scholarly journals An experimental approach to correct the microwave radiometer wind speed affected by the change of the brightness temperature due to the relative wind direction

2004 ◽  
Vol 31 (9) ◽  
pp. n/a-n/a ◽  
Author(s):  
Masanori Konda ◽  
Akira Shibata
2012 ◽  
Vol 93 (4) ◽  
pp. 531-541 ◽  
Author(s):  
Biao Zhang ◽  
William Perrie

We present an empirical C-band Cross-Polarization Ocean (C-2PO) model for wind retrievals from synthetic aperture radar (SAR) data collected by the RADARSAT-2 satellite. The C-2PO model relates normalized radar cross section (NRCS) in cross polarization to wind speed at 10-m height. This wind retrieval model has the characteristic that it is independent of wind direction and radar incidence angle but is quite linear with respect to wind speed. To evaluate the accuracy of the proposed model, winds with a resolution on the scale of 1 km were retrieved from a dual-polarization SAR image of Hurricane Earl on 2 September 2010, using the C-2PO model and compared with CMOD5.N, the newest available C-band geophysical model function (GMF), and validated with collocated airborne stepped-frequency microwave radiometer measurements and National Data Buoy Center data. Results suggest that for winds up to 38 m s−1, C-2PO has a bias of −0.89 m s−1 and a root-meansquare error of 3.23 m s−1 compared to CMOD5.N, which has a bias of −4.14 m s−1 and an rms difference of 6.24 m s−1. Similar results are obtained from Hurricane Ike, comparing wind retrievals from C-2PO and CMOD5.N with H*Wind data. The advantage of C-2PO over CMOD5.N and other GMFs is that it does not need any external wind direction and radar incidence angle inputs. Moreover, in the presently available quad-polarization dataset, C-2PO has the feature that the cross-polarized NRCS linearly increases even for wind speeds up to 26 m s−1 and reproduces the hurricane eye structure well, thereby providing a potential technique for hurricane observations from space.


2020 ◽  
Vol 13 (6) ◽  
pp. 3487-3506
Author(s):  
Sebastian Landwehr ◽  
Iris Thurnherr ◽  
Nicolas Cassar ◽  
Martin Gysel-Beer ◽  
Julia Schmale

Abstract. At sea, wind forcing is responsible for the formation and development of surface waves and represents an important source of near-surface turbulence. Therefore, processes related to near-surface turbulence and wave breaking, such as sea spray emission and air–sea gas exchange, are often parameterised with wind speed. Thus, shipborne wind speed measurements provide highly relevant observations. They can, however, be compromised by flow distortion due to the ship's structure and objects near the anemometer that modify the airflow, leading to a deflection of the apparent wind direction and positive or negative acceleration of the apparent wind speed. The resulting errors in the estimated true wind speed can be greatly magnified at low wind speeds. For some research ships, correction factors have been derived from computational fluid dynamic models or through direct comparison with wind speed measurements from buoys. These correction factors can, however, lose their validity due to changes in the structures near the anemometer and, thus, require frequent re-evaluation, which is costly in either computational power or ship time. Here, we evaluate if global atmospheric reanalysis data can be used to quantify the flow distortion bias in shipborne wind speed measurements. The method is tested on data from the Antarctic Circumnavigation Expedition onboard the R/V Akademik Tryoshnikov, which are compared to ERA-5 reanalysis wind speeds. We find that, depending on the relative wind direction, the relative wind speed and direction measurements are biased by −37 % to +22 % and -17∘ to +11∘ respectively. The resulting error in the true wind speed is +11.5 % on average but ranges from −4 % to +41 % (5th and 95th percentile). After applying the bias correction, the uncertainty in the true wind speed is reduced to ±5 % and depends mainly on the average accuracy of the ERA-5 data over the period of the experiment. The obvious drawback of this approach is the potential intrusion of model biases in the correction factors. We show that this problem can be somewhat mitigated when the error propagation in the true wind correction is accounted for and used to weight the observations. We discuss the potential caveats and limitations of this approach and conclude that it can be used to quantify flow distortion bias for ships that operate on a global scale. The method can also be valuable to verify computational fluid dynamic studies of airflow distortion on research vessels.


2019 ◽  
Vol 11 (16) ◽  
pp. 1876
Author(s):  
He Fang ◽  
William Perrie ◽  
Guosheng Zhang ◽  
Tao Xie ◽  
Shahid Khurshid ◽  
...  

