scholarly journals Stereoselective synthesis of allele-specific BET inhibitors

2020 ◽  
Vol 18 (38) ◽  
pp. 7533-7539
Author(s):  
Adam G. Bond ◽  
Andrea Testa ◽  
Alessio Ciulli

Developing stereoselective synthetic routes that are efficient and cost-effective allows easy access to allele-selective bumped BET inhibitors.

2020 ◽  
Author(s):  
Adam Bond ◽  
Andrea Testa ◽  
Alessio Ciulli

Developing stereoselective synthetic routes that are efficient and cost-effective is important to allow easy access to biologically active molecules. Our previous syntheses of allele-selective bumped inhibitors of the Bromo and Extra-Terminal (BET) bromodomain proteins, Brd2, Brd3, Brd4 and BrdT, required a wasteful, late-stage alkylation step and expensive chiral separation. To circumvent these limitations, we developed a route based on stereocontrolled alkylation of an aspartic acid derivative that was used in a divergent, racemisation-free protocol to yield structurally diverse and enantiopure triazolodiazepines. With this approach, we synthesized bumped thienodiazepine-based BET inhibitor, ET-JQ1-OMe, in five steps and 99% ee without the need for chiral chromatography. Exquisite selectivity of ET-JQ1-OMe for Leu-Ala and Leu-Val mutants over wild-type bromodomain was confirmed by isothermal titration calorimetry and X-ray crystallography. Our new approach provides unambiguous chemical evidence for the absolute stereochemistry of the active, allele-specific BET inhibitor and a viable route that will facilitate wider access to this compound class.


2020 ◽  
Author(s):  
Adam Bond ◽  
Andrea Testa ◽  
Alessio Ciulli

Developing stereoselective synthetic routes that are efficient and cost-effective is important to allow easy access to biologically active molecules. Our previous syntheses of allele-selective bumped inhibitors of the Bromo and Extra-Terminal (BET) bromodomain proteins, Brd2, Brd3, Brd4 and BrdT, required a wasteful, late-stage alkylation step and expensive chiral separation. To circumvent these limitations, we developed a route based on stereocontrolled alkylation of an aspartic acid derivative that was used in a divergent, racemisation-free protocol to yield structurally diverse and enantiopure triazolodiazepines. With this approach, we synthesized bumped thienodiazepine-based BET inhibitor, ET-JQ1-OMe, in five steps and 99% ee without the need for chiral chromatography. Exquisite selectivity of ET-JQ1-OMe for Leu-Ala and Leu-Val mutants over wild-type bromodomain was confirmed by isothermal titration calorimetry and X-ray crystallography. Our new approach provides unambiguous chemical evidence for the absolute stereochemistry of the active, allele-specific BET inhibitor and a viable route that will facilitate wider access to this compound class.


2020 ◽  
Vol 23 (26) ◽  
pp. 2960-2968
Author(s):  
Renáta Kertiné Ferenczi ◽  
Tünde-Zita Illyés ◽  
Sándor Balázs Király ◽  
Gyula Hoffka ◽  
László Szilágyi ◽  
...  

The reported enantioselective synthesis for the preparation of (+)-(2R,3R)-2-(4- hydroxy-3-methoxyphenyl)-3-hydroxymethyl-1,4-benzodioxane-6-carbaldehyde, precursor for the stereoselective synthesis of bioactive flavanolignans, could not be reproduced. Thus, the target molecule was prepared via the synthesis and separation of diastereomeric O-glucosides. TDDFT-ECD calculations and the 1,4-benzodioxane helicity rule were utilized to determine the absolute configuration. ECD calculations also confirmed that the 1Lb Cotton effect is governed by the helicity of the heteroring, while the higher-energy ECD transitions reflect mainly the orientation of the equatorial C-2 aryl group.


2021 ◽  
Author(s):  
Wei-Yu Shi ◽  
Ya-Nan Ding ◽  
Nian Zheng ◽  
Xue-Ya Gou ◽  
Zhe Zhang ◽  
...  

C-Aryl glycosides are of high value as drug candidates. Here a novel and cost-effective nickel catalyzed ortho-CAr-H glycosylation reaction with high regioselectivity and excellent α-selectivity is described. This method shows...


