matthies ◽  
H. Bitter ◽  
N. Deobald ◽  
M. Heinle ◽  
R. Diedel ◽  
...  
Keyword(s):  
Water Treatment ◽  
Ceramic Filter ◽  
World Health ◽  
Efficient Technology ◽  
Household Water Treatment ◽  
Governmental Organization ◽  
Virus Removal ◽  
Log Reduction ◽  
Point Of Use ◽  
Health Organization

People in rural developing areas often depend on point-of-use water treatment for safe drinking water. A very popular and efficient technology for this is the use of ceramic filters, as promoted by the non-governmental organization Potters for Peace. These filters are already used in many countries worldwide, including Indonesia, where they are manufactured in Bandung, Java by Pelita Indonesia. The filters are made of local clay and combustible material, and coated with silver after firing. However, data available on them are very scarce. The structure, composition, and physico-chemical and microbiological performance of the filter were examined. Pore sizes mostly ranged from 1 to 40 µm and flow rate was about 1.3 L/h. Silver, arsenic and manganese were leaching from the filter in remarkable concentrations. While values for silver were about 0.01–0.02 mg/L, manganese was washed out after a few liters and leaching of arsenic fell below 0.02 mg/L after filtering some liters. With a log reduction of 3–5, efficiency in bacteria reduction was satisfactory in contrast to virus removal which was not sufficient according to the World Health Organization guidelines, with a log reduction below 1.

A new generation low-cost biochar-clay composite ‘biscuit’ ceramic filter for point-of-use water treatment

2020 ◽  
Vol 185 ◽  
pp. 105409 ◽  
Author(s):  
Nhamo Chaukura ◽  
Robert Chiworeso ◽  
Willis Gwenzi ◽  
Machawe M. Motsa ◽  
Wisdom Munzeiwa ◽  
...  
Keyword(s):  
Water Treatment ◽  
Low Cost ◽  
Ceramic Filter ◽  
Point Of Use ◽  
New Generation

scholarly journals Methods, Protocols, Guidance and Standards for Performance Evaluation for Point-of-Use Water Treatment Technologies: History, Current Status, Future Needs and Directions

Water ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1094
Author(s):  
Emily S. Bailey ◽  
Nikki Beetsch ◽  
Douglas A. Wait ◽  
Hemali H. Oza ◽  
Nirmala Ronnie ◽  
...  
Keyword(s):  
Drinking Water ◽  
Water Treatment ◽  
Enteric Bacteria ◽  
Current Status ◽  
Household Water Treatment ◽  
Produce Water ◽  
Point Of Use ◽  
Treatment Technologies ◽  
Injury And Repair ◽  
Testing Protocols

It is estimated that 780 million people do not have access to improved drinking water sources and approximately 2 billion people use fecally contaminated drinking water. Effective point-of-use water treatment systems (POU) can provide water with sufficiently reduced concentrations of pathogenic enteric microorganisms to not pose significant health risks to consumers. Household water treatment (HWT) systems utilize various technologies that physically remove and/or inactivate pathogens. A limited number of governmental and other institutional entities have developed testing protocols to evaluate the performance of POU water treatment systems. Such testing protocols are essential to documenting effective performance because inferior and ineffective POU treatment technologies are thought to be in widespread use. This critical review examines specific practices, procedures and specification of widely available POU system evaluation protocols. Testing protocols should provide standardized and detailed instructions yet be sufficiently flexible to deal with different treatment technologies, test microbe priorities and choices, testing facility capabilities and public health needs. Appropriate infectivity or culture assays should be used to quantify test enteric bacteria, viruses and protozoan parasites, or other appropriate surrogates or substitutes for them, although processes based on physical removal can be tested by methods that detect microbes as particles. Recommendations include further research of stock microbe production and handling methods to consistently yield test microbes in a realistic state of aggregation and, in the case of bacteria, appropriately physiologically stressed. Bacterial quantification methods should address the phenomenon of bacterial injury and repair in order to maximally recover those that are culturable and potentially infectious. It is only with harmonized national and international testing protocols and performance targets that independent and unbiased testing can be done to assure consumers that POU treatment technologies are able to produce water of high microbial quality and low health risk.

