3D UV-microforming: a low-cost new technology for surface micromachining

1997 ◽  
Author(s):  
W. Qu
Keyword(s):  
Low Cost ◽  
New Technology ◽  
Surface Micromachining

The Forties and Brimmond Fields, Blocks 21/10, 22/6a, UK North Sea

2003 ◽  
Vol 20 (1) ◽  
pp. 557-561 ◽  
Author(s):  
A. Carter ◽  
J. Heale
Keyword(s):  
North Sea ◽  
Low Cost ◽  
New Technology ◽  
Horizontal Wells ◽  
Oil Price ◽  
3D Seismic ◽  
Rotary Drilling ◽  
Geological Society ◽  
Recoverable Reserves ◽  
Infill Drilling

AbstractThis paper updates the earlier account of the Forties Field detailed in Geological Society Memoir 14 (Wills 1991), and gives a brief description of the Brimmond Field, a small Eocene accumulation overlying Forties (Fig. 1).The Forties Field is located 180 km ENE of Aberdeen. It was discovered in 1970 by well 21/10-1 which encountered 119 m of oil bearing Paleocene sands at a depth of 2131 m sub-sea. A five well appraisal programme confirmed the presence of a major discovery including an extension into Block 22/6 to the southeast. Oil-in-place was estimated to be 4600 MMSTB with recoverable reserves of 1800 MM STB. The field was brought onto production in September 1975. Plateau production of 500 MBOD was reached in 1978, declining from 1981 to 77 MBOD in 1999.In September 1992 a programme of infill drilling commenced, which continues today. The earlier infill targets were identified using 3D seismic acquired in 1988. Acquisition of a further 3D survey in 1996 has allowed the infill drilling programme to continue with new seismic imaging of lithology, fluids and saturation changes. The performance of the 1997 drilling showed that high step-out and new technology wells, including multi-lateral and horizontal wells, did not deliver significantly better targets than drilling in previous years.In line with smaller targets, and in the current oil price environment, low cost technology is being developed through the 1999 drilling programme. Through Tubing Rotary Drilling (TTRD) is currently seen as the most promising way of achieving a step

INFLUENCE OF LOW-COST BUILDING MATERIALS ON HOUSING PROJECT IN REDUCTION OF HOUSING DEFICIT IN NAIROBI CITY COUNTY, KENYA

2019 ◽  
Vol 4 (2) ◽  
pp. 23-37
Author(s):  
Kamau Maina ◽  
Dr. Samson Nyang’au Paul
Keyword(s):  
Transformational Leadership ◽  
Real Estate ◽  
Building Materials ◽  
Low Cost ◽  
New Technology ◽  
Labour Productivity ◽  
Reliability And Validity ◽  
Value Theory ◽  
Modern Technology ◽  
Primary Data

Purpose: The purpose of the study was to explore the influence of low cost building materials on reduction of housing deficit in Nairobi County, Kenya.Methodology: The study adopted four theories: open innovations theory, the value theory, transformational leadership theory, and institutional theory. Methodologically, the study adopted a descriptive research design, while the population of this study was all the real estate firms registered by Kenya Property Developers Association (KPDA). Census technique was employed to collect data from all 69 real estate firms using questionnaires. Questionnaires were applied to collect primary data, where the researcher trained research assistants to aid the data collection procedure. A pilot-test was conducted as an approach to establishing both the reliability and validity assessments of the questionnaire. Statistical packages for social sciences (SPSS) was used to undertake both descriptive and inferential statistical computations.Results: The findings of the study established that the use of technology enhances the capability and capacity of construction firms to use an array of building materials. The study found that use of modern technology defined skilled labour because most organizations are leveraging technology as a basis of realizing competitive advantage. It also established that real estate firms utilize competent based human resource management firms to hire qualified personnel. In addition, it was evident that personality traits influenced adoption of new technology in the construction of low cost housing, whereas knowledge and attitudes, and skills were significantly attributed to adoption of new technology.Unique contribution to theory, practice and policy: In light of the research findings, the study recommends that organizations should leverage modern technology as a basis of realizing efficiency, effectiveness, and sustainability of projects. The study likewise recommends that organizations should build capacities to enhance labour productivity. In addition, the study recommends that organizations should adopt transformational leadership approaches as a basis of enhancing performance. The study recommends the need to revise the legal framework with a view to ensure that it reflects the changing needs of the project requirements.

