scholarly journals Tuning the shape anisotropy of loosely bound colloid-like ionic clusters in solution

2019 ◽  
Vol 21 (3) ◽  
pp. 1152-1159 ◽  
Author(s):  
Jana Eisermann ◽  
Dariush Hinderberger
Keyword(s):  
Self Assembly ◽  
Shape Anisotropy ◽  
Assembly Process ◽  
Ionic Clusters ◽  
Ionic Ratio

We characterize the influence of the ionic ratio on the dynamic self-assembly process involving a macrocyclic tetraimidazolium molecular box and small dianionic salts into highly defined, colloid-like ionic clusters in solution, called ionoids.

Preparation of BSA Nanoparticles by Desolvation Technique Using Acetone as Desolvating Agent

2012 ◽  
Vol 5 (1) ◽  
pp. 1643-1647
Author(s):  
Krishna Sailaja A ◽  
Amareshwar P
Keyword(s):  
Aqueous Solution ◽  
Standard Deviation ◽  
Process Parameters ◽  
Self Assembly ◽  
Size Control ◽  
Polymeric Materials ◽  
Preparation Condition ◽  
Assembly Process ◽  
Average Size

In order to see the functionality and toxicity of nanoparticles in various food and drug applications, it is important to establish procedures to prepare nanoparticles of a controlled size. Desolvation is a thermodynamically driven self-assembly process for polymeric materials. In this study, we prepared BSA nanoparticles using the desolvation technique using acetone as desolvating agent. Acetone was added intermittently into 1% BSA solution at different pH under stirring at 700 rpm. Amount of acetone added, intermittent timeline of acetone addition, and pH of solution were considered as process parameters to be optimized. The effect of the process parameters on size of the nanoparticles was studied. The results indicated that the size control of BSA nanoparticles was achieved by adding acetone intermittently. The standard deviation of average size of BSA nanoparticles at each preparation condition was minimized by adding acetone intermittently. The intermittent addition in polymeric aqueous solution can be useful for size control for food or drug applications.  

scholarly journals Interfacial Crystallization and Supramolecular Self-Assembly of Spider Silk Inspired Protein at the Water-Air Interface

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4239
Author(s):  
Pezhman Mohammadi ◽  
Fabian Zemke ◽  
Wolfgang Wagermaier ◽  
Markus B. Linder
Keyword(s):  
Self Assembly ◽  
Spider Silk ◽  
Assembly Process ◽  
Protein Solution ◽  
Time Resolved ◽  
Macromolecular Assembly ◽  
X Ray Scattering ◽  
Air Interface ◽  
Fundamental Research ◽  
Β Sheet

Macromolecular assembly into complex morphologies and architectural shapes is an area of fundamental research and technological innovation. In this work, we investigate the self-assembly process of recombinantly produced protein inspired by spider silk (spidroin). To elucidate the first steps of the assembly process, we examined highly concentrated and viscous pendant droplets of this protein in air. We show how the protein self-assembles and crystallizes at the water–air interface into a relatively thick and highly elastic skin. Using time-resolved in situ synchrotron X-ray scattering measurements during the drying process, we showed that the skin evolved to contain a high β-sheet amount over time. We also found that β-sheet formation strongly depended on protein concentration and relative humidity. These had a strong influence not only on the amount, but also on the ordering of these structures during the β-sheet formation process. We also showed how the skin around pendant droplets can serve as a reservoir for attaining liquid–liquid phase separation and coacervation from the dilute protein solution. Essentially, this study shows a new assembly route which could be optimized for the synthesis of new materials from a dilute protein solution and determine the properties of the final products.

scholarly journals Self-Assembled Nanomaterials Based on Complementary Sn(IV) and Zn(II)-Porphyrins, and Their Photocatalytic Degradation for Rhodamine B Dye

Molecules ◽  
2021 ◽  
Vol 26 (12) ◽  
pp. 3598
Author(s):  
Nirmal K. Shee ◽  
Hee-Joon Kim
Keyword(s):  
Aqueous Solution ◽  
Visible Light Irradiation ◽  
Rhodamine B ◽  
Self Assembly ◽  
The Self ◽  
Assembly Process ◽  
Absorption Bands ◽  
Ligand Coordination ◽  
Rhodamine B Dye ◽  
Metal Ligand

A series of porphyrin triads (1–6), based on the reaction of trans-dihydroxo-[5,15-bis(3-pyridyl)-10,20-bis(phenyl)porphyrinato]tin(IV) (SnP) with six different phenoxy Zn(II)-porphyrins (ZnLn), was synthesized. The cooperative metal–ligand coordination of 3-pyridyl nitrogens in the SnP with the phenoxy Zn(II)-porphyrins, followed by the self-assembly process, leads to the formation of nanostructures. The red-shifts and remarkable broadening of the absorption bands in the UV–vis spectra for the triads in CHCl3 indicate that nanoaggregates may be produced in the self-assembly process of these triads. The emission intensities of the triads were also significantly reduced due to the aggregation. Microscopic analyses of the nanostructures of the triads reveal differences due to the different substituents on the axial Zn(II)-porphyrin moieties. All these nanomaterials exhibited efficient photocatalytic performances in the degradation of rhodamine B (RhB) dye under visible light irradiation, and the degradation efficiencies of RhB in aqueous solution were observed to be 72~95% within 4 h. In addition, the efficiency of the catalyst was not impaired, showing excellent recyclability even after being applied for the degradation of RhB in up to five cycles.

scholarly journals Metal Oxide-Related Dendritic Structures: Self-Assembly and Applications for Sensor, Catalysis, Energy Conversion and Beyond