scholarly journals Use of ceramic pot filter (CPF) technology under pressure in an in-line pumping system

2017 ◽  
Vol 18 (3) ◽  
pp. 843-852
Author(s):  
Travis D. Gardner ◽  
Joe D. Guggenberger
Keyword(s):  
Water Treatment ◽  
Low Cost ◽  
Total Coliform ◽  
Fecal Coliforms ◽  
Coliform Bacteria ◽  
Limiting Factor ◽  
Water Production ◽  
Pumping System ◽  
Point Of Use ◽  
Logarithmic Reduction

Abstract Ceramic pot filters (CPFs) are an effective point of use water treatment device in developing nations due to their low cost and effectiveness. CPFs are gravity fed, typically making water production a major limiting factor to a CPF's lifetime and acceptability. Directly connecting CPFs to in-line pumping systems or systems with an elevated storage tank would allow filter usage for constant water treatment at increased pressures, increasing the quantity of treated water. Ceramic disks were manufactured for testing in a specially designed housing apparatus. Filters of varying thicknesses and clay to sawdust mass ratios were manufactured to fit tightly. Flowrate and microbiological removal efficacy (logarithmic reduction value (LRV)) were determined over the testing period at various pressures. Flowrate values ranged from 2.44 to 9.04 L per hour, significantly higher than traditional CPF technology. LRVs ranged from 1.1 to 2.0, lower than traditional CPF technology but still effective at removing most Escherichia coli and total coliform bacteria. Filters proved effective at removing total and fecal coliforms at pressures less than 70 kilopascals. The optimum filter had a thickness of 3.2 cm and clay to sawdust ratio of 6:1 by mass. Filters proved to be ineffective if flowrates were above 5 L/h.

scholarly journals Point-Of-Use Drinking Water Treatment in the Developing World: Community Acceptance, Project Monitoring and Revision

2011 ◽  
Vol 6 (1) ◽  
pp. 14-32
Author(s):  
Temitope Adebimpe Ogunyoku ◽  
Daniel M. Nover ◽  
Erica R. McKenzie ◽  
Geetika Joshi ◽  
William E. Fleenor
Keyword(s):  
Water Treatment ◽  
Developing World ◽  
Drinking Water Treatment ◽  
Treatment Method ◽  
Ease Of Use ◽  
Particle Removal ◽  
Solar Disinfection ◽  
Community Acceptance ◽  
Point Of Use ◽  
One Year

Abstract - Project design and implementation of water treatment technologies in the developing world often overlooks potential pitfalls because: 1) technical experts focus on technologies without considering cultural acceptability and 2) projects lack monitoring, evaluation, and project revision. Over the past five years, Engineers Without Borders (EWB) at the UC-Davis partnered with the Rural Agency for Sustainable Development (RASD) in Nkokonjeru, Uganda, to implement sustainable point of use (POU) water systems. POU systems (i.e. Filtron clay pot filters, solar disinfection, chlorine treatment, and colloidal silver) were tested and implemented at RASD’s training center in Nkokonjeru. While all of the systems effectively removed pathogens, cultural appropriateness and education were the most important drivers of project acceptance. After a one-year assessment, it was determined that community preference was driven by transparency of treatment method, cost, stigma, and ease of use. Clay pot filters were preferred because of ease of use and physical particle removal capabilities. However, high cost, lack of local production and transportation difficulties dictated that their use was not sustainable. Biosand filters were introduced as an alternative and although originally deemed to be too complicated, they have been accepted by the community and continue to be manufactured by RASD in Nkokonjeru.

Sign in / Sign up

Export Citation Format

Share Document