scholarly journals Estimating emission from gas power plant in palembang, indonesia using direct and indirect methods

2018 ◽  
Vol 67 ◽  
pp. 02037
Author(s):  
Gabriel Andari Kristanto ◽  
Alditho Farrasi Anantoputra
Keyword(s):  
Power Plant ◽  
Emission Factor ◽  
Indirect Method ◽  
Emission Inventory ◽  
Direct Method ◽  
Total Particulate Matter ◽  
Indirect Methods ◽  
Gas Power Plant ◽  
A Direct Method ◽  
Direct And Indirect Methods

Nowadays, almost every daily activity is supported by the availability of energy, especially electricity. As the Borang 60 MW Gas Power Plant in Palembang, Indonesia emits air pollutants such as SO2, NOx, CO, and total particulate matter (total PM), an emission inventory needs to be developed. Various methods can be used in the inventory of emissions; among others are a direct method based on direct measurement and an indirect method which involves the calculation of total emissions by emission factor. This study aims to estimate the emissions from the gas power plant in Palembang using direct and indirect methods and analyze the most suitable emission factor for Indonesian conditions. The comparison between emissions measured by direct and indirect methods found that the indirect method using the emission factor of AP-42 gives more accurate results for SO2 and NOx, whereas the total emission of CO is more accurately calculated based on the indirect method using the emission factor developed by Kurokawa et al. (2013); the median value of total PM is more accurately calculated based on the indirect method using the emission factor developed by the IPCC.

scholarly journals The usefulness of operating cash flow information: Does format matter?

2012 ◽  
Vol 10 (1) ◽  
pp. 44-52 ◽  
Author(s):  
Shadi Farshadfar
Keyword(s):  
Cash Flow ◽  
Indirect Method ◽  
Direct Method ◽  
Cash Flows ◽  
Indirect Methods ◽  
Flow Information ◽  
Operating Cash Flow ◽  
Future Cash Flows ◽  
Direct And Indirect Methods ◽  
Level Analysis

This study investigates whether the direct method of presenting cash flows from operations is superior to the indirect method in its ability to forecast future cash flows. It also considers the effect of industry characteristics on the relative usefulness of direct and indirect methods of cash flow presentation. The study, which uses a sample of Australian firms, finds that both the direct and indirect methods improve the forecast of future cash flows. However, the indirect method of reporting cash flows from operations is more relevant than the direct method in predicting future cash flows. Evidence from the industry-level analysis overall reinforces the main results.

scholarly journals A Comparative Evaluation of the Marginal and Internal Fit of Laboratory-fabricated Monolithic Zirconia Crowns using Direct and Indirect Methods of Scanning: An in vitro Study

2017 ◽  
Vol 7 (1) ◽  
pp. 22-27
Author(s):  
Kushal N Gandhi
Keyword(s):  
Stainless Steel ◽  
Indirect Method ◽  
Direct Method ◽  
Indirect Methods ◽  
Zirconia Crowns ◽  
Monolithic Zirconia ◽  
The Mean ◽  
Internal Fit ◽  
Direct And Indirect Methods

ABSTRACT Aim To evaluate the marginal and internal fit of laboratoryfabricated monolithic zirconia crowns using direct and indirect methods of scanning. Materials and methods A stainless steel master model was selected, which included stainless steel die, outer cap, and inner cap. The study was divided into two groups. In group I, direct method of scanning was carried out in which the stainless steel die was scanned directly with chairside scanner, and in group II, impression of the stainless steel die was made and gypsum die was fabricated, which was then subjected to scanning. Zirconia blanks or blocks were milled, sintered, and polished to obtain 10 zirconia crowns of each group. Replica technique was used to evaluate fit of crowns by using light body as cement analog. The crowns were then sectioned, viewed under a stereomicroscope, and each predetermined region was measured and evaluated for marginal and internal fit. Results The descriptive statistics showed that the mean marginal fit for indirect method was higher compared with that for direct method. The results of paired-sample t-test revealed that mean marginal and internal fit for indirect method was on the upper side of the scale, whereas the mean for the direct method is on the lower side of the scale. Thus, the difference in the means of two methods was quite large and likely to be significant. Conclusion The results did show better marginal and internal fit in crowns fabricated by the direct method; however, the crowns fabricated by the indirect method had more discrepancy, but were in the clinically acceptable limit. Clinical significance The present study would serve as a useful guide in deciding which method of scanning would give a better marginal and internal fit of monolithic zirconia crowns for longevity of restorations. How to cite this article Gandhi KN, Ram SM. A Comparative Evaluation of the Marginal and Internal Fit of Laboratory-fabricated Monolithic Zirconia Crowns using Direct and Indirect Methods of Scanning: An in vitro Study. J Contemp Dent 2017;7(1):22-27.

scholarly journals Analisa Eisiensi Economizer Terhadap Boiler (Gas Dan Solar) Di PT. Spindo III, Tbk

2018 ◽  
Vol 2 (2) ◽  
pp. 99
Author(s):  
Finus Ainun ◽  
Jamaaluddin Jamaaluddin
Keyword(s):  
Indirect Method ◽  
Direct Method ◽  
Pipe Production ◽  
Feed Water ◽  
Average Yield ◽  
Indirect Methods ◽  
A Direct Method ◽  
Galvanize Pipe ◽  
Boiler Feed Water

The role of boiler machines at PT. SPINDO in the galvanize pipe production process is very important, where the steam produced by the fire tube boiler machine is directly distributed into the blow system for the cleaning of the remaining galvanic in the pipe and heating the water for pipe washing. To determine the efficiency of the boiler, a direct method is used to analyze the efficiency of boiler machines and indirect methods as a way of calculating the amount of efficiency if an economizer is installed. The efficiency of diesel-fueled boilers using the direct method yields an average yield of 40.7% (forty point seven percent) and 45.84% (forty five point eighty four percent) for gas-fired boilers. However, by using an indirect method, efficiency if installed economizer is obtained at 85.55% (eighty five point fifty five percent) for diesel-fueled boilers with a capacity of 5 tons and 81.76% (eighty one point seventy six percent) of the efficiency of a gas-fired boiler with a capacity of 2 (two) tons. Efficiency improvements can also be done in many ways, including maintenance of a good and scheduled boiler machine for good boiler feed water treatment.  

scholarly journals The Preference of Direