scholarly journals Green synthesis and characterization of Fe3O4 nanoparticles using Chlorella-K01 extract for potential enhancement of plant growth stimulating and antifungal activity

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Theint Theint Win ◽  
Sikandar Khan ◽  
Bo Bo ◽  
Shah Zada ◽  
PengCheng Fu
Keyword(s):  
Electron Microscopy ◽  
Antifungal Activity ◽  
Plant Growth ◽  
Photoelectron Spectroscopy ◽  
Average Diameter ◽  
Synthesis And Characterization ◽  
Ferrous Chloride ◽  
Synthetic Process ◽  
X Ray

AbstractThe purpose of this research was to determine the efficacy of iron oxide nanoparticles (Fe3O4-NPs) using microalgal products as a plant growth stimulant and antifungal agent. The work was conducted with the phyco-synthesis and characterization of Fe3O4-NPs using 0.1 M ferric/ferrous chloride solution (2:1 ratio; 65 °C) with aqueous extract of the green microalga Chlorella K01. Protein, carbohydrate and polyphenol contents of Chlorella K01 extract were measured. The synthesized microalgal Fe3O4-NPs made a significant contribution to the germination and vigor index of rice, maize, mustard, green grams, and watermelons. Fe3O4-NPs also exhibited antifungal activity against Fusarium oxysporum, Fusarium tricinctum, Fusarium maniliforme, Rhizoctonia solani, and Phythium sp. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) scanning electron microscopy (SEM), transmission electron microscopy (TEM), particle size analysers (PSA), and zeta potential (ZP) measurements were used to characterize these green fabricated magnetite NPs. FTIR analysis showed that the synergy of microalgal proteins, carbohydrtates and polyphenols is responsible for the biofabrication of iron nanoparticles. A spheroid dispersion of biosynthesized Fe3O4-NPs with an average diameter of 76.5 nm was produced in the synthetic process.

Synthesis and characterization of homogeneous lead-substituted tin oxide with the (110) face of rutile structure

2000 ◽  
Vol 15 (10) ◽  
pp. 2076-2079
Author(s):  
Chika Nozaki ◽  
Takashi Yamada ◽  
Kenji Tabata ◽  
Eiji Suzuki
Keyword(s):  
Electron Microscopy ◽  
Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Rutile Structure ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Synthesis of a rutile-type lead-substituted tin oxide with (110) face was investigated. The characterization was performed by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive x-ray spectroscopy, infrared spectroscopy, x-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller surface area measurements. The homogeneous rutile-type lead-substituted tin oxide was obtained until 4.1 mol% of tin was substituted with lead. The surface of obtained oxide had a homogeneously lead-substituted (110) face.

Synthesis and Characterization of Flower-Like Hematite Nanostructures

2011 ◽  
Vol 287-290 ◽  
pp. 169-172
Author(s):  
Hong Wang ◽  
Xi Yang He ◽  
Ying Wang
Keyword(s):  
Electron Microscopy ◽  
Average Length ◽  
Critical Role ◽  
Average Diameter ◽  
Synthesis And Characterization ◽  
Hydrothermal Route ◽  
X Ray ◽  
Scanning Electron

The flower-like α-Fe2O3superstructures were fabricated by a novel hydrothermal route and sequential annealing at 600 °C for 1 h using FeCl3×6H2O as the starting precursor. The structures and morphologies of the synthesized flower-like superstructures have been characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM). It is revealed that the flower-like α-Fe2O3nanostructures consist of nanorods with the average diameter of about 70 nm and an average length of about 200nm growing from the centers. The critical role of urea in the hydrothermal synthesis of the flower-like nanostructures is discussed.

scholarly journals The Synthesis and Characterization of Novel Bi-/Trimetallic Nanoparticles and Their Nanocomposite Membranes for Envisaged Water Treatment

Membranes ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 232
Author(s):  
Lwazi Ndlwana ◽  
Keneiloe Sikhwivhilu ◽  
Richard Motlhaletsi Moutloali ◽  
Jane Catherine Ngila
Keyword(s):  
Electron Microscopy ◽  
Water Treatment ◽  
Photoelectron Spectroscopy ◽  
Pure Water ◽  
Synthesis And Characterization ◽  
Nanocomposite Membranes ◽  
X Ray ◽  
Water Permeation ◽  
The Impact