scholarly journals Determinants of Adoption of New Technology in Telecom Sector: A Structural Equation Modeling Approach

2018 ◽  
Vol 20 (1) ◽  
pp. 166-178 ◽  
Author(s):  
Susmita Chatterjee ◽  
Bibek Ray Chaudhuri ◽  
Debabrata Dutta
Keyword(s):  
Structural Equation Modeling ◽  
Mobile Communications ◽  
Structural Equation ◽  
Low Cost ◽  
New Technology ◽  
Equation Modeling ◽  
Technology Standards ◽  
Technology Standard ◽  
The Usa ◽  
Adoption Of New Technology

In this article, we look at the determinants of the new technology adoption by consumers in the case of mobile telecommunications. The dynamic nature of the telecom industry is a result of the frequent technological change. Consumers witness different technology standards in mobile communications, starting from the first generation (1G) to second generation (2G) subsequently to third (3G) and now experiencing fourth (4G) in some countries such as Norway, Sweden, South Korea, and the USA including ours. The movement from one standard to the other has been predicted to be smooth as all of them are vertical substitutes for each other. Given the various dimensions such as price, requirements, utility and so on, these technology standards are not perfect substitutes. The article investigates the prospect of a new technology standard roll out in India. A survey of 400 mobile phone customers in metro telecom circles has been carried out for this purpose. The study applies structural equation modeling (SEM) and explores the adoption intention of this new technology among the respondents. Results show that the presence of low-cost alternatives that is the availability of a lower technology standard poses a significant hurdle to the adoption of new technology services.

scholarly journals A Modular Toolkit to Fabricate Microfluidic Devices for 3D Cell Culture and Near Real-time Measurements

2020 ◽  
Author(s):  
Giraso Kabandana ◽  
Adam Michael Ratajczak ◽  
Chengpeng Chen
Keyword(s):  
Cell Culture ◽  
Real Time ◽  
Low Cost ◽  
New Technology ◽  
Microfluidic Channel ◽  
3D Cell Culture ◽  
Microfluidic Devices ◽  
In Vitro Cell Cultures ◽  
Scoring Tools

Microfluidic technology has tremendously facilitated the development of in vitro cell cultures and studies. Conventionally, microfluidic devices are fabricated with extensive facilities by well-trained researchers, which hinders the widespread adoption of the technology for broader applications. Enlightened by the fact that low-cost microbore tubing is a natural microfluidic channel, we developed a series of adaptors in a toolkit that can twine, connect, organize, and configure the tubing to produce functional microfluidic units. Three subsets of the toolkit were thoroughly developed: the tubing and scoring tools, the flow adaptors, and the 3D cell culture suite. To demonstrate the usefulness and versatility of the toolkit, we assembled a microfluidic device and successfully applied it for 3D macrophage cultures, flow-based stimulation, and automated near real-time quantitation with new knowledge generated. Overall, we present a new technology that allows simple, fast, and robust assembly of customizable and scalable microfluidic devices with minimal facilities, which is broadly applicable to research that needs or could be enhanced by microfluidics.

scholarly journals An analysis of Approaches for Desktop Virtualization and Challenges

2021 ◽  
pp. 600-612
Author(s):  
Rupesh Kumar ◽  
Arun Kumar Yadav ◽  
H N Verma
Keyword(s):  
Computer System ◽  
Service Providers ◽  
Low Cost ◽  
New Technology ◽  
End Users ◽  
Cloud Services ◽  
Personal Computers ◽  
Small Organizations ◽  
Desktop Virtualization ◽  
Virtual Desktop