We investigated the use of C-band RADARSAT Constellation Mission (RCM) synthetic aperture radar (SAR) for retrieval of ocean surface wind speeds by using four new channels (right circular transmit, vertical receive (RV); right circular transmit, horizontal receive (RH); right circular transmit, left circular transmit (RL); and right circular transmit, right circular receive (RR)) in compact polarimetry (CP) mode. Using 256 buoy measurements collocated with RADARSAT-2 fine beam quad-polarized scenes, RCM CP data was simulated using a “CP simulator”. Provided that the relative wind direction is known, our results demonstrate that wind speed can be retrieved from RV, RH and RL polarization channels using existing C-band model (CMOD) geophysical model function (GMF) and polarization ratio (PR) models. Simulated RR-polarized radar returns have a strong linear relationship with speed and are less sensitive to relative wind direction and incidence angle. Therefore, a model is proposed for the RR-polarized synthetic aperture radar (SAR) data. Our results show that the proposed model can provide an efficient methodology for wind speed retrieval.


2018 ◽  
Vol 35 (9) ◽  
pp. 1865-1879 ◽  
Author(s):  
Heather M. Holbach ◽  
Eric W. Uhlhorn ◽  
Mark A. Bourassa

AbstractWind and wave-breaking directions are investigated as potential sources of an asymmetry identified in off-nadir remotely sensed measurements of ocean surface brightness temperatures obtained by the Stepped Frequency Microwave Radiometer (SFMR) in high-wind conditions, including in tropical cyclones. Surface wind speed, which dynamically couples the atmosphere and ocean, can be inferred from SFMR ocean surface brightness temperature measurements using a radiative transfer model and an inversion algorithm. The accuracy of the ocean surface brightness temperature to wind speed calibration relies on accurate knowledge of the surface variables that are influencing the ocean surface brightness temperature. Previous studies have identified wind direction signals in horizontally polarized radiometer measurements in low to moderate (0–20 m s−1) wind conditions over a wide range of incidence angles. This study finds that the azimuthal asymmetry in the off-nadir SFMR brightness temperature measurements is also likely a function of wind direction and extends the results of these previous studies to high-wind conditions. The off-nadir measurements from the SFMR provide critical data for improving the understanding of the relationships between brightness temperature, surface wave–breaking direction, and surface wind vectors at various incidence angles, which is extremely useful for the development of geophysical model functions for instruments like the Hurricane Imaging Radiometer (HIRAD).


Author(s):  
M. M. Koman

The purpose of this article is to identify the wind direction and speed using the images from geostationary satellites and through application of two-dimensional wind vectors, the magnitude and direction of which corresponds to the speed and direction of cloud masses, on a satellite image. The results may be used for making a short-term forecast of dangerous weather events within the territory of Ukraine. To make the technique work, it is necessary to select cloud areas on a satellite image using the threshold method. Then, based on the brightness temperature distribution between two tracking modules (parts of an image based on which two consecutive satellite images are compared), the maximum correlation coefficient for infrared brightness temperature is to be determined. The coefficient corresponds to the movement of cloud masses and sets the beginning and end of the wind direction vector. To determine the optimum application of the  technique for the territory of Ukraine, the analysis of accuracy of tracking modules of different sizes was also performed. The analysis revealed that the accuracy of determining the wind vector direction depends on the tracking module size: the larger it is, the more accurate is the direction vector found, but given that the time interval between images is 15 minutes, the optimum algorithm to be used in Ukraine is the one with 5x5 pixel tracking module. The technique performance was also compared with the data of ICON and GFS forecast models. The results of the applied algorithm showed that the direction of air masses was more reliable than the data retrieved from the above-mentioned forecast models, because the algorithm analyzes the real-time movement of air masses while the forecast models assess the formation and movement of air masses in advance (with an interval of several hours up to dozens of hours). Numerical wind speed forecast of ICON and GFS models is more accurate, because the algorithm determines the wind speed based on the movement of cloud masses on satellite images whereas the forecast models consider several factors (pressure fields, development and subsequent evolution of cyclones, anticyclones, geographical characteristics etc.) which makes them more realistic.


2019 ◽  
Author(s):  
Sebastian Landwehr ◽  
Iris Thurnherr ◽  
Nicolas Cassar ◽  
Martin Gysel-Beer ◽  
Julia Schmale

Abstract. At sea, wind forcing is responsible for the formation and development of surface waves and represents an important source of near surface turbulence. Therefore, processes related to near surface turbulence and wave breaking, such as sea spray emission and air-sea gas exchange are often parametrised with wind speed. Shipborne wind speed measurements thus provide highly relevant observations. They can, however, be compromised by flow distortion due to the ship's structure and objects nearby the anemometer that modify the airflow, leading to a deflection of the apparent wind direction and positive or negative acceleration of the apparent wind speed. The resulting errors in the estimated true wind speed can be greatly magnified at low wind speeds. For some research ships, correction factors have been derived from computational fluid dynamic models or through direct comparison with wind speed measurements from buoys. These correction factors can, however, loose their validity due to changes of the structures nearby the anemometer and thus require frequent re-evaluation, which is costly in either computational power or ship time. Here we evaluate if global weather forecast model data can be used to quantify the flow distortion bias in shipborne wind speed measurements. The method is tested on data from the Antarctic Circumnavigation Expedition (ACE) on board the R/V Akademik Tryoshnikov, which are compared with ERA-5 reanalysis wind speeds. We find that, depending on the relative wind direction, the relative wind speed and direction measurements are biased by −37 % to +20 % and −13° to +15°, respectively. The resulting error in the true wind speed is +11 % on average but ranges from −5 % to +40 % (5th and 95th percentile). After applying the bias correction, the uncertainty in the true wind speed is reduced to 5 % and depends mainly on the average accuracy of the ERA-5 data over the period of the experiment. The obvious drawback of this approach is the potential intrusion of model bias in the correction factors. We show that this problem can be somewhat mediated when the error propagation in the true wind correction is accounted for and used to weight the observations. We discuss the potential caveats and limitations of this approach and conclude that it can be used to quantify flow distortion bias for ships that operate on a global scale. The method can also be valuable to verify Computational Fluid Dynamic studies of airflow distortion on research vessels.


