scholarly journals On the design and performance analysis of wristband MIMO/diversity antenna for smart wearable communication applications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Thennarasi Govindan ◽  
Sandeep Kumar Palaniswamy ◽  
Malathi Kanagasabai ◽  
Thipparaju Rama Rao ◽  
M. Gulam Nabi Alsath ◽  
...  
Keyword(s):  
Multiple Input Multiple Output ◽  
Diversity Gain ◽  
Antenna Element ◽  
Ground Structure ◽  
Capacity Loss ◽  
Multiple Input ◽  
Input Multiple Output ◽  
And Performance ◽  
Smart Wearable ◽  
Diversity Antenna

AbstractThe design of a silicone rubber-based wristband wearable antenna exploiting pattern diversity is presented in this paper. The wristband diversity antenna consists of four identical antenna elements with an inter-element spacing of 0.68λ0, where λ0 is the lower cut-off wavelength. A modified trapezoidal-shaped radiator with a rectangular ground structure is used to achieve ultra-wide bandwidth. The proposed multiple-input-multiple-output (MIMO)/diversity antenna covers a frequency range of 2.75–12 GHz. The antenna element offers a radiation efficiency of 89.3% and a gain of 3.41 dBi. The size of the wristband diversity antenna is 1.1λ0 × 18.4λ0 × 0.18λ0. The diversity performance characteristics of the prototype antenna are examined, with the envelope correlation coefficient (ECC) < 0.18, apparent diversity gain (ADG) > 9.5, effective diversity gain (EDG) > 9.5, mean effective gain (MEG) < 1 dB, total active reflection coefficient (TARC) < − 10 dB, and channel capacity loss (CCL) < 0.1  bits/s/Hz over the entire operating band. The specific absorption rate (SAR) of the proposed wristband antenna is analyzed to determine its radiation exposure on the human body, and the results show that the values are less than 0.02 W/kg.

scholarly journals 3-D twelve-port multi-service diversity antenna for automotive communications

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Lekha Kannappan ◽  
Sandeep Kumar Palaniswamy ◽  
Malathi Kanagasabai ◽  
Preetam Kumar ◽  
M. Gulam Nabi Alsath ◽  
...  
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Vertical Plane ◽  
Ultra Wideband ◽  
Diversity Gain ◽  
Antenna Element ◽  
Horizontal Polarization ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Diversity Antenna

AbstractThis paper presents a twelve-port ultra-wideband multiple-input-multiple-output (MIMO)/diversity antenna integrated with GSM and Bluetooth bands. The twelve-port antenna is constructed by arranging four elements in the horizontal plane and eight elements in the vertical plane. The antenna element, which is created using a simple rectangular monopole, exhibits a frequency range of 3.1 to 12 GHz. The additional Bluetooth and GSM bands are achieved by introducing stubs into the ground plane. The size of the MIMO antenna is 100 × 100 mm2. The antenna offers polarization diversity, with vertical and horizontal polarization in each plane. The diversity antenna has a bandwidth of 1.7–1.9 GHz, 2.35–2.55 GHz, and 3–12 GHz, the radiation efficiency of 90%, and peak gain of 2.19 dBi. The proposed antenna offers an envelope correlation coefficient of < 0.12, apparent diversity gain of > 9.9 dB, effective diversity gain of > 8.9 dB, mean effective gain of < 1 dB, and channel capacity loss of < 0.35 bits/s/Hz. Also, the MIMO antenna is tested for housing effects in order to determine its suitability for automotive applications.

scholarly journals A New CPW-Fed Diversity Antenna for MIMO 5G Smartphones

Electronics ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 261 ◽  
Author(s):  
Naser Ojaroudi Parchin ◽  
Haleh Jahanbakhsh Basherlou ◽  
Yasir I. A. Al-Yasir ◽  
Ahmed M. Abdulkhaleq ◽  
Mohammad Patwary ◽  
...  
Keyword(s):  
Coplanar Waveguide ◽  
Multiple Input Multiple Output ◽  
Antenna Design ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Good Potential ◽  
And Performance ◽  
Diversity Antenna ◽  
Better Than