In the Information Technology world, cloud computing technology offering unlimited amount of IT resources and services to end users over the internet on pay-per-use basis. End users are accessing the cloud services on their mobile or personal computers. Service providers are upgrading their services very frequently to enhance the services, and to use their upgraded services, end users are also required to update the specification of their devices. But it will be very costly for the end users to upgrade their devices for high specification to use the enhanced services. Desktop Virtualization is an extensive technology of cloud services. It is the new concept, in which users can access the virtual desktop of required specifications, software and operating system on their old devices anytime and anywhere. With the help of desktop virtualization, users will be benefited by avoiding the cost of frequent upgradation of mobile or personal computer system. Desktop virtualization technology is proving to be a boon for large and small organizations who have to upgrade their computer system with new technology, which is a very costly and challenging process. Desktop virtualization avoids upgrading the hardware of the client machine repeatedly. It allows us to access all applications and data at a low cost on our old machine. This paper presents the comparative analysis of various approaches for desktop virtualization and various challenges which required the solution. Analysis presented in paper has been done based on various performance parameters which will provide the end users low-cost cloud services and best performance on their mobile or personal computers.

scholarly journals Empowerment and Tech Adoption: Introducing the Treadle Pump Triggers Farmers’ Innovation in Eastern Ethiopia

2018 ◽  
Author(s):  
Shimelis Beyene ◽  
Teshome Regassa ◽  
Belaineh Legesse ◽  
Martha Mamo ◽  
Tsegaye Tadesse
Keyword(s):  
Low Cost ◽  
New Technology ◽  
Labor Demand ◽  
Pilot Project ◽  
External Support ◽  
Small Scale ◽  
Eastern Ethiopia ◽  
Well Drilling ◽  
Community Ownership ◽  
Technology Introduction

In 2013, thirty-eight treadle pumps (TPs) were installed as low-cost technology introduction for small-scale irrigation in eastern Ethiopia. The pilot project also included training of selected farmers on well excavation, installation and maintenance of pumps. In June 2015, researchers visited nine of the 38 TP sites, and found only two functional TPs. The rest were replaced with a new technology. Farmers who adopted the new technology stated that the limited water output and high labor demand of the conventional TP did not optimally fulfil their irrigation water requirements. The new hybrid technologies have spread quickly to more than one hundred households due to three key factors. First, farmers’ innovative modifications of the initial excavation technique addressed the discharge limitations of the conventional TP by excavating boreholes with wider diameter. Second, community ownership of the new technology, including local skills used in well drilling and fabricating excavation implement, made the new irrigation technology affordable and accessible to a higher number of households, leading to faster diffusion of the technology. Third, this innovation has spread organically without any external support. Adoption of the new technology enabled some farmers to accumulate enough resources to diversify their livelihoods into non-farm activities.

scholarly journals Uses of different techniques for the production of sustainable soil and food

2020 ◽  
Vol 2 (4) ◽  
Author(s):  
Sahrish Khan ◽  
Abdul Waris
Keyword(s):  
Adverse Effect ◽  
Disease Management ◽  
Soil Fertility ◽  
Crop Production ◽  
Soil Structure ◽  
Low Cost ◽  
New Technology ◽  
Management Strategies ◽  
Soil Condition ◽  
Plant Disease Management

Due to increase in the population which is estimated that the human papulation will increased 9.7 billion in 2050. There is also increase the demands of the food productions. That’s why there is need to solve the problems regarding to the production of the food. Major problem of the food production is the shortage of the land due to the low and bad soil structure and quality of the soil. Soil erosion is one of the main issue which is caused  due to the used of different chemicals, pesticides and fertilizers which are mainly used for the  plant growth and protection but they are the main reasons of the production of the pollution in the soil. There is need of the different new technology for the improvement of the soil structure, quality, its fertility and decontamination of pollution from the soil which are eco-friendly to the environment and have no adverse effect. In this study the role of the different techniques in which genetic engineering, Nano technologies, soil and crop management strategies, integrated pest control management strategies, sustainable remediation techniques, microbial management strategies and the different management stairgates. All these techniques aim to the production of the plants and microbes which are effective against plant disease management. The aim of the use nano agrochemicals and nano sensors for sensing environmental and pathogen conditions against disease management. The aim of the paper to provide the production of the disease resistance plant and the provide balanced nutrients supplements to the soil for the improvement of the soil condition and its fertility. These techniques have economic importance due to the use of the nano agrochemicals which are low cost and have effective and reduce the use of the chemicals substances which have negative effect on the  soil fertility.. There are sustainable remediations techniques also discussed which are used for the decontamination of the soil pollution. In this study the main focus on the improve and increase soil fertility which enhance the growth of the plants as well the production of the crop production. The production of the stress and degradation resistance microbes which is important factor for the protection of the soil from degradation or contamination. All the techniques which are used in this paper have no adverse effect they are helpful in the tolerance of the stress conditions.

