scholarly journals Molecular weights of the Thy-1 glycoproteins from rat thymus and brain in the presence and absence of deoxycholate

1978 ◽  
Vol 169 (2) ◽  
pp. 411-417 ◽  
Author(s):  
P W Kuchel ◽  
D G Campbell ◽  
A N Barclay ◽  
A F Williams
Keyword(s):  
Molecular Weight ◽  
Equilibrium Dialysis ◽  
Sedimentation Coefficient ◽  
Sedimentation Equilibrium ◽  
Membrane Glycoproteins ◽  
Guanidinium Chloride ◽  
Molecular Weights ◽  
Methionine Residue ◽  
Disulphide Bonds ◽  
Binding Data

1. The Thy-1 membrane glycoproteins from rat thymus and brain bound deoxycholate to 24% of their own weight as measured by equilibrium dialysis. The binding occurred co-operatively at the critical micelle concentration of deoxycholate, suggesting that the glycoproteins bind to a micelle, and not to the detergent monomer. 2. From sedimentation-equilibrium and deoxycholate-binding data the molecular weights of the glycoprotein monomers were calculated to be 18700 and 17500 for thymus and brain Thy-1 glycoprotein monomers were calculated to be 18700 and 17500 for thymus and brain Thy-1 glycoproteins respectively. The molecular weight of the polypeptide part of the glycoprotein is thus 12500. 3. In the absence of deoxycholate, brain or thymus Thy-1 glycoprotein formed large homogeneous complexes of mol. wt. 270000 or 300000 respectively. The sedimentation coefficient of these was 12.8 S. The complex was only partially dissociated by 4M-guanidinium chloride. 4. After cleavage of brain or thymus Thy-1 glycoprotein with CNBr, two peptides were clearly identified. They were linked by disulphide bonds and both contained carbohydrate. This cleavage suggests there is only one methionine residue per molecule, which is consistent with the above molecular weights and the known amino acid composition.

scholarly journals Haemoglobin from the tadpole shrimp, Lepidurus apus lubbocki Characterization of the molecule and determination of the number of polypeptide chains

1979 ◽  
Vol 183 (2) ◽  
pp. 325-330 ◽  
Author(s):  
E Ilan ◽  
E Daniel
Keyword(s):  
Molecular Weight ◽  
Polyacrylamide Gel Electrophoresis ◽  
Sodium Dodecyl ◽  
Sedimentation Coefficient ◽  
Sedimentation Equilibrium ◽  
Guanidinium Chloride ◽  
Tadpole Shrimp ◽  
Polypeptide Chains

Haemoglobin from the tadpole shrimp, Lepidurus apus lubbocki, was found to have a sedimentation coefficient (s020,w) of 19.3 +/- 0.2 S and a molecular weight, as determined by sedimentation equilibrium, of 798000 +/- 20000. The amino acid composition showed the lack of cysteine and cystine residues. A haem content of 3.55 +/- 0.03% was determined, corresponding to a minimal mol.wt. of 17400 +/- 200. The pH-independence in the range pH 5-11 of the sedimentation coefficient indicates a relatively high stability of the native molecule. Sodium dodecyl sulphate/polyacrylamide-gel electrophoresis gave one band with mobility corresponding to a mol.wt. of 34000 +/- 1500. The molecular weight of the polypeptide chain was determined to be 32800 +/- 800 by sedimentation equilibrium in 6 M-guanidinium chloride and 0.1 M-2-mercaptoethanol. The findings indicate that Lepidurus haemoglobin is composed of 24 identical polypeptide chains, carrying two haem groups each.

scholarly journals Sedimentation-equilibrium studies on the heterogeneity of two β-lactamases

1970 ◽  
Vol 118 (3) ◽  
pp. 467-474 ◽  
Author(s):  
P. H. Lloyd ◽  
A. R. Peacocke
Keyword(s):  
Molecular Weight ◽  
Diffusion Coefficients ◽  
Minor Component ◽  
Theoretical Solution ◽  
Sedimentation Equilibrium ◽  
Equilibrium Studies ◽  
Molecular Weights ◽  
A Minor

Solutions of crystalline β-lactamase I and β-lactamase II, prepared by Kuwabara (1970), were examined in the ultracentrifuge and their sedimentation coefficients, diffusion coefficients, molecular weights and heterogeneity determined. Each sample was shown to consist of a major component comprising at least 97% of the material and a minor component of much higher molecular weight. The molecular weights of the major components were 27800 for β-lactamase I and 35600 for β-lactamase II. Emphasis is placed on a straightforward practical way of analysing the sedimentation-equilibrium results on mixtures of two macromolecular components rather than on a strict theoretical solution. Appendices describe the theory of systems at both chemical and sedimentation equilibrium and the procedure for calculating the combined distribution of two components.

scholarly journals Purification and structural characterization of a cartilage matrix protein

1981 ◽  
Vol 197 (2) ◽  
pp. 367-375 ◽  
Author(s):  
M Paulsson ◽  
D Heinegård
Keyword(s):  
Molecular Weight ◽  
Matrix Protein ◽  
Polyacrylamide Gel Electrophoresis ◽  
Sodium Dodecyl ◽  
Cartilage Matrix ◽  
Sedimentation Equilibrium ◽  
Intact Protein ◽  
Gel Chromatography ◽  
Guanidinium Chloride ◽  
Cscl Density Gradient

The cartilage matrix protein is a major non-collagenous protein in bovine cartilage. It was purified from a 5 M-guanidinium chloride extract of bovine tracheal cartilage by sequential CsCl-density-gradient centrifugation, gel chromatography in guanidinium chloride and differential precipitation. The molecular weight of the intact protein is 148 000, determined by sedimentation-equilibrium centrifugation. It was dissociated to three subunits of molecular weight 52 000 by reduction of disulphide bonds. The cartilage matrix protein was insoluble in low-salt solutions and behaved abnormally on sodium dodecyl sulphate/polyacrylamide-gel electrophoresis. The content of cysteine was high, whereas the contents of aromatic amino acids were low. The carbohydrate content was 3.9% (w/w). Glycopeptides obtained after papain digestion were heterogenous on gel chromatography. Asparagine/aspartic acid was enriched in the purified glycopeptides, indicating the presence of N-glycosidic linkages to protein.

Behavior of Rubber Hydrocarbon in a Molecular Still

1939 ◽  
Vol 12 (4) ◽  
pp. 789-793 ◽  
Author(s):  
W. Harold Smith ◽  
Henry J. Wing
Keyword(s):  
Molecular Weight ◽  
Vapor Pressure ◽  
High Molecular Weight ◽  
Molecular Species ◽  
Decomposition Temperature ◽  
Sedimentation Equilibrium ◽  
Chain Molecules ◽  
Molecular Weights ◽  
Average Value ◽  
Long Chain

Abstract Some investigators believe that rubber consists of associated molecules, and others accept Staudinger's view that long-chain molecules are formed by polymerization. Pummerer, Andriessen and Gündel have obtained a molecular weight as low as 600. Meyer and Mark believe that it is approximately 5,000, although they calculated on the basis of osmotic pressures values as high as 350,000. They, as well as Pummerer, consider that rubber is an associated colloid and that high molecular weights are caused by aggregates, sometimes called micelles. Staudinger, however, considers that the long-chain rubber molecule itself has a molecular weight of 200,000 or even 350,000, and that products with lower values, which may be formed in rubber, result from degradation. if the molecules are small it might be possible to distil them if their vapor pressure could be sufficiently increased, but none would distil without decomposition if the molecules are very large. Because the vapor pressure of rubber below its decomposition temperature is low, it appeared of interest to attempt to distil the material in a molecular still. Paraffin wax and sugar, both substances of relatively high molecular weight, have been successfully distilled in this type of apparatus. Subsequent to the work described in this paper, the molecular weight of sol rubber prepared at this Bureau was determined by Kraemer and Lansing of E. I. du Pont de Nemours & Co., Inc. They used the Svedberg method of sedimentation equilibrium in an ultracentrifuge with ethereal solutions of sol rubber. The temperature of the solutions during determinations was approximately 10° C, and an average value of 460,000 was obtained. There was evidenced of a mixture of molecular species.

scholarly journals Conformational changes in gastric mucoproteins induced by caesium chloride and guanidinium chloride

