scholarly journals Medical image interpretation training with a low‐cost eye tracking and feedback system: A preliminary study

Author(s):  
Mathieson Tan Zui Quen ◽  
J. Mountstephens ◽  
Yong Guang Teh ◽  
J. Teo
2018 ◽  
Author(s):  
Laura E. McLaughlin ◽  
Raymond Robert Bond ◽  
Jonathan McConnell ◽  
Ciara M Hughes ◽  
Sonyia L McFadden

Healthcare ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 10
Author(s):  
Chong-Bin Tsai ◽  
Wei-Yu Hung ◽  
Wei-Yen Hsu

Optokinetic nystagmus (OKN) is an involuntary eye movement induced by motion of a large proportion of the visual field. It consists of a “slow phase (SP)” with eye movements in the same direction as the movement of the pattern and a “fast phase (FP)” with saccadic eye movements in the opposite direction. Study of OKN can reveal valuable information in ophthalmology, neurology and psychology. However, the current commercially available high-resolution and research-grade eye tracker is usually expensive. Methods & Results: We developed a novel fast and effective system combined with a low-cost eye tracking device to accurately quantitatively measure OKN eye movement. Conclusions: The experimental results indicate that the proposed method achieves fast and promising results in comparisons with several traditional approaches.


Author(s):  
Chiwon Ahn ◽  
Seungjae Lee ◽  
Jongshill Lee ◽  
Jaehoon Oh ◽  
Yeongtak Song ◽  
...  

This study aimed to assess the effectiveness of a novel chest compression (CC) smart-ring-based feedback system in a manikin simulation. In this randomized, crossover, controlled study, we evaluated the effect of smart-ring CC feedback on cardiopulmonary resuscitation (CPR). The learnability and usability of the tool were evaluated with the System Usability Scale (SUS). Participants were divided into two groups and each performed CCs with and without feedback 2 weeks apart, using different orders. The primary outcome was compression depth; the proportion of accurate-depth (5–6 cm) CCs, CC rate, and the proportion of complete CCs (≤1 cm of residual leaning) were assessed additionally. The feedback group and the non-feedback group showed significant differences in compression depth (52.1 (46.3–54.8) vs. 47.1 (40.5–49.9) mm, p = 0.021). The proportion of accurate-depth CCs was significantly higher in the interventional than in the control condition (88.7 (30.0–99.1) vs. 22.6 (0.0–58.5%), p = 0.033). The mean SUS score was 83.9 ± 8.7 points. The acceptability ranges were ‘acceptable’, and the adjective rating was ‘excellent’. CCs with smart-ring feedback could help achieve the ideal range of depth during CPR. The smart-ring may be a valuable source of CPR feedback.


2012 ◽  
Vol 433-440 ◽  
pp. 5611-5615
Author(s):  
Jian Sheng Hu

Aimed at the problem of the embedded multi-channel video acquisition and display system, a new one based on FPGA is put forward. The configuration of the system is given. The principle and key issue is analyzed. Using of the state shift mechanism, t the controlling time sequence signals of TFT-LCD are produced; The synchronization among multi-channel video acquisition is realized by using time-division multiplexing technology; The problem of conflict between reading and writing frame cache is solved through the two SRAM switch; The frames composition technology is applied to accomplish the change from interlaced scanning to progressive scanning. The result of project application shows the virtues of system, such as good effect of acquisition and display, low cost and low power consumption.


2014 ◽  
Vol 607 ◽  
pp. 791-794 ◽  
Author(s):  
Wei Kang Tey ◽  
Che Fai Yeong ◽  
Yip Loon Seow ◽  
Eileen Lee Ming Su ◽  
Swee Ho Tang

Omnidirectional mobile robot has gained popularity among researchers. However, omnidirectional mobile robot is rarely been applied in industry field especially in the factory which is relatively more dynamic than normal research setting condition. Hence, it is very important to have a stable yet reliable feedback system to allow a more efficient and better performance controller on the robot. In order to ensure the reliability of the robot, many of the researchers use high cost solution in the feedback of the robot. For example, there are researchers use global camera as feedback. This solution has increases the cost of the robot setup fee to a relatively high amount. The setup system is also hard to modify and lack of flexibility. In this paper, a novel sensor fusion technique is proposed and the result is discussed.


Sign in / Sign up

Export Citation Format

Share Document