One-pot fabrication of nanoporous polymer decorated materials: from oil-collecting devices to high-efficiency emulsion separation

2017 ◽  
Vol 5 (10) ◽  
pp. 5077-5087 ◽  
Author(s):  
Yong Li ◽  
Zhaozhu Zhang ◽  
Mengke Wang ◽  
Xuehu Men ◽  
Qunji Xue
Keyword(s):  
Oil Content ◽  
High Efficiency ◽  
Environmentally Friendly ◽  
Porous Polymer ◽  
One Pot ◽  
Emulsion Separation ◽  
Oil Water

Environmentally friendly porous polymer decorated materials can rapidly separate complex oil–water mixtures including surfactant-stabilized emulsions and collect the oil content simultaneously.

Anti-fouling graphene oxide based nanocomposites membrane for oil-water emulsion separation

2017 ◽  
Vol 77 (5) ◽  
pp. 1179-1185 ◽  
Author(s):  
Yang Feng ◽  
Zhiwen Wang ◽  
Ruixue Zhang ◽  
Yuanyuan Lu ◽  
Yuqing Huang ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Membrane Fouling ◽  
Self Assembly ◽  
High Efficiency ◽  
Rejection Rate ◽  
Contact Angles ◽  
Water Contact ◽  
Water Emulsion ◽  
Emulsion Separation ◽  
Oil Water

Abstract Anti-fouling copper hydroxide nanowires (CHNs)-graphene oxide (GO) nanocomposites membrane was fabricated by a vacuum-assisted filtration self-assembly process. CHNs were covered on the surface and inserted into the interlayers of the GO nanosheets to form the rough surface and nanostructure channels. The membrane with water contact angles (CAs) of 53° and oil CAs of 155° exhibited superior stability, hydrophilicity, underwater superoleophobicity and ultralow oil adhesion, and hence it could separate the oil-water emulsion with a high efficiency of >99%. This membrane showed the combined advantages of high oil rejection rate and ultralow membrane fouling, making it promising for practical oil-water emulsion separation applications.

Simple fabrication of a multifunctional inorganic paper with high efficiency separations for both liquids and particles

2018 ◽  
Vol 6 (43) ◽  
pp. 21524-21531 ◽  
Author(s):  
Gang Wen ◽  
Xiaoyu Gao ◽  
Zhiguang Guo
Keyword(s):  
High Efficiency ◽  
Dye Adsorption ◽  
Environmentally Friendly ◽  
Adsorption Characteristics ◽  
Emulsion Separation ◽  
Pm Removal ◽  
High Efficiency Separations ◽  
Environmentally Friendly Method

An inorganic paper with simultaneous emulsion separation, PM removal and dye adsorption characteristics has been prepared by a facile and environmentally-friendly method.

Method of high frequency therapy at cows' mastitis during machine milking

2020 ◽  
pp. 9-12
Author(s):  
Viktor E. Lyubimov ◽  
Keyword(s):  
Dairy Cows ◽  
Electromagnetic Fields ◽  
High Frequency ◽  
High Efficiency ◽  
Environmentally Friendly ◽  
Ultrahigh Frequency ◽  
Machine Milking ◽  
High Frequency Electromagnetic Field ◽  
Milking Machine ◽  
Methods Of Treatment

Health of dairy cows ensures human health, so it is important that dairy products do not contain antibiotics that are used to treat any inflammation, including mastitis. In Russia at present, the problem of mastitis in cows exists with both attached and loose housing of cows. Mastitis of dairy cows are the great problem in milking husbandry. Losses from mastitis in milk yield can reach 15-20%. The main reasons for the occurrence of nonspecific mastitis of cows are the shortcomings of the working components of the milking machine: the degree of deterioration of the nipple rubber and the violation of machine milking technology (the reduction in pre-milking time and vacuum fluctuations account for 70% of all causes). Treatment of mastitis with antibiotics is effective, but not environmentally friendly and unacceptable. For the treatment of inflammation of the udder, it is necessary to use more environmentally friendly methods of treatment, one of which is the exposure to ultra-high frequency electromagnetic field tested by medicine. Use of three types of medical-mobile milking machines with the same method of exposure to ultrahigh-frequency electromagnetic fields on cow's nipples through electrodes in milking cups: LPDA-1-UHF, LPDA-2-UHF and LPDA-UHF-30 M, is described in the article. Author proved that cows with subclinical forms of mastitis recovered faster during milking with exposure to the ultrahigh frequency than when treated by antibiotics, and milking with the ultrahigh frequency device helps to recover 82% of the affected quarters with clinical forms and 100% of cows with subclinical forms of mastitis or with udder irritation. The high efficiency of the method of exposure to electromagnetic fields of the ultrahigh frequency during machine milking by means of medical-mobile milking machines LPDA-UHF for the prevention and treatment of mastitis of cows was shown.