1974 ◽  
Vol 141 (3) ◽  
pp. 641-646 ◽  
Author(s):  
David Snary ◽  
Adrian Allen ◽  
Roger H. Pain
Keyword(s):  
Molecular Weight ◽  
Conformational Changes ◽  
Sedimentation Coefficient ◽  
Water Structure ◽  
Water Soluble ◽  
Native Conformation ◽  
Guanidinium Chloride ◽  
Gastric Mucus ◽  
Caesium Chloride ◽  
Low Concentrations

1. Caesium chloride and guanidinium chloride were shown to cause conformational changes in the high-molecular-weight mucoprotein A of water-soluble gastric mucus with no change in molecular weight. 2. Increasing concentrations of CsCl decrease the viscosity of the mucoprotein bringing about a transition which is essentially complete in 0.1m-CsCl. The shear-dependence of viscosity of the mucoprotein is abolished by low concentrations of CsCl. The normally highly expanded molecule becomes contracted in CsCl to a molecule having the same symmetry but a smaller volume and decreased solvation, in keeping with an increased sedimentation coefficient (18.7S→33S). 3. This contracted form does not revert to the native conformation on removal of the CsCl. 4. A mechanism is discussed in terms of the effect of the Cs+and Cl−ions on water structure and the water–mucoprotein interaction. 5. Guanidinium chloride causes the CsCl-treated material to expand, in keeping with a decrease in s025,w (33S→26S). This is analogous to the known unfolding effect of guanidinium chloride on proteins and suggests that guanidinium chloride solubilizes groups involved in stabilizing the contracted structure. Removal of the guanidinium chloride results in a limited aggregation of four mucoprotein molecules. 6. These results show that caution must be exercised before interpreting the physical properties of mucoproteins which have been treated with CsCl and/or guanidinium chloride.

scholarly journals Some Physicochemical Properties of Erysimum Latent Virus

1982 ◽  
Vol 35 (1) ◽  
pp. 5
Author(s):  
Keith H Gough ◽  
Glenn G Lilley ◽  
Dharma D Shukla ◽  
Frank Woods
Keyword(s):  
Molecular Weight ◽  
Buoyant Density ◽  
Latent Virus ◽  
Sedimentation Equilibrium ◽  
Protein Subunit ◽  
Molecular Weights ◽  
Caesium Chloride ◽  
Rna Content ◽  
Velocity Diffusion ◽  
Phosphorus Determination

Sedimentation velocity, diffusion coefficient and sedimentation equilibrium measurements gave a molecular weight of 5 �90 x 106 for the intact Erysimum latent virus. The molecular weight of the empty shell was estimated to be 3�92 X 106 and the protein subunit to be 21 600. The RNA content calculated from the molecular weights of the full and empty particles is 33 %, in agreement with that estimated from the buoyant density in caesium chloride. However, a direct phosphorus determination gave an RNA content of only 28 %.

scholarly journals Erythrocruorin from the water-flea Daphnia magna. Quaternary structure and arrangement of subunits

1982 ◽  
Vol 207 (2) ◽  
pp. 297-303 ◽  
Author(s):  
E Ilan ◽  
E Weisselberg ◽  
E Daniel
Keyword(s):  
Molecular Weight ◽  
Daphnia Magna ◽  
Quaternary Structure ◽  
Slow Component ◽  
Polyacrylamide Gel Electrophoresis ◽  
Sodium Dodecyl ◽  
Sedimentation Coefficient ◽  
Sedimentation Equilibrium ◽  
Subunit Structure ◽  
Single Chain

The subunit structure of erythrocruorin from the cladoceran Daphnia magna was studied. The native protein was found to have a sedimentation coefficient (S2(20), w) of 17.9 +/- 0.2 S and a molecular weight, as determined by sedimentation equilibrium, of 494 000 +/- 33 000. Iron and haem determinations gave 0.312 +/- 0.011% and 3.84 +/- 0.04%, corresponding to minimal molecular weights of 17900 +/- 600 and 16 100 +/- 200 respectively. Sodium dodecyl sulphate/polyacrylamide-gel electrophoresis gave one band with mobility corresponding to a molecular weight of 31 000 +/- 1 500. The molecular weight of the polypeptide chain determined by sedimentation equilibrium in 6 M-guanidinium chloride and 0.1 M-2-mercaptoethanol is 31 100 +/- 1300. On a molecular-weight basis, Daphnia erythrocruorin is composed of 16 identical polypeptide chains carrying two haem groups each. The native structure is stable between pH5 and 8.5. At alkaline and acidic pH, a gradual decrease in the sedimentation coefficient down to 9.8S occurs. Above pH 10 and below pH4, a slow component with S20, w between 2.7S and 4.0S is observed. The 2.7S, 4.0S and 9.8S species are identified as single-chain subunits, subunit dimers and half-molecules respectively. We propose a model for the molecule composed of 16 2.7S subunits grouped in two layers stacked in an eclipsed orientation, the eight subunits of each layer occupying the vertices of a regular eight-sided polygon. Support for this arrangement is provided from electron microscopy and from analysis of the pH-dissociation pattern.