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1686
Author(s):  
Ruohong Sui ◽  
Paul A. Charpentier ◽  
Robert A. Marriott
Keyword(s):  
Metal Oxide ◽  
Energy Conversion ◽  
Self Assembly ◽  
Hierarchical Structures ◽  
The Self ◽  
Assembly Process ◽  
Electronic Noses ◽  
Dendritic Nanostructures ◽  
Energy Conversion And Storage ◽  
The Aesthetic

In the past two decades, we have learned a great deal about self-assembly of dendritic metal oxide structures, partially inspired by the nanostructures mimicking the aesthetic hierarchical structures of ferns and corals. The self-assembly process involves either anisotropic polycondensation or molecular recognition mechanisms. The major driving force for research in this field is due to the wide variety of applications in addition to the unique structures and properties of these dendritic nanostructures. Our purpose of this minireview is twofold: (1) to showcase what we have learned so far about how the self-assembly process occurs; and (2) to encourage people to use this type of material for drug delivery, renewable energy conversion and storage, biomaterials, and electronic noses.

Thioderivatives of Resorcin[4]arene and Pyrogallol[4]arene: Are Thiols Tolerated in the Self-Assembly Process?

2021 ◽  
Author(s):  
Suren J. Nemat ◽  
Konrad Tiefenbacher
Keyword(s):  
Self Assembly ◽  
The Self ◽  
Assembly Process

Assembly effect on the charge carrier mobility in quaterthiophene-based n/p-materials

2019 ◽  
Vol 7 (22) ◽  
pp. 6649-6655
Author(s):  
A. López-Andarias ◽  
C. Atienza ◽  
J. López-Andarias ◽  
W. Matsuda ◽  
T. Sakurai ◽  
...  
Keyword(s):  
Charge Carrier ◽  
Self Assembly ◽  
Carrier Mobility ◽  
Charge Carrier Mobility ◽  
Assembly Process ◽  
Charge Mobility

Effect of the peptide-based quaterthiophene self-assembly process on the charge mobility properties of the n/p-materials formed is studied.

Controllable Synthesis of Cobalt Porphyrin Nanocrystals through Micelle Confinement Self-Assembly

MRS Advances ◽  
2020 ◽  
Vol 5 (42) ◽  
pp. 2147-2155
Author(s):  
Sudi Chen ◽  
Xitong Ren ◽  
Shufang Tian ◽  
Jiajie Sun ◽  
Feng Bai
Keyword(s):  
Self Assembly ◽  
Water Oxidation ◽  
Separation Efficiency ◽  
Noncovalent Interactions ◽  
Building Blocks ◽  
The Self ◽  
Hexagonal Prism ◽  
Assembly Process ◽  
Surfactant Micelles ◽  
Cobalt Porphyrin

AbstractThe self-assembly of optically active building blocks into functional nanocrystals as high-activity photocatalysts is a key in the field of photocatalysis. Cobalt porphyrin with abundant catalytic properties is extensively studied in photocatalytic water oxidation and CO2 reduction. Here, we present the fabrication of cobalt porphyrin nanocrystals through a surfactant-assisted interfacial self-assembly process using Co-tetra(4-pyridyl) porphyrin as building block. The self-assembly process relies on the combined noncovalent interactions such as π-π stacking and axial Co-N coordination between individual porphyrin molecules within surfactant micelles. Tuning different reaction conditions (temperature, the ratio of co-solvent DMF) and types of surfactant, various nanocrystals with well-defined 1D to 3D morphologies such as nanowires, nanorods and nano hexagonal prism were obtained. Due to the ordered accumulation of molecules, the nanocrystals exhibit the properties of the enhanced capability of visible light capture and can conduce to improve the transport and separation efficiency of the photogenerated carriers, which is important for photocatalysis. Further studies of photocatalytic CO2 reduction are being performed to address the relationship between the size and shape of the nanocrystals with the photocatalytic activity.

ChemInform Abstract: The Importance of the Self-Assembly Process to Control Mechanical Properties of Low Molecular Weight Hydrogels

ChemInform ◽  
2013 ◽  
Vol 44 (36) ◽  
pp. no-no
Author(s):  
Jaclyn Raeburn ◽  
Andre Zamith Cardoso ◽  
Dave J. Adams
Keyword(s):  
Mechanical Properties ◽  
Molecular Weight ◽  
Self Assembly ◽  
The Self ◽  
Low Molecular Weight ◽  
Assembly Process

Structure and dehydration of layered perovskite niobate with bilayer hydrates prepared by exfoliation/self-assembly process

2008 ◽  
Vol 181 (7) ◽  
pp. 1684-1694 ◽  
Author(s):  
Yufeng Chen ◽  
Xinhua Zhao ◽  
Hui Ma ◽  
Shulan Ma ◽  
Gailing Huang ◽  
...  
Keyword(s):  
Self Assembly ◽  
Layered Perovskite ◽  
Assembly Process

Chromatographic evaluation of reversed-phase/anion-exchange/cation-exchange trimodal stationary phases prepared by electrostatically driven self-assembly process

2011 ◽  
Vol 1218 (22) ◽  
pp. 3407-3412 ◽  
Author(s):  
Xiaodong Liu ◽  
Christopher Pohl ◽  
Andrew Woodruff ◽  
Jinhua Chen
Keyword(s):  
Cation Exchange ◽  
Anion Exchange ◽  
Self Assembly ◽  
Stationary Phases ◽  
Reversed Phase ◽  
Assembly Process ◽  
Exchange Cation
Sign in / Sign up

Export Citation Format

Share Document