scholarly journals Effect of L-shaped heat source and magnetic field on heat transfer and irreversibilities in nanofluid-filled oblique complex enclosure

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Xiao-Hong Zhang ◽  
Tareq Saeed ◽  
Ebrahem A. Algehyne ◽  
M. A. El-Shorbagy ◽  
Adel M. El-Refaey ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Low Temperature ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Weak Magnetic Field ◽  
Radiation Heat Transfer ◽  
Bejan Number ◽  
Radiation Heat

AbstractIn this paper, the natural convection heat transfer of water/alumina nanofluid is investigated in a closed square cavity. An oblique magnetic field is applied on the cavity of angle $$\gamma$$ γ . There is also radiation heat transfer in the cavity. The cavity includes a high-temperature source of L-shape. A low-temperature source as a quadrant of a circle is placed at the corner of the cavity. All other walls are well insulated. The novelty of this work is a low-temperature obstacle embedded in the cavity. Simulations are conducted with a Fortran code based on the control volume method and simple algorithm. Entropy generation rate, Bejan number, and heat transfer are studied by changing different parameters. Results indicate that the highest rates of heat transfer and entropy generation have occurred for the perpendicular magnetic field at high values of the Rayleigh number. At these Rayleigh numbers, the minimum value of the Bejan number is obtained for 15° magnetic field. The magnetic field variation can lead to a change up to 53% in Nusselt number and up to 34% in generated entropy. In a weak magnetic field, the involvement of the radiation heat transfer mechanism leads to an increase in the heat transfer rate so that the Nusselt number can be increased by ten units considering the radiation heat transfer when there is no magnetic field. The maximum heat transfer rate occurs in the horizontal cavity and the minimum value in the cavity of 60° angle. For water, these values are 10.75 and 9.98 for 0 and 60 angles, respectively. Moreover, a weak magnetic field increases the heat transfer rate in the absence of the radiation mechanism, while it is reduced by considering a strong magnetic field.

scholarly journals Numerical Study of Entropy Generation due to Coupled Laminar and Turbulent Mixed Convection and Thermal Radiation in an Enclosure Filled with a Semitransparent Medium

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
M. Goodarzi ◽  
M. R. Safaei ◽  
Hakan F. Oztop ◽  
A. Karimipour ◽  
E. Sadeghinezhad ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Turbulent Flow ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Numerical Study ◽  
Radiation Heat Transfer ◽  
Radiation Heat ◽  
Semitransparent Medium

The effect of radiation on laminar and turbulent mixed convection heat transfer of a semitransparent medium in a square enclosure was studied numerically using the Finite Volume Method. A structured mesh and the SIMPLE algorithm were utilized to model the governing equations. Turbulence and radiation were modeled with the RNGk-εmodel and Discrete Ordinates (DO) model, respectively. For Richardson numbers ranging from 0.1 to 10, simulations were performed for Rayleigh numbers in laminar flow (104) and turbulent flow (108). The model predictions were validated against previous numerical studies and good agreement was observed. The simulated results indicate that for laminar and turbulent motion states, computing the radiation heat transfer significantly enhanced the Nusselt number (Nu) as well as the heat transfer coefficient. Higher Richardson numbers did not noticeably affect the average Nusselt number and corresponding heat transfer rate. Besides, as expected, the heat transfer rate for the turbulent flow regime surpassed that in the laminar regime. The simulations additionally demonstrated that for a constant Richardson number, computing the radiation heat transfer majorly affected the heat transfer structure in the enclosure; however, its impact on the fluid flow structure was negligible.

scholarly journals Free Convection of Hybrid Nanofluids in a C-Shaped Chamber under Variable Heat Flux and Magnetic Field: Simulation, Sensitivity Analysis, and Artificial Neural Networks

Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2807 ◽  
Author(s):  
Hamed Bagheri ◽  
Mohammadali Behrang ◽  
Ehsanolah Assareh ◽  
Mohsen Izadi ◽  
Mikhail A. Sheremet
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Aspect Ratio ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Pso Algorithm ◽  
Ann Model