scholarly journals Tamm–Horsfall urinary glycoprotein. The subunit structure

1970 ◽  
Vol 120 (2) ◽  
pp. 425-432 ◽  
Author(s):  
A. P. Fletcher ◽  
A. Neuberger ◽  
Wendy A. Ratcliffe
Keyword(s):  
Molecular Weight ◽  
Sodium Dodecyl Sulphate ◽  
Sodium Dodecyl ◽  
Gel Filtration ◽  
Subunit Structure ◽  
Molecular Weights ◽  
Subunit Molecular Weight ◽  
Disulphide Bonds ◽  
Terminal Amino ◽  
Urinary Glycoprotein

1. Subunit molecular weights of 76000–82000 were obtained for native and alkylated Tamm–Horsfall glycoprotein by gel filtration on Sephadex G-200 in the presence of sodium dodecyl sulphate. 2. A further estimate of the subunit molecular weight of 79000±4000 was obtained by disc gel electrophoresis in sodium dodecyl sulphate. 3. A minimum value of the chemical molecular weight of 79000±6000 was obtained from the number of N-terminal amino acids released by cyanogen bromide cleavage of the glycoprotein. 4. Similar values were obtained for the subunit molecular weight of Tamm–Horsfall glycoprotein from patients with cystic fibrosis. 5. On ultracentrifugation both in 1.0% sodium dodecyl sulphate and in 70% formic acid, Tamm–Horsfall glycoprotein sedimented as a single component, slightly faster than serum albumin. 6. On reduction of the disulphide bonds the same subunit molecular weight was obtained, which suggested that these bonds are intrachain.

scholarly journals Purification and properties of molecular-weight variants of human placental alkaline phosphatase

1968 ◽  
Vol 108 (5) ◽  
pp. 779-792 ◽  
Author(s):  
Nimai K. Ghosh ◽  
William H. Fishman
Keyword(s):  
Molecular Weight ◽  
Alkaline Phosphatase ◽  
Large Scale ◽  
Equilibrium Dialysis ◽  
Gel Filtration ◽  
Sedimentation Coefficient ◽  
Exchange Chromatography ◽  
Placental Alkaline Phosphatase ◽  
Ph Optimum ◽  
Starch Gel

1. Alkaline phosphatase of human placenta was purified by a procedure involving homogenization with tris buffer, pH8·6, extraction with butanol, ammonium sulphate fractionation, exposure to heat, ethanol fractionation, gel filtration, triethylaminoethylcellulose anion-exchange chromatography, continuous curtain electrophoresis on paper and equilibrium dialysis. Methods for both laboratory-scale and large-scale preparation were devised. 2. Two major molecular-weight variants designated A and B were separated by molecular sieving with Sephadex G-200 and variant A was purified 4000-fold. 3. Variant B, which comes off the Sephadex G-200 column before variant A, is the electrophoretically slower-moving species on starch gel and is quite heterogeneous. 4. Purified variant A was fairly homogeneous on the basis of electrophoretic studies on starch gel and Sephadex gel, ultracentrifugation and immunodiffusion. 5. The respective molecular weights for variants A and B were 70000 and over 200000 on the basis of sucrose-density-gradient ultracentrifugation. Variant A exhibited a sedimentation coefficient of 4·2s. 6. Crystalline variant B could be converted into fast-moving variant A and vice versa. 7. Kinetic studies indicated no difference between the two variants. These include linear rates of hydrolysis, pH optimum, Michaelis constants and uncompetitive stereospecific l-phenylalanine inhibition. 8. The amino acid compositions of variants A and B and of placental albumin were determined.

Sign in / Sign up

Export Citation Format

Share Document