scholarly journals Dynamic Response of a Long-Span Concrete-Filled Steel Tube Tied Arch Bridge and the Riding Comfort of Monorail Trains

2018 ◽  
Vol 8 (4) ◽  
pp. 650 ◽  
Author(s):  
Hongye Gou ◽  
Wen Zhou ◽  
Changwei Yang ◽  
Yi Bao ◽  
Qianhui Pu
Keyword(s):  
Dynamic Response ◽  
Steel Tube ◽  
Arch Bridge ◽  
Concrete Filled Steel Tube ◽  
Long Span ◽  
Tied Arch Bridge

Dynamic Analysis of Steel Tube and Concrete-Filled Steel Tube High-Limit Protection Racks under Impact Loads

2011 ◽  
Vol 194-196 ◽  
pp. 1924-1928
Author(s):  
Ao Tian Ju ◽  
Shu Ying Qu ◽  
Xing Min Hou ◽  
Jin Tian Wang
Keyword(s):  
Energy Transfer ◽  
Dynamic Response ◽  
Impact Force ◽  
Internal Force ◽  
Steel Tube ◽  
Good Effect ◽  
Impact Loads ◽  
Railway Bridge ◽  
Concrete Filled Steel Tube ◽  
Limit Protection

The purpose of high-limit protection rack under railway bridge is to protect railway bridge, and avoid passing vehicles under railway bridge colliding bridge. The paper discusses dynamic response and energy transfer of two different structures by analyzing the internal force, deformation, displacement and energy transfer of the steel tube and concrete-filled steel tube protection racks in collision. The result shows that the displacement of concrete-filled steel tube protection rack is smaller, and it can bear larger impact force and have good effect of energy absorption.

Dynamic Response of a Heterotypic Concrete Filled Steel Tube Arch Bridge Subjected to Moving Vehicles

2011 ◽  
Vol 255-260 ◽  
pp. 1696-1700
Author(s):  
Yan Li ◽  
Xin Yi Huang
Keyword(s):  
Surface Roughness ◽  
Dynamic Response ◽  
Impact Factor ◽  
Damping Ratio ◽  
Steel Tube ◽  
Impact Factors ◽  
Arch Bridge ◽  
Concrete Filled Steel Tube ◽  
Moving Vehicles ◽  
The Impact

As a new type structure, the dynamic behavior of the irregular concrete filled steel tube arch bridge under moving vehicles was rarely studied. In this paper, taking the bridge crossing Yitong river in Changchun of China as an example, the dynamic response of the bridge is investigated by the self-compiling vehicle-bridge coupled vibration analysis program. The surface roughness and vehicle speed are considered in the analysis. The results show that impact factors of the bridge increase as surface roughness deteriorated; the impact factor varies obviously for the different component; the tension impact factor of the short suspender is larger than that of long ones; damping ratio of structure has little effect on the impact factors. The research conclusions can be referred in the design and assessment for the similar bridges.

Influence of Hoop Coefficient on Dynamic Response of Railway Bridge Protective Frame under Impact Load

2011 ◽  
Vol 291-294 ◽  
pp. 1321-1326
Author(s):  
Ao Tian Ju ◽  
Shu Ying Qu ◽  
Xing Min Hou ◽  
Jin Tian Wang
Keyword(s):  
Dynamic Response ◽  
Wall Thickness ◽  
Tube Wall ◽  
Impact Load ◽  
Steel Tube ◽  
Railway Bridge ◽  
Concrete Filled Steel Tube ◽  
Tube Wall Thickness ◽  
Average Impact ◽  
Tube Structure

The paper analyzes that hoop coefficients of the concrete-filled steel tube influence on dynamic response of the railway bridge height limit protective frame under impact load by using ANSYS/LS-DYNA. Change hoop coefficient of the concrete-filled steel tube structure by changing steel tube wall thickness. The result shows that with increase of steel tube wall thickness, the average impact force of protective frame will increase and the displacement and deformation will reduce, and protective frame can resist greater impact load. It will provide the reference for design of railway bridge height limit protective frame.