The impact of worldwide water scarcity, further exacerbated by environmental pollution, necessitates the development of effective water treatment membranes. Herein, we report the synthesis and characterization of nanocomposite membranes containing hyperbranched polyethyleneimine (HPEI) stabilized bi-and trimetallic nanoparticles. These membranes were prepared by blending a pre-grafted Polyethersulfone (PES) powder with the Pd@Fe@HPEI and Pd@FeAg@HPEI nanoparticles followed by phase inversion. The membranes, together with stabilized nanoparticles, were characterized by several analytical techniques, such as attenuated total reflectance–Fourier transform infra-red spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffractometry (XRD), optical contact angle (OCA), scanning electron microscopy (SEM), atomic force microscopy (AFM), and high-resolution transmission electron microscopy (HRTEM). These techniques revealed the elemental composition, zerovalent nature of the nanoparticles, and their small and even size distribution. Surface analysis showed chemical bonding between the polymeric functional groups and the supported nanoparticles. Furthermore, the nanocomposite membranes were found to be hydrophilic. Additionally, the membranes were investigated for swelling (water uptake), porosity, pore size, pure water permeation fluxes, and they indicated a decreased protein adhesion property. As such, the membranes fabricated in this work indicate the required properties for application in water treatment.

scholarly journals Synthesis and characterization of Fe, Co, and Ni colloids in 2-mercaptoethanol

2020 ◽  
Vol 10 ◽  
pp. 184798042096688
Author(s):  
Galo Cárdenas-Triviño ◽  
Sergio Triviño-Matus
Keyword(s):  
Electron Microscopy ◽  
Electron Diffraction ◽  
Colloidal Dispersions ◽  
Synthesis And Characterization ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Chemical Liquid Deposition ◽  
Liquid Deposition

Metal colloids in 2-mercaptoethanol using nanoparticles (NPs) of iron (Fe), cobalt (Co), and nickel (Ni) were prepared by chemical liquid deposition method. Transmission electron microscopy, electron diffraction, UV-VIS spectroscopy, and scanning electron microscopy with electron dispersive X-ray spectroscopy characterized the resulting colloidal dispersions. The NPs exhibited sizes with ranges from 9.8 nm for Fe, 3.7 nm for Co, and 7.2 nm for Ni. The electron diffraction shows the presence of the metals in its elemental state Fe (0), Co (0), and Ni (0) and also some compounds FeO (OH), CoCo2S4, and NiNi2S4.

Characterization of columns grown during KrF laser micromachining of Al2O3–TiC ceramics

2003 ◽  
Vol 18 (5) ◽  
pp. 1123-1130 ◽  
Author(s):  
V. Oliveira ◽  
R. Vilar
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Laser Pulses ◽  
Formation Mechanisms ◽  
X Ray ◽  
Reducing Conditions ◽  
Transmission Electron ◽  
Column Formation ◽  
Krf Laser

This paper aims to contribute to the understanding of column formation mechanisms in Al2O3–TiC ceramics micromachined using excimer lasers. Chemical and structural characterization of columns grown in Al2O3–TiC composite processed with 200 KrF laser pulses at 10 J/cm2 was carried out by scanning electron microscopy, transmission electron microscopy, x-ray photoelectron spectroscopy, and x-ray diffraction analysis. Fully developed columns consist of a core of unprocessed material surrounded by an outer layer of Al2TiO5, formed in oxidizing conditions, and an inner layer, formed in reducing conditions, composed of TiC and Al3Ti or an AlTi solid solution. Possible mechanisms of column formation are discussed.

Hydrothermal Synthesis and Characterization of BiFeO3 Polyhedral Crystallites

2012 ◽  
Vol 174-177 ◽  
pp. 508-511
Author(s):  
Lin Lin Yang ◽  
Yong Gang Wang ◽  
Yu Jiang Wang ◽  
Xiao Feng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

BiFeO3 polyhedrons had been successfully synthesized via a hydrothermal method. The as-prepared products were characterized by power X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The possible mechanisms for the formation of BiFeO3 polyhedrons were discussed. Though comparison experiments, it was found that the kind of precursor played a key role on the morphology control of BiFeO3 crystals.