Internet Advertising Strategies

2012 ◽  
pp. 140-158
Keyword(s):  
Online Advertising ◽  
Low Cost ◽  
New Technology ◽  
Integrated Model ◽  
New Method ◽  
Internet Advertising ◽  
Behavioral Reaction ◽  
Broad Concept ◽  
Advertising Strategies ◽  
Fast Access

Advertising is a broad concept; in this book, the authors have presented a precise look at its practical domains. Modern advertising has become low-cost with fast access to target users, transferring a persuasive concept to customers and getting a positive behavioral reaction. The last part of their definition is indicative of a new method of advertising, which goes a step further than other methods. A positive reaction embedded in an advertising function comes from advertisers’ use of new communicational practices to transfer and receive messages. The emergence and application of new technology necessitates using the appropriate tools. In this chapter, the authors first define these new tools (strategies). Then, they discuss the differences between online and traditional advertising strategies, and offer an integrated model of Internet advertising strategies. Finally, the authors introduce different kinds of appropriate Internet advertising strategies. The purpose of this chapter is to focus on online advertising strategies and provide a fundamental understanding of their relationship to marketing practices. They examine why firms must use online advertising strategies and give some examples of how online advertising strategies can help companies make sound marketing decisions.

Role of Telecommunications in Precision Agriculture

2011 ◽  
pp. 252-266
Author(s):  
James M. McKinion
Keyword(s):  
Precision Agriculture ◽  
Low Cost ◽  
New Technology ◽  
Local Area ◽  
Variable Rate ◽  
Positioning Systems ◽  
Storage And Retrieval ◽  
Data Files ◽  
Commercial Sources

Precision agriculture has been made possible by the confluence of several technologies: geographic positioning systems, geographic information systems, image analysis software, low-cost microcomputerbased variable rate controller/recorders, and precision tractor guidance systems. While these technologies have made precision agriculture possible, there are still major obstacles which must be overcome to make this new technology accepted and usable. Most growers will not do image processing and development of prescription maps themselves but will rely upon commercial sources. There still remains the challenge of storage and retrieval of multi-megabytes of data files for each field, and this problem will only continue to grow year by year. This chapter will discuss the various wireless technologies which are currently being used on three proof-of-concept farms or areas in Mississippi, the various data/ information intensive precision agriculture applications which use wireless local area networking and Internet access, and the next generation technologies which can immensely propel precision agriculture to widespread use in all of agriculture.

High Value Thin Wafer Support Technology for 3DIC

2014 ◽  
Vol 2014 (1) ◽  
pp. 000718-000723
Author(s):  
Jared Pettit ◽  
Alman Law ◽  
Alex Brewer ◽  
John Moore
Keyword(s):  
Adhesion Force ◽  
Low Cost ◽  
New Technology ◽  
Value Added ◽  
Batch Process ◽  
New Approach ◽  
Wide Range ◽  
Temporary Bonding ◽  
Technical Challenges ◽  
Conventional Practice

As the 3DIC market matures, more is understood about the technical and cost challenges [1]. At the 2013 Semicon-West gathering, a panel of global experts identified these technical challenges to represent some of the most significant barriers to the industry's efforts to maintain progress with Moore's Law [2]. Searching and achieving high value manufacturing of 3DIC devices requires wrestling with several technologies and processes, all which may assert a different value for the manufacturer [3]. Current technologies for thin wafer support use a wide range of adhesives applied to the device wafer, bonded to a carrier, backside processed, and de-bonded by an array of methods. Daetec has been investigating temporary bonding for nearly 15yrs, is producing a range of products for semiconductor (e.g. WaferBondTM (Brewer-Science, Inc.)) [4], and for the display market using a low-cost tunable adhesion-force material that is peeled by simple means [5]. Daetec has developed a new technology, DaeBond 3DTM, allowing de-bonding to occur in a batch process while thinned wafers are affixed to film frames. This new approach provides a shift in conventional practice. Our paper presents several temporary bonding options with DaeBond 3DTM in an effort to define value-added approaches for thin wafer handling.

Sign in / Sign up

Export Citation Format

Share Document