scholarly journals Seamless integration of intraoral scanner

BDJ ◽  
2021 ◽  
Vol 230 (8) ◽  
pp. 550-550
2017 ◽  
Vol 2 (1) ◽  
pp. 1
Author(s):  
Amirul Amin Ismail ◽  
Ismail Samsuddin ◽  
Azman Zainonabidin ◽  
Harlina Mohd Ali

By the year 2030, Malaysian population will experience the after effects of the rapid growth of ageing society. This paper investigates the impact of seamless integration of horticultural activity in the new residential typology of retirement community. It is believed that horticultural therapy is not only beneficial for physical and psychological but also promotes socialisation opportunities among the elderly. Comparative analysis method on selected precedent studies has been carried out and analysed in accordance with Malaysian context. Initial findings indicate that a retirement community with horticultural activity gives therapy for healthier well-being. This therapeutic activity can be apositive change in elderly lifestyle and essential towards the establishment of retirement community in Malaysia. 


2020 ◽  
Vol 14 ◽  
Author(s):  
Intyaz Alam ◽  
Sushil Kumar ◽  
Pankaj Kumar Kashyap

Background: Recently, Internet of Things (IoT) has brought various changes in the existing research field by including new areas such as smart transportation, smart home facilities, smart healthcare, etc. In smart transportation systems, vehicles contain different components to access information related to passengers, drivers, vehicle speed, and many more. This information can be accessed by connecting vehicles with Internet of Things leading to new fields of research known as Internet of Vehicles. The setup of Internet of Vehicle (IoV) consists of many sensors to establish a connection with several other sensors belonging to different environments by exploiting different technologies. The communication of the sensors faces a lot of challenging issues. Some of the critical challenges are to maintain security in information exchanges among the vehicles, inequality in sensors, quality of internet connection, and storage capacity. Objective: To overcome the challenging issues, we have designed a new framework consisting of seven-layered architecture, including the security layered, which provides seamless integration by communicating the devices present in the IoV environment. Further, a network model consisting of four components such as Cloud, Fog, Connection, and Clients has been designed. Finally, the protocol stack which describes the protocol used in each layer of the proposed seven-layered IoV architecture has been shown. Methods: In this proposed architecture, the representation and the functionalities of each layer and types of security have been defined. Case studies of this seven-layer IoV architecture have also been performed to illustrate the operation of each layer in real-time. The details of the network model including all the elements inside each component, have also been shown. Results: We have discussed some of the existing communication architecture and listed a few challenges and issues occurring in present scenarios. Considering these issues, which is presently occurring in the existing communication architecture. We have developed the seven-layered IoV architecture and the network model with four essential components known as the cloud, fog, connection, and clients. Conclusion: This proposed architecture provides a secure IoV environment and provides life safety. Hence, safety and security will help to reduce the cybercrimes occurring in the network and provides good coordination and communication of the vehicles in the network.


2021 ◽  
Vol 11 (3) ◽  
pp. 1220
Author(s):  
Azeem Ul Yaqin Syed ◽  
Dinesh Rokaya ◽  
Shirin Shahrbaf ◽  
Nicolas Martin

The effect of a restored machined hybrid dental ceramic crown–tooth complex is not well understood. This study was conducted to determine the effect of the stress state of the machined hybrid dental ceramic crown using three-dimensional finite element analysis. Human premolars were prepared to receive full coverage crowns and restored with machined hybrid dental ceramic crowns using the resin cement. Then, the teeth were digitized using micro-computed tomography and the teeth were scanned with an optical intraoral scanner using an intraoral scanner. Three-dimensional digital models were generated using an interactive image processing software for the restored tooth complex. The generated models were imported into a finite element analysis software with all degrees of freedom concentrated on the outer surface of the root of the crown–tooth complex. To simulate average occlusal load subjected on a premolar a total load of 300 N was applied, 150 N at a buccal incline of the palatal cusp, and palatal incline of the buccal cusp. The von Mises stresses were calculated for the crown–tooth complex under simulated load application was determined. Three-dimensional finite element analysis showed that the stress distribution was more in the dentine and least in the cement. For the cement layer, the stresses were more concentrated on the buccal cusp tip. In dentine, stress was more on the cusp tips and coronal 1/3 of the root surface. The conventional crown preparation is a suitable option for machined polymer crowns with less stress distribution within the crown–tooth complex and can be a good aesthetic replacement in the posterior region. Enamic crowns are a good viable option in the posterior region.


Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2157
Author(s):  
Kevin Langlois ◽  
Ellen Roels ◽  
Gabriël Van De Velde ◽  
Cláudia Espadinha ◽  
Christopher Van Vlerken ◽  
...  

Sensing pressure at the physical interface between the robot and the human has important implications for wearable robots. On the one hand, monitoring pressure distribution can give valuable benefits on the aspects of comfortability and safety of such devices. Additionally, on the other hand, they can be used as a rich sensory input to high level interaction controllers. However, a problem is that the commercial availability of this technology is mostly limited to either low-cost solutions with poor performance or expensive options, limiting the possibilities for iterative designs. As an alternative, in this manuscript we present a three-dimensional (3D) printed flexible capacitive pressure sensor that allows seamless integration for wearable robotic applications. The sensors are manufactured using additive manufacturing techniques, which provides benefits in terms of versatility of design and implementation. In this study, a characterization of the 3D printed sensors in a test-bench is presented after which the sensors are integrated in an upper arm interface. A human-in-the-loop calibration of the sensors is then shown, allowing to estimate the external force and pressure distribution that is acting on the upper arm of seven human subjects while performing a dynamic task. The validation of the method is achieved by means of a collaborative robot for precise force interaction measurements. The results indicate that the proposed sensors are a potential solution for further implementation in human–robot interfaces.


Computation ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 12
Author(s):  
Evangelos Maltezos ◽  
Athanasios Douklias ◽  
Aris Dadoukis ◽  
Fay Misichroni ◽  
Lazaros Karagiannidis ◽  
...  

Situational awareness is a critical aspect of the decision-making process in emergency response and civil protection and requires the availability of up-to-date information on the current situation. In this context, the related research should not only encompass developing innovative single solutions for (real-time) data collection, but also on the aspect of transforming data into information so that the latter can be considered as a basis for action and decision making. Unmanned systems (UxV) as data acquisition platforms and autonomous or semi-autonomous measurement instruments have become attractive for many applications in emergency operations. This paper proposes a multipurpose situational awareness platform by exploiting advanced on-board processing capabilities and efficient computer vision, image processing, and machine learning techniques. The main pillars of the proposed platform are: (1) a modular architecture that exploits unmanned aerial vehicle (UAV) and terrestrial assets; (2) deployment of on-board data capturing and processing; (3) provision of geolocalized object detection and tracking events; and (4) a user-friendly operational interface for standalone deployment and seamless integration with external systems. Experimental results are provided using RGB and thermal video datasets and applying novel object detection and tracking algorithms. The results show the utility and the potential of the proposed platform, and future directions for extension and optimization are presented.


2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Yihui Quek ◽  
Stanislav Fort ◽  
Hui Khoon Ng

AbstractCurrent algorithms for quantum state tomography (QST) are costly both on the experimental front, requiring measurement of many copies of the state, and on the classical computational front, needing a long time to analyze the gathered data. Here, we introduce neural adaptive quantum state tomography (NAQT), a fast, flexible machine-learning-based algorithm for QST that adapts measurements and provides orders of magnitude faster processing while retaining state-of-the-art reconstruction accuracy. As in other adaptive QST schemes, measurement adaptation makes use of the information gathered from previous measured copies of the state to perform a targeted sensing of the next copy, maximizing the information gathered from that next copy. Our NAQT approach allows for a rapid and seamless integration of measurement adaptation and statistical inference, using a neural-network replacement of the standard Bayes’ update, to obtain the best estimate of the state. Our algorithm, which falls into the machine learning subfield of “meta-learning” (in effect “learning to learn” about quantum states), does not require any ansatz about the form of the state to be estimated. Despite this generality, it can be retrained within hours on a single laptop for a two-qubit situation, which suggests a feasible time-cost when extended to larger systems and potential speed-ups if provided with additional structure, such as a state ansatz.


Sign in / Sign up

Export Citation Format

Share Document