ChemInform ◽  
2014 ◽  
Vol 45 (9) ◽  
pp. no-no
Author(s):  
Soumen Biswas ◽  
Pradeep Kumar Jaiswal ◽  
Shivendra Singh ◽  
Shaikh M. Mobin ◽  
Sampak Samanta

Synlett ◽  
2019 ◽  
Vol 30 (06) ◽  
pp. 665-673 ◽  
Author(s):  
Peter Langer ◽  
Zahid Hassan

This account describes our recent findings and progress in synthesizing chlorinated arenes and hetarenes by one-pot cyclizations of 1,3-bis-silyl enol ether derivatives. These reactions allow for the preparation of highly functionalized products with a high level of regioselectivity. The synthetic routes are cost-effective avoiding additional functionalization steps. The products are difficult to be accessed by other methods. The chlorine atom is of relevance in medicinal and agriculture chemistry. In addition, it allows further functionalizations by transition-metal-catalyzed cross-coupling reactions.1 Introduction2 Cyclizations of 2-Chloro-1,3-bis(silyloxy)-1,3-butadienes2.1 3,5-Dihydroxychlorophthalates2.2 2,4-Dihydroxy-homochlorophthalates2.3 2-(Arylsulfonyl)chloropyridines2.4 1-Azaxanthones3 Cyclizations of 4-Chloro-1,3-bis(trimethylsilyloxy)-1,3-butadienes3.1 3-Chlorosalicylates3.2 Functionalized Chlorobiaryls3.3 3-Chloro-5-(2-chloroethyl)-salicylates3.4 2,4-Dihydroxychlorobenzophenones4 Cyclizations of 2-Chloro-3-(silyloxy)-2-en-1-ones4.1 Functionalized Chlorophenols4.2 Functionalized Chlorinated Biaryls and Chlorofluorenones4.3 Functionalized Chlorochromenones4.4 Functionalized 3-(Methylthio)chlorophenols4.5 Functionalized 3-Chloromethylphenols5 Conclusions6 List of Abbreviations


Author(s):  
Abu Salim ◽  
Marney D. Perry ◽  
John A. Krogue ◽  
Allen Walker

The oil and gas pipelines are spread around the world in all nations as complex networks. The increased usage of gas is rapidly increasing this network. These networks are generally made from various diameters of pipes. The pipelines are serviced on as required basis, using pig launcher and receivers to suit the pipe diameter. Pigs of different types may be launched in different sequences, to clean the pipes and to obtain various data related to pipe condition and location. The pig launching and receiving process uses rapid pressure changes in the launcher and receiver and some magnitude of impact may be experienced by the unit. This process also requires frequent access to the launcher/receiver unit. To have an efficient and cost effective usage of the launcher/receiver unit, it is essential to have a door mechanism, which is safe, robust, capable of the above loading conditions, requires minimum service and is easy to use. PECO has recently developed & designed a door, which incorporates ail the above requirements. The door was put to high pressure testing and the test results were so encouraging that PECO named it SafeLock® Closure. The design was developed with gas pipelines in mind. However it is equally applicable to vessels, exchangers and other metal openings where quick, frequent and easy access is required. Safety has been the prime concern through out the design and development process of this closure. Therefore the final product has resulted in a very safe closure. The initial design of the SafeLock® door / closure used a spring load to make it easy in operation. This was removed in the later design. The segmental blocks, usually called C-ring segments, are operated to move in and out of the shell-sub annulus. The closure opening and closing is performed by the use of a single lever arm. This way only one person can operate (open and close) the door / closure. For opening and closing, the lever-arm needs to be rotated less than 40 degree angle. The rotation direction of the lever arm in closing is reverse of that in opening. The door / head can be fully retrieved from the shell-sub and rest by the side of the launcher/receiver to provide complete access to the opening. This door / closure provides quick access to launcher / receiver, pig traps, meter provers, filter vessel, scrubber, scraper, manway to pressure vessel, etc. This closure can be mounted in the vertical or horizontal position. During change of filter elements, launching a pig, quick access to container under pressure, this closure door is designed to provide a safe and fast service. The construction, operation, design details and application of the new closure door are included in this paper and explained with the help of the design diagrams and photographs.