In the present investigation, the free convection energy transport was studied in a C-shaped tilted chamber with the inclination angle α that was filled with the MWCNT (MultiWall Carbon Nanotubes)-Fe3O4-H2O hybrid nanofluid and it is affected by the magnetic field and thermal flux. The control equations were numerically resolved by the finite element method (FEM). Then, using the artificial neural network (ANN) combined with the particles swarm optimization algorithm (PSO), the Nusselt number was predicted, followed by investigating the effect of parameters including the Rayleigh number (Ra), the Hartmann number (Ha), the nanoparticles concentration (φ), the inclination angle of the chamber (α), and the aspect ratio (AR) on the heat transfer rate. The results showed the high accuracy of the ANN optimized by the PSO algorithm in the prediction of the Nusselt number such that the mean squared error in the ANN model is 0.35, while in the ANN model, it was optimized using the PSO algorithm (ANN-PSO) is 0.22, suggesting the higher accuracy of the latter. It was also found that, among the studied parameters with an effect on the heat transfer rate, the Rayleigh number and aspect ratio have the greatest impact on the thermal transmission intensification. The obtained data also showed that a growth of the Hartmann number illustrates a reduction of the Nusselt number for high Rayleigh numbers and the heat transfer rate is almost constant for low Rayleigh number values.

Effect of magnetic field-dependent thermal conductivity on natural convection of magnetic nanofluid inside a square enclosure

2019 ◽  
Vol 29 (4) ◽  
pp. 1466-1489 ◽  
Author(s):  
Mohammadhossein Hajiyan ◽  
Shohel Mahmud ◽  
Mohammad Biglarbegian ◽  
Hussein A. Abdullah ◽  
A. Chamkha
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Thermal Conductivity ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Hartmann Number ◽  
Magnetic Nanofluid ◽  
Content Type ◽  
Square Enclosure ◽  
Field Dependent

Purpose The purpose of this paper is to investigate the convective heat transfer of magnetic nanofluid (MNF) inside a square enclosure under uniform magnetic fields considering nonlinearity of magnetic field-dependent thermal conductivity. Design/methodology/approach The properties of the MNF (Fe3O4+kerosene) were described by polynomial functions of magnetic field-dependent thermal conductivity. The effect of the transverse magnetic field (0 < H < 105), Hartmann Number (0 < Ha < 60), Rayleigh number (10 <Ra <105) and the solid volume fraction (0 < φ < 4.7%) on the heat transfer performance inside the enclosed space was examined. Continuity, momentum and energy equations were solved using the finite element method. Findings The results show that the Nusselt number increases when the Rayleigh number increases. In contrast, the convective heat transfer rate decreases when the Hartmann number increases due to the strong magnetic field which suppresses the buoyancy force. Also, a significant improvement in the heat transfer rate is observed when the magnetic field is applied and φ = 4.7% (I = 11.90%, I = 16.73%, I = 10.07% and I = 12.70%). Research limitations/implications The present numerical study was carried out for a steady, laminar and two-dimensional flow inside the square enclosure. Also, properties of the MNF are assumed to be constant (except thermal conductivity) under magnetic field. Practical implications The results can be used in thermal storage and cooling of electronic devices such as lithium-ion batteries during charging and discharging processes. Originality/value The accuracy of results and heat transfer enhancement having magnetic field-field-dependent thermal conductivity are noticeable. The results can be used for different applications to improve the heat transfer rate and enhance the efficiency of a system.

Heat Transfer Investigation of a Tube Partially Wrapped by Metal Porous Layer as a Potential Novel Tube for Air Cooled Heat Exchangers

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
M. Mohammadpour-Ghadikolaie ◽  
M. Saffar-Avval ◽  
Z. Mansoori ◽  
N. Alvandifar ◽  
N. Rahmati
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Heat Transfer Rate ◽  
Porous Layer ◽  
Transfer Rate ◽  
Metal Foam ◽  
Convection Heat Transfer ◽  
Darcy Number ◽  
High Heat Transfer

Laminar forced convection heat transfer from a constant temperature tube wrapped fully or partially by a metal porous layer and subjected to a uniform air cross-flow is studied numerically. The main aim of this study is to consider the thermal performance of some innovative arrangements in which only certain parts of the tube are covered by metal foam. The combination of Navier–Stokes and Darcy–Brinkman–Forchheimer equations is applied to evaluate the flow field. Governing equations are solved using the finite volume SIMPLEC algorithm and the effects of key parameters such as Reynolds number, metal foam thermophysical properties, and porous layer thickness on the Nusselt number are investigated. The results show that using a tube which is fully wrapped by an external porous layer with high thermal conductivity, high Darcy number, and low drag coefficient, can provide a high heat transfer rate in the high Reynolds number laminar flow, increasing the Nusselt number almost as high as 16 times compared to a bare tube. The most important result of thisstudy is that by using some novel arrangements in which the tube is partially covered by the foam layer, the heat transfer rate can be increased at least 20% in comparison to the fully wrapped tube, while the weight and material usage can be considerably reduced.