2006 ◽  
Vol 62 (3) ◽  
pp. 395-404 ◽  
Author(s):  
Masanori Konda ◽  
Akira Shibata ◽  
Naoto Ebuchi ◽  
Kohei Arai

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3101
Author(s):  
Yu Wan ◽  
Zhenxiang Yi

In this paper, a novel 2.5-dimensional (2.5D) flexible wind sensor is proposed based on four differential plate capacitors. This design consists of a windward pillar, two electrode layers, and a support layer, which are all made of polydimethylsiloxane (PDMS) with different Young’s moduli. A 2 mm × 2 mm copper electrode array is located on each electrode layer, forming four parallel plate capacitors as the sensitive elements. The wind in the xy-plane tilts the windward pillar, decreasing two capacitances on the windward side and increasing two capacitances on the leeward side. The wind in the z-axis depresses the windward pillar, resulting in an increase of all four capacitances. Experiments demonstrate that this sensor can measure the wind speed up to 23.9 m/s and the wind direction over the full 360° range of the xy-plane. The sensitivities of wind speed are close to 4 fF·m−1·s and 3 fF·m−1·s in the xy-plane and z-axis, respectively.


1958 ◽  
Vol 39 (3) ◽  
pp. 129-136 ◽  
Author(s):  
C. W. Newton ◽  
Sey Katz

By means of hourly rainfall data from the Hydroclimatic Network, the motions of large rainstorms, of the kind associated with squall lines, are examined in relation to the winds aloft. Very little correlation is found between the speed of movement of the rainstorms and the wind speed at any level, although the fastest moving storms were associated with strong winds aloft. Significant correlation is found between direction of motion of rainstorms, and wind direction at 700 mb or higher levels. On the average, the rainstorms move with an appreciable component toward right of the wind direction. The difference between these results, and those from other studies based on small precipitation areas, is ascribed to propagation. The mechanism involved is discussed briefly.


2014 ◽  
Vol 14 (19) ◽  
pp. 10721-10730 ◽  
Author(s):  
L. Ran ◽  
W. L. Lin ◽  
Y. Z. Deji ◽  
B. La ◽  
P. M. Tsering ◽  
...  

Abstract. Through several years of development, the city of Lhasa has become one of the most populated and urbanized areas on the highest plateau in the world. In the process of urbanization, current and potential air quality issues have been gradually concerned. To investigate the current status of air pollution in Lhasa, various gas pollutants including NOx, CO, SO2, and O3, were continuously measured from June 2012 to May 2013 at an urban site (29.40° N, 91.08° E, 3650 m a.s.l.). The seasonal variations of primary gas pollutants exhibited a peak from November to January with a large variability. High mixing ratios of primary trace gases almost exclusively occurred under low wind speed and showed no distinct dependence on wind direction, implying local urban emissions to be predominant. A comparison of NO2, CO, and SO2 mixing ratios in summer between 1998 and 2012 indicated a significant increase in emissions of these gas pollutants and a change in their intercorrelations, as a result of a substantial growth in the demand of energy consumption using fossil fuels instead of previously widely used biomass. The pronounced diurnal double peaks of primary trace gases in all seasons suggested automobile exhaust to be a major emission source in Lhasa. The secondary gas pollutant O3 displayed an average diurnal cycle of a shallow flat peak for about 4–5 h in the afternoon and a minimum in the early morning. Nighttime O3 was sometimes completely consumed by the high level of NOx. Seasonally, the variations of O3 mixing ratios displayed a low valley in winter and a peak in spring. In autumn and winter, transport largely contributed to the observed O3 mixing ratios, given its dependence on wind speed and wind direction, while in spring and summer photochemistry played an important role. A more efficient buildup of O3 mixing ratios in the morning and a higher peak in the afternoon was found in summer 2012 than in 1998. An enhancement in O3 mixing ratios would be expected in the future and more attention should be given to O3 photochemistry in response to increasing precursor emissions in this area.


Sign in / Sign up

Export Citation Format

Share Document