Chlorosulfonic Acid Supported Piperidine-4-carboxylic Acid (PPCA) Functionalized Fe3O4 Nanoparticles (Fe3O4-PPCA): The Efficient, Green and Reusable Nanocatalyst for the Synthesis of Pyrazolyl Coumarin Derivatives under Solvent-Free Conditions

2019 ◽  
Vol 22 (2) ◽  
pp. 123-128
Author(s):  
Setareh Habibzadeh ◽  
Hassan Ghasemnejad-Bosra ◽  
Mina Haghdadi ◽  
Soheila Heydari-Parastar
Keyword(s):  
Carboxylic Acid ◽  
Fe3o4 Nanoparticles ◽  
High Efficiency ◽  
Reaction Times ◽  
Chlorosulfonic Acid ◽  
Aromatic Aldehydes ◽  
Solvent Free ◽  
Magnetic Nanocatalyst ◽  
One Pot ◽  
Solvent Free Conditions

Background: In this study, we developed a convenient methodology for the synthesis of coumarin linked to pyrazolines and pyrano [2,3-h] coumarins linked to 3-(1,5-diphenyl-4,5- dihydro-1H-pyrazol-3-yl)-chromen-2-one derivatives using Chlorosulfonic acid supported Piperidine-4-carboxylic acid (PPCA) functionalized Fe3O4 nanoparticles (Fe3O4-PPCA) catalyst. Materials and Methods:: Fe3O4-PPCA was investigated as an efficient and magnetically recoverable Nanocatalyst for the one-pot synthesis of substituted coumarins from the reaction of coumarin with a variety of aromatic aldehydes in high to excellent yield at room temperature under solvent-free conditions. The magnetic nanocatalyst can be easily recovered by applying an external magnet device and reused for at least 10 reaction runs without considerable loss of reactivity. Results and Conclusion: The advantages of this protocol are the use of commercially available materials, simple and an inexpensive procedure, easy separation, and an eco-friendly procedure, and it shows good reaction times, good to high yields, inexpensive and practicability procedure, and high efficiency.

scholarly journals Aqueous one-pot synthesis of well-defined zwitterionic diblock copolymers by RAFT polymerization: an efficient and environmentally-friendly route to a useful dispersant for aqueous pigments

2021 ◽  
Vol 23 (3) ◽  
pp. 1248-1258
Author(s):  
Shannon M. North ◽  
Steven P. Armes
Keyword(s):  
Iron Oxide ◽  
Diblock Copolymers ◽  
Raft Polymerization ◽  
Environmentally Friendly ◽  
Iron Oxide Particles ◽  
One Pot ◽  
One Pot Synthesis ◽  
Highly Effective ◽  
Oxide Particles

An atom-efficient, wholly aqueous one-pot synthesis of zwitterionic diblock copolymers has been devised. Such copolymers can serve as highly effective aqueous dispersants for nano-sized transparent yellow iron oxide particles.

Fast and high-efficiency synthesis of 2-substituted benzothiazoles via combining enzyme catalysis and photoredox catalysis in one-pot

2020 ◽  
pp. 104607
Author(s):  
Zeng-Jie Yang ◽  
Qing-Tian Gong ◽  
Yuan Yu ◽  
Wei-Fan Lu ◽  
Zhe-Ning Wu ◽  
...  
Keyword(s):  
Enzyme Catalysis ◽  
High Efficiency ◽  
Photoredox Catalysis ◽  
One Pot
Sign in / Sign up

Export Citation Format

Share Document