Effect of a Magnetic Field on the Heat Transfer Rate on Free Convection in a Rectangular Cavity

2005 ◽  
Author(s):  
Gustavo Gutierrez ◽  
Ezequiel Medici
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Natural Convection ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Stokes Equations ◽  
Rectangular Cavity ◽  
Convection Flow ◽  
Interesting Phenomenon ◽  
The Magnetic Field

The interaction between magnetic fields and convection is an interesting phenomenon because of its many important engineering applications. Due to natural convection motion the electric conductive fluid in a magnetic field experiences a Lorenz force and its effect is usually to reduce the flow velocities. A magnetic field can be used to control the flow field and increase or reduce the heat transfer rate. In this paper, the effect of a magnetic field in a natural convection flow of an electrically conducting fluid in a rectangular cavity is studied numerically. The two side walls of the cavity are maintained at two different constant temperatures while the upper wall and the lower wall are completely insulated. The coupling of the Navier-Stokes equations with the Maxwell equations is discussed with the assumptions and main simplifications assumed in typical problems of magnetohydrodynamics. The nonlinear Lorenz force generates a rich variety of flow patterns depending on the values of the Grashof and Hartmann numbers. Numerical simulations are carried out for different Grashof and Hartmann numbers. The effect of the magnetic field on the Nusselt number is discussed as well as how convection can be suppressed for certain values of the Hartmann number under appropriate direction of the magnetic field.

Boiling heat transfer characteristics of binary magnetic fluid flow in a vertical circular pipe with a partly heated region

2004 ◽  
Vol 218 (2) ◽  
pp. 223-232 ◽  
Author(s):  
S Shuchi ◽  
K Sakatani ◽  
H Yamaguchi
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Boiling Heat Transfer ◽  
Transfer Rate ◽  
Heated Region ◽  
Heat Transfer Characteristics ◽  
Transfer Characteristics ◽  
The Magnetic Field

An investigation was conducted for heat transfer characteristics of binary magnetic fluid flow in a partly heated circular pipe experimentally. The boiling heat transfer characteristics on the effects of the relative position of the magnetic field to the heated region were particularly considered in the present study. From the experimental verification, the Nusselt number, representing boiling heat transfer characteristics, was obtained for various flow and magnetic conditions which were represented by the non-dimensional parameters of the Reynolds number and the magnetic pressure number. Additionally, the rate of change of the Nusselt number found by applying the magnetic field was also estimated and the optimal position of the field to the partly heated region was discussed. The results indicated that the effect of the magnetic field to the heat transfer rate from the heated wall was mainly subjected to the effect of the vortices induced in the magnetic field region and the possibility of controlling the heat transfer rate by applying an outer magnetic field to utilize the effect.

Numerical Thermal Analysis of a Hot Non-circular Rotating Cylinder in the Presence of a Magnetic Field

2021 ◽  
Author(s):  
Hojjat Khozeymeh-Nezhad ◽  
Yaser Basati ◽  
Hamid Niazmand
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Circular Cylinder ◽  
Transfer Rate ◽  
Elliptic Cylinder ◽  
Optimal Location ◽  
Elliptical Cylinder ◽  
Square Enclosure ◽  
Cylinder Rotation

Abstract In the present paper for the first time, a Lattice Boltzmann Simulation is performed to analyze the simultaneous effects of a hot rotating elliptic cylinder and the magnetic field on the mixed convection flow in a square enclosure. Complicated flow patterns and isotherms plots are found and analyzed in the concentric annulus between the internal elliptic cylinder and the outer square enclosure. Results indicate that increasing the Reynolds number, instantaneous averaged Nusselt number of the enclosure and its oscillation amplitude increase, while decrease with increasing the Hartmann number especially at its lower values. Furthermore, response surface method is adopted to find the optimal location of the elliptic cylinder. Response surface optimization results reveal that the average Nusselt number shows a decreasing-increasing trend with increasing both non-dimensional parameters of cylinder center (Xc,Yc) Finally, the optimal location of the elliptic cylinder for the maximum heat transfer rate is obtained as Xc=0.65 and Yc=0.35. Moreover, a comparative study is performed to evaluate the heat transfer effects of the elliptical cylinder rotation as compared to circular cylinder. It was found that the elliptical cylinder rotation has a significant effect on the heat transfer enhancement, especially at high values of Re and Ha. As an example, the heat transfer rate for the elliptical cylinder at Re=200 is increased by 13 % and 34% as compared to the circular cylinder at Ha=50 and 100, respectively.

Sign in / Sign up

Export Citation Format

Share Document