2013 ◽  
Vol 11 (41) ◽  
pp. 7084 ◽  
Author(s):  
Soumen Biswas ◽  
Pradeep Kumar Jaiswal ◽  
Shivendra Singh ◽  
Shaikh M. Mobin ◽  
Sampak Samanta

Blood ◽  
2012 ◽  
Vol 120 (21) ◽  
pp. 5127-5127
Author(s):  
Paulo Vidal Campregher ◽  
Roberta Cardoso Petroni ◽  
Nair Muto ◽  
Rubia Santana ◽  
Roberta Sitnik ◽  
...  

Abstract Abstract 5127 NOTCH1 is a proto-oncogene with activating mutations described in a variety of malignancies, including acute lymphoblastic leukemia (ALL), mantle cell lymphoma (MCL) and chronic lymphocytic leukemia (CLL). While the prognostic significance of NOTCH1 mutations remains controversial in ALL, recent data suggest that NOTCH1 PEST domain mutations are associated with adverse prognosis in patients with CLL. NOTCH1 mutations are found in around 8% of CLL patients at diagnosis and more than 30% of patients with advanced disease. Since this disease has a heterogeneous clinical course and few prognostic markers, we aimed at designing a fast, cost effective and robust assay to detect NOTCH1 PEST domain mutations in patients with CLL for the clinical laboratory. While 92% of the mutations in NOTCH1 PEST domain found in CLL are insertions or deletions, only 8% are represented by point mutations. Therefore we decided to use a fragment analysis approach in our assay. Given that a single mutation (c. 7544_7545delCT), represents roughly 75% of all PEST domain mutations in CLL we designed a test that can, at the same time, detect the presence of this mutation specifically and also any insertion or deletion in exon 34. We designed a PCR reaction using one FAM-labeled forward primer anchored at codon 2407 and two reverse primers. One specific for the c. 7544_7545delCT mutation anchored at codon 2414 yielding a product of 356 base pairs (bp) and one anchored at codon 2425, yielding a product of 391 bp, comprising the hot spot for mutations in the NOTCH1 PEST domain. Primers were designed with Primer3 software (http://frodo.wi.mit.edu/) and the specificity of the reaction evaluated using the tool “PCR in silico” (http://genome.ucsc.edu/cgi-bin/hgPcr?command=start). The test yields three possible outputs: A single 391 bp peak: wild type samplesThree peaks (391 bp, 389 bp and 356 bp): heterozygous for c. 7544_7545delCTTwo peaks (391 bp and another bigger or smaller, depending on the size of insertion/deletion): another insertion or deletion, but not c. 7544_7545delCT. We have studied 46 de-identified blood samples from patients with CLL, in several diverse stages, using our assay. In 40 patients, there was no NOTCH1 mutation detected. Six patients had a pattern compatible with c. 7544_7545delCT NOTCH1 mutation (see figure 1), and no patients presented with another mutation. Overall the frequency of NOTCH1 mutations in our series was 13 %. Selected mutated samples were confirmed through amplicon sequencing. In conclusion, we have designed a robust, fast and cost effective assay for routine identification of NOTCH1 PEST domain mutations using fragment analysis and allele specific pcr that is suitable for implementation in the clinical setting for CLL patients evaluation. We will continue testing more CLL patients in order to identify another, rarer, NOTCH1 mutations. Figure 1. Assay Results for NOTCH1 PEST Domain Mutations A – Wild Type NOTCH1 revealed by the presence of a single 391 bp peak. B – Presence of heterozygous c. 7544_7545delCT mutation evidenced by the presence of a 356 bp peak, corresponding to the allele specific pcr peak; and a double peak at 391 bp and 389 bp positions, corresponding to the wild type product (391 bp) and to the mutated product (389 bp) detected with the wild type primers. Figure 1. Assay Results for NOTCH1 PEST Domain Mutations . / A – Wild Type NOTCH1 revealed by the presence of a single 391 bp peak. . / B – Presence of heterozygous c. 7544_7545delCT mutation evidenced by the presence of a 356 bp peak, corresponding to the allele specific pcr peak; and a double peak at 391 bp and 389 bp positions, corresponding to the wild type product (391 bp) and to the mutated product (389 bp) detected with the wild type primers. Disclosures: No relevant conflicts of interest to declare.


Sign in / Sign up

Export Citation Format

Share Document