DNA Micropatterning on Polycrystalline Diamond via One-Step Direct Amination

Langmuir ◽  
2006 ◽  
Vol 22 (8) ◽  
pp. 3728-3734 ◽  
Author(s):  
Guo-Jun Zhang ◽  
Kwang-Soup Song ◽  
Yusuke Nakamura ◽  
Taro Ueno ◽  
Takashi Funatsu ◽  
...  
2019 ◽  
Author(s):  
Nianshun Yang ◽  
Jean Felix Mukerabigwi ◽  
Xueying Huang ◽  
Yuyang Sun ◽  
Juanxiao Cai ◽  
...  

Abstract: The introduction of terminal amine functional group on nanodiamond (ND) surface has been proposed as the key strategy to enable further synthesis of various ND derivatives for a wide range of application including sensors and biomedicine. Nevertheless, it is still challenging to develop a successful synthesis procedure to achieve monodispersed ND-NH2 mostly due to the undesirable high agglomeration effect of ND particles and complex synthetic steps which dramatically limit their practical use. In this work, we demonstrate a facile approach to obtain the direct amination of the ND surface, through a one pot mechanochemical reaction using ball milling in the presence of NH4Cl. To obtain monodispersed ND-NH2, a straightforward process by virtue of viscosity gradient centrifugation is adopted using aqueous polyvinylpyrrolidone (PVP) and glycerol. The results show a successful synthesis of ND-NH2 as evidenced by FT-IR and ζ–potential analysis. Moreover, the aminated ND particles morphology and size distribution analysis by TEM and DLS, respectively, show that using viscosity gradient built from aqueous PVP can achieve a better separation of NDs by size. Therefore, the findings suggested that the application of mechanochemical reactions and viscosity gradient centrifugation can be used to achieve homogeneous and monodispersed functionalized NDs for further specific technical applications.


Author(s):  
Charles Agnès ◽  
Sébastien Ruffinatto ◽  
Emma Delbarre ◽  
André Roget ◽  
Jean-Charles Arnault ◽  
...  

Author(s):  
R.P. Goehner ◽  
W.T. Hatfield ◽  
Prakash Rao

Computer programs are now available in various laboratories for the indexing and simulation of transmission electron diffraction patterns. Although these programs address themselves to the solution of various aspects of the indexing and simulation process, the ultimate goal is to perform real time diffraction pattern analysis directly off of the imaging screen of the transmission electron microscope. The program to be described in this paper represents one step prior to real time analysis. It involves the combination of two programs, described in an earlier paper(l), into a single program for use on an interactive basis with a minicomputer. In our case, the minicomputer is an INTERDATA 70 equipped with a Tektronix 4010-1 graphical display terminal and hard copy unit.A simplified flow diagram of the combined program, written in Fortran IV, is shown in Figure 1. It consists of two programs INDEX and TEDP which index and simulate electron diffraction patterns respectively. The user has the option of choosing either the indexing or simulating aspects of the combined program.


Author(s):  
D.P. Malta ◽  
S.A. Willard ◽  
R.A. Rudder ◽  
G.C. Hudson ◽  
J.B. Posthill ◽  
...  

Semiconducting diamond films have the potential for use as a material in which to build active electronic devices capable of operating at high temperatures or in high radiation environments. A major goal of current device-related diamond research is to achieve a high quality epitaxial film on an inexpensive, readily available, non-native substrate. One step in the process of achieving this goal is understanding the nucleation and growth processes of diamond films on diamond substrates. Electron microscopy has already proven invaluable for assessing polycrystalline diamond films grown on nonnative surfaces.The quality of the grown diamond film depends on several factors, one of which is the quality of the diamond substrate. Substrates commercially available today have often been found to have scratched surfaces resulting from the polishing process (Fig. 1a). Electron beam-induced current (EBIC) imaging shows that electrically active sub-surface defects can be present to a large degree (Fig. 1c). Growth of homoepitaxial diamond films by rf plasma-enhanced chemical vapor deposition (PECVD) has been found to planarize the scratched substrate surface (Fig. 1b).


Author(s):  
E. F. Koch

Because of the extremely rigid lattice structure of diamond, generating new dislocations or moving existing dislocations in diamond by applying mechanical stress at ambient temperature is very difficult. Analysis of portions of diamonds deformed under bending stress at elevated temperature has shown that diamond deforms plastically under suitable conditions and that its primary slip systems are on the ﹛111﹜ planes. Plastic deformation in diamond is more commonly observed during the high temperature - high pressure sintering process used to make diamond compacts. The pressure and temperature conditions in the sintering presses are sufficiently high that many diamond grains in the sintered compact show deformed microtructures.In this report commercially available polycrystalline diamond discs for rock cutting applications were analyzed to study the deformation substructures in the diamond grains using transmission electron microscopy. An individual diamond particle can be plastically deformed in a high pressure apparatus at high temperature, but it is nearly impossible to prepare such a particle for TEM observation, since any medium in which the diamond is mounted wears away faster than the diamond during ion milling and the diamond is lost.


2006 ◽  
Vol 73 ◽  
pp. 85-96 ◽  
Author(s):  
Richard J. Reece ◽  
Laila Beynon ◽  
Stacey Holden ◽  
Amanda D. Hughes ◽  
Karine Rébora ◽  
...  

The recognition of changes in environmental conditions, and the ability to adapt to these changes, is essential for the viability of cells. There are numerous well characterized systems by which the presence or absence of an individual metabolite may be recognized by a cell. However, the recognition of a metabolite is just one step in a process that often results in changes in the expression of whole sets of genes required to respond to that metabolite. In higher eukaryotes, the signalling pathway between metabolite recognition and transcriptional control can be complex. Recent evidence from the relatively simple eukaryote yeast suggests that complex signalling pathways may be circumvented through the direct interaction between individual metabolites and regulators of RNA polymerase II-mediated transcription. Biochemical and structural analyses are beginning to unravel these elegant genetic control elements.


2010 ◽  
Vol 43 (18) ◽  
pp. 16
Author(s):  
MATTHEW R.G. TAYLOR
Keyword(s):  

2007 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
C.W. Kim ◽  
Y.H. Kim ◽  
H.G. Cha ◽  
D.K. Lee ◽  
Y.S. Kang

Sign in / Sign up

Export Citation Format

Share Document