In this study, a new coplanar waveguide (CPW)-fed diversity antenna design is introduced for multiple-input–multiple-output (MIMO) smartphone applications. The diversity antenna is composed of a double-fed CPW-fed antenna with a pair of modified T-ring radiators. The antenna is designed to cover the frequency spectrum of commercial sub-6 GHz 5G communication (3.4–3.8 and 3.8–4.2 GHz). It also provides high isolation, better than −16 dB, without an additional decoupling structure. It offers good potential to be deployed in future smartphones. Therefore, the characteristics and performance of an 8-port 5G smartphone antenna were investigated using four pairs of the proposed diversity antennas. Due to the compact size and also the placement of the elements, the presented CPW-fed smartphone antenna array design occupies a very small part of the smartphone board. Its operation band spans from 3.4 to 4.4 GHz. The simulated results agree well with measured results, and the performance of the smartphone antenna design in the presence of a user is given in this paper as well. The proposed MIMO design provides not only sufficient radiation coverage supporting different sides of the mainboard but also polarization diversity.

Design of an interlocked four-port MIMO antenna for UWB automotive communications

2021 ◽  
pp. 1-8
Author(s):  
M. Saravanan ◽  
R. Kalidoss ◽  
B. Partibane ◽  
K. S. Vishvaksenan
Keyword(s):  
Multiple Input Multiple Output ◽  
Performance Estimation ◽  
Ultra Wideband ◽  
Antenna Element ◽  
Frequency Range ◽  
Mimo Antenna ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Operating Bandwidth ◽  
Peak Gain

Abstract The design, analysis, fabrication, and testing of a four-port multiple-input multiple-output (MIMO) antenna is reported in this paper for automotive communications. The MIMO antenna is constructed using the basic antenna element exploiting a slot geometry. Two such antennas are developed on the same microwave laminate to develop a two-port MIMO antenna. Two such microwave laminates are interlocked to create the four-port MIMO scheme. The most distinct feature of the proposed architecture is that the inter-port isolation is well-taken care without the need for an external decoupling unit. The four-port MIMO antenna has an overall volume of 32 × 15 × 32 mm3. The prototype MIMO antenna is fabricated and the measurements are carried out to validate the simulation results. The antenna offers ultra-wideband (UWB) characteristics covering the frequency range of 2.8–9.5 GHz. The average boresight gain of the antenna ranges from 3.2 to 5.41 dBi with the peak gain at 8 GHz. The simulated efficiency of the antenna is greater than 73% within the operating bandwidth. The MIMO parameters such as envelope correlation coefficient, diversity gain, and mean effective gain are evaluated and presented. The appropriateness of the proposed antenna for deployment in the shark fin housing of the present-day automobiles is verified using on-car performance estimation.

scholarly journals DESIGN AND ANALYSIS OF COMPACT METAMATERIAL MIMO ANTENNA FOR WLAN APPLICATIONS

2019 ◽  
Vol 57 (2) ◽  
pp. 223
Author(s):  
Hoa Nguyen Thi Quynh ◽  
Sy Tuan Tran ◽  
Huu Lam Phan ◽  
Duy Tung Phan
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Split Ring Resonator ◽  
Antenna Element ◽  
Mimo Antenna ◽  
Complementary Split Ring Resonator ◽  
Antenna Performance ◽  
Multiple Input ◽  
Input Multiple Output ◽  
The Individual

A compact three-port metamaterial multiple-input-multiple-output (MIMO) antenna using complementary split-ring resonator (CSRR) loaded ground have demonstrated in order to miniaturize the size and improve the antenna performance. The antenna is designed on FR4 material and simulated by HFSS software. By loading CSRRs in the ground plane, the size reduction of 77% of the individual patch antenna element is achieved, which appeared to be the major reason for the obtained the compact MIMO antenna. Furthermore, the simulated results show that the proposed MIMO antenna achieves the total gain higher than 5 dB, the isolation less than -11 dB, the envelope correlation coefficient (ECC) value lower than 0.015, and the bandwidth of 100 MHz through the whole WLAN band from 2.4 GHz to 2.484 GHz, indicating promises for WLAN applications.