Characterization of Al65.0Cu32.9Co2.1 Alloy Containing Nanofibres

2012 ◽  
Vol 186 ◽  
pp. 212-215
Author(s):  
Jacek Krawczyk ◽  
Włodzimierz Bogdanowicz ◽  
Grzegorz Dercz ◽  
Wojciech Gurdziel
Keyword(s):  
Electron Microscopy ◽  
Average Diameter ◽  
Chemical Compositions ◽  
X Ray ◽  
Transmission Electron ◽  
Orthogonal Set ◽  
T Phase ◽  
Terminal Area ◽  
Scanning Electron

Microstructure of terminal area of Al65Cu32.9Co2.1ingots (numbers indicate at.%), obtained via directional solidification was studied. Scanning Electron Microscopy, Transmission Electron Microscopy and X-ray powder diffraction were applied. Point microanalysis by Scanning Electron Microscope was used for examination of chemical compositions of alloy phases. It was found that tetragonal θ phase of Al2Cu stoichiometric formula was the dominate phase (matrix). Additionally the alloy contained orthogonal set of nanofibres of Al7Cu2Co T phase with the average diameter of 50-500 nm and oval areas of hexagonal Al3(Cu,Co)2H-phase, surrounded by monoclinic AlCu η1phase rim. Inside some areas of H-phase cores of decagonal quasicrystalline D phase were observed.

scholarly journals Synthesis and characterization of apatite silicated powders with wet precipitation method

2021 ◽  
Vol 234 ◽  
pp. 00106
Author(s):  
Houda Labjar ◽  
Hassan Chaair
Keyword(s):  
Electron Microscopy ◽  
Heat Treatment ◽  
Analytical Techniques ◽  
Precipitation Method ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Wet Precipitation ◽  
Scanning Electron

The synthesis of apatite silicated Ca10(PO4)6-x(SiO4)x(OH)2-x (SiHA) with 0≤x≤2 was investigated using a wet precipitation method followed by heat treatment using calcium carbonate CaCO3 and phosphoric acid H3PO4 and silicon tetraacetate SiC8H20O4 (TEOS) in medium of water ethanol, with three different silicate concentrations. After drying, the samples are ground and then characterized by different analytical techniques like X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Scanning electron Microscopy (SEM) and chemical analysis.

Characterization of Fe–Ni(C) nanocapsules synthesized by arc discharge in methane

1999 ◽  
Vol 14 (5) ◽  
pp. 1782-1790 ◽  
Author(s):  
X. L. Dong ◽  
Z. D. Zhang ◽  
S. R. Jin ◽  
W. M. Sun ◽  
X. G. Zhao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Arc Discharge ◽  
Carbon Layer ◽  
Magnetization Measurement ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Energy Disperse Spectroscopy

Ultrafine Fe–Ni(C) particles of various compositions were prepared by arc discharge synthesis in a methane atmosphere. The particles were characterized by x-ray diffraction, transmission electron microscopy, energy disperse spectroscopy, chemical analysis, x-ray photoelectron spectroscopy, Mössbauer spectroscopy, and magnetization measurement. The carbon atoms solubilizing at interstitial sites in γ–(Fe, Ni, C) solution particles have the effects of forming austenite structure and changing microstructures as well as magnetic properties. A carbon layer covers the surface of Fe–Ni(C) particles to form the nanocapsules and protect them from oxidization. The mechanism of forming Fe–Ni(C) nanocapsules in the methane atmosphere was analyzed.

Study on Synthesis and Characterization of AgCl Microparticle Materials Based on One-Step Solution Phase Route

2012 ◽  
Vol 568 ◽  
pp. 295-298
Author(s):  
Juan Liao ◽  
Kai Zhang ◽  
Wen Zhong Wang ◽  
Yong Gang Wang ◽  
Li Yu
Keyword(s):  
Reaction Times ◽  
Average Diameter ◽  
Solution Phase ◽  
Synthesis And Characterization ◽  
Sem Images ◽  
X Ray ◽  
Potential Applications ◽  
One Step ◽  
Size And Morphology

AgCl microparticle materials, with novel heart-like morphology, were successfully prepared by means of a simple solution phase route, in which a small amount of hydrochloric acid, ethylene and PVP were introduced to the conventional polyol process. The obtained microparticle materials were characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), and UV-Vis absorption spectrum. SEM images show that the obtained AgCl microparticle materials have heart-like morphology with an average diameter of 3 um. The influence of different reaction times on size and morphology of the microparticle materials were also investigated. A possible growth mechanism of AgCl microparticle materials has been proposed on the basis of experimental results and analysis. The as-prepared AgCl microparticle materials would find possible potential applications in photocatalytic fields.

Sign in / Sign up

Export Citation Format

Share Document