scholarly journals Research on Dynamic Response of Concrete-Filled Steel Tube Columns Confined with FRP under Blast Loading

2019 ◽  
Vol 2019 ◽  
pp. 1-18 ◽  
Author(s):  
Jing Dong ◽  
Junhai Zhao ◽  
Dongfang Zhang ◽  
Yingping Li
Keyword(s):  
Numerical Model ◽  
Dynamic Response ◽  
Blast Resistance ◽  
Concrete Strength ◽  
Blast Loading ◽  
Steel Tube ◽  
Element Analysis ◽  
Concrete Filled Steel Tube ◽  
Static Performance ◽  
New Type

Recently, a concrete-filled steel tube confined with fiber-reinforced polymer (FRP) has become a hot research issue as a new type of structure. These studies mainly focus on its static performance and seismic and impact behaviour, with little research on its blast resistance performance. In this study, the dynamic response of concrete-filled steel tube columns confined with FRP under blast loading was investigated. Numerical analysis was implemented using multimaterial ALE method in the finite element analysis program LS-DYNA. The proposed numerical model was validated by the SDOF result and available experimental data. And the effects of the number of FRP layers, concrete strength, and cross section were also discussed in detail based on the proposed numerical model. The results indicate that the constraints of FRP effectively enhance the blast resistance of the column, and the vulnerable parts mainly occur at the middle and two ends of the column. The blast resistance of the column can be enhanced by increasing the number of FRP layers or concrete strength. These results could provide a certain basis for blast resistance design of concrete-filled steel tubes confined with FRP.

Vertical Dynamic Response of a Concrete Filled Steel Tube due to Transient Impact Load: Analytical Solution

2016 ◽  
Vol 16 (01) ◽  
pp. 1640014 ◽  
Author(s):  
Xuanming Ding ◽  
Yuming Fan ◽  
Ping Li ◽  
Gangqiang Kong
Keyword(s):  
Analytical Solution ◽  
Dynamic Response ◽  
Wave Equations ◽  
Impact Load ◽  
Separation Of Variables ◽  
Three Dimensional ◽  
Vertical Displacement ◽  
Steel Tube ◽  
Concrete Filled Steel Tube ◽  
The Impact

This paper presents an analytical solution of vertical dynamic response of a concrete-filled steel tube (CFST) due to transient impact loading. Both the concrete and steel are modeled by linear elastic material. The impact load is simulated by a semisinusoidal impulse. Three-dimensional (3D) wave equations those considering the vertical displacement are established. By combining the initial and boundary conditions, the frequency-domain analytical solution of displacement is deduced by Laplace transformation and separation of variables methods. The time-domain dynamic response is then obtained by numerical inverse Fourier transformation (IFT). Numerical examples are presented to verify the validity of the analytical solution developed in this study. The results indicate that the analytical solution proposed in this study shows good consistence with the existing solutions.

Numerical Simulation of Square Steel Tube Beam Filled with Steel-Reinforced High-Strength Concrete Dynamic Response under Impact Load

2011 ◽  
Vol 94-96 ◽  
pp. 2084-2087 ◽  
Author(s):  
Shun Bo Li ◽  
Jun Yang ◽  
Chen Xi Xia ◽  
Da Yong Chen
Keyword(s):  
Numerical Simulation ◽  
Dynamic Response ◽  
High Strength Concrete ◽  
Impact Load ◽  
High Strength ◽  
Steel Tube ◽  
Stress Wave Propagation ◽  
Strength Concrete ◽  
Combined Action ◽  
Square Steel Tube

Using ANSYS / LS-DYNA to study the dynamic response of square steel tube beam filled with steel-reinforced high-strength concrete under impact loading at different speeds. The numerical simulation results show that: At different conditions of speed, the concrete failure modes are different. The combined action of Steel tube and steel flange makes the stress wave propagation extremely complex in the beam, when the speed increased to a certain value, it made damage to the internal steel flange and flange lateral concrete under impact load, while the concrete between the top of steel flange and steel tube was protected by the combined action.

Sign in / Sign up

Export Citation Format

Share Document