scholarly journals Channel capacity and performance evaluation of precoded MIMO-OFDM system with large-size constellation

2019 ◽  
Vol 9 (6) ◽  
pp. 5024
Author(s):  
Hussein A. Leftah ◽  
Huda N. Alminshid
Keyword(s):  
Fading Channels ◽  
Channel Capacity ◽  
Orthogonal Frequency Division Multiplexing ◽  
Multiple Input Multiple Output ◽  
Ofdm System ◽  
Large Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Mimo Ofdm ◽  
And Performance

<p>Multiple input-multiple output (MIMO) is a multipath diversity exploring approach which is emerged with orthogonal frequency division multiplexing (OFDM) to produce MIMO-OFDM that is widely used in wireless communications. This paper presents a discrete Hart-ley transform (DHT) precoded MIMO-OFDM system over multipath frequency-selective fading channel with large-size quadrature amplitude modulation (16-QAM, 64-QAM and 256-QAM). A mathematical models for the BER and channel capacity over mutlipath fading channels are also derived in this paper. Average Bit-error-rate (BER) and channel capacity of the presented system is considered and compared with that of the traditional MIMO-OFDM. Simulation results shows that the transmission performance and channel capacity of the proposed schemes is better than that of the traditional MIMO-OFDM without a pre-coder.</p>

scholarly journals Dual-Band 2 × 2 MIMO Antenna with Compact Size and High Isolation Based on Half-Mode SIW

2020 ◽  
Vol 2020 ◽  
pp. 1-11
Author(s):  
Abubaker Ahmed Elobied ◽  
Xue-Xia Yang ◽  
Ningjie Xie ◽  
Steven Gao
Keyword(s):  
Multiple Input Multiple Output ◽  
Dual Band ◽  
Antenna Element ◽  
Mimo Antenna ◽  
High Isolation ◽  
Rectangular Patch ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Proximity Coupling

This paper presents a close-spaced dual-band 2 × 2 multiple-input multiple-output (MIMO) antenna with high isolation based on half-mode substrate integrated waveguide (HMSIW). The dual-band operation of the antenna element is achieved by loading a rectangular patch outside the radiating aperture of an HMSIW cavity. The HMSIW cavity is excited by a coaxial probe, whereas the rectangular patch is energized through proximity coupling by the radiating aperture of HMSIW. The antenna elements can be closely placed using the rotation and orthogonal arrangement for a 2 × 2 array. Small neutralization lines at the center of the MIMO antenna can increase the isolation among its elements by around 10 dB in the lower band and 5 dB in the higher band. A prototype of the MIMO antenna is fabricated and its performance is measured. The measured results show that the resonant frequencies are centered at 4.43 and 5.39 GHz with bandwidths of 110 and 80 MHz and peak gains of 6 and 6.4 dBi, respectively. The minimum isolation in both bands is greater than 35 dB. The envelope correlation coefficient is lower than 0.005 within two operating bands.

Design of a wearable MIMO antenna deployed with an inverted U-shaped ground stub for diversity performance enhancement

2020 ◽  
pp. 1-11
Author(s):  
Anupma Gupta ◽  
Ankush Kansal ◽  
Paras Chawla
Keyword(s):  
Performance Enhancement ◽  
Multiple Input Multiple Output ◽  
The Body ◽  
Structural Deformation ◽  
Mimo Antenna ◽  
Tissue Phantom ◽  
Capacity Loss ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Broadside Radiation

Abstract A compact multiple input multiple output (MIMO) antenna operating at 2.45 GHz industrial scientific and medical band is presented for wearable devices. Open-end slotting is used to miniaturize the antenna dimensions. Inverted U-shaped ground stub is incorporated to reduce mutual coupling. On-body performance is analyzed on a three-layered equivalent tissue phantom model. The wide bandwidth of 300 MHz and port isolation of 30 dB are obtained from measured results. The antenna shows the efficiency of 40% and directivity of 4.56 dBi when placed at a gap of “s” = 4 mm from the body. Broadside radiation pattern and low specific absorption rate make the antenna suitable for on-body communication. Further, diversity performance is measured in terms of envelope correlation coefficient (ECC), diversity gain (DG), and channel capacity loss (CCL). The value of ECC is 0.025, DG is 9.98 dB, and CCL is 0.12 bits/s/Hz at 2.45 GHz. Antenna robustness is examined by bending the structure at different radii along the x-axis and y-axis. Performance of the proposed structure is reliable with structural deformation.

UWB MIMO antenna with common radiator

2016 ◽  
Vol 9 (3) ◽  
pp. 573-580 ◽  
Author(s):  
Garima Srivastava ◽  
B. K. Kanuijia ◽  
Rajeev Paulus
Keyword(s):  
Low Cost ◽  
Multiple Input Multiple Output ◽  
Impedance Bandwidth ◽  
Rectangular Slot ◽  
Mimo Antenna ◽  
Circular Patch ◽  
Capacity Loss ◽  
Compact Size ◽  
Multiple Input ◽  
Input Multiple Output

A compact printed 2 × 2 ultrawideband (UWB) multiple input multiple output (MIMO) antenna with a single circular patch as a common radiator for both the antenna elements is presented in this paper. A single circular patch is excited by two tapered CPW feeds for dual polarization. To improve the isolation between two ports, a rectangular slot of dimension L1 × W1 is created in the radiator. The UWB MIMO antenna has impedance bandwidth of 3–12 GHz with a isolation better than 17 dB between the two ports. The envelope correlation coefficient and the capacity loss are evaluated to ensure the good diversity performance of UWB MIMO antenna. The antenna has a compact size of 45 × 45 mm2 and is fabricated on low cost FR4 substrate and measured using Agilent VNA. The simulated and measured results show that the proposed UWB antenna is good candidate for UWB MIMO applications.

scholarly journals Partial Nulling Regularized Block Diagonalization Using Unfair Channel Selection for Post-Coding with Low-Complexity

2020 ◽  
Vol 10 (19) ◽  
pp. 6809
Author(s):  
Hyun-Sun Hwang ◽  
Jae-Hyun Ro ◽  
Young-Hwan You ◽  
Duckdong Hwang ◽  
Hyoung-Kyu Song
Keyword(s):  
Performance Enhancement ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Diversity Gain ◽  
Block Diagonalization ◽  
Time Diversity ◽  
Multiple Input ◽  
Input Multiple Output ◽  
User Interference

A number of requirements for 5G mobile communication are satisfied by adopting multi-user multiple input multiple output (MU-MIMO) systems. The inter user interference (IUI) which is an inevitable problem in MU-MIMO systems becomes controllable when the precoding scheme is used. The proposed scheme, which is one of the precoding schemes, is built on regularized block diagonalization (RBD) precoding and utilizes the partial nulling concept, which is to leave part of the IUI at the same time. Diversity gain is obtained by leaving IUI, which is made by choosing the row vectors of the channel matrix that are not nullified. Since the criterion for choosing the row vectors of the channel is the power of the channel, the number of selected row vectors of the channel for each device can be unfair. The proposed scheme achieves performance enhancement by obtaining diversity gain. Therefore, the bit error rate (BER) performance is better and the computational complexity is lower than RBD when the same data rate is achieved. When the number of reduced data streams is not enough for most devices to achieve diversity gain, the proposed scheme has better performance compared to generalized block diagonalization (GBD). The low complexity at the receiver is achieved compared to GBD by using the simple way to remove IUI.

Sign in / Sign up

Export Citation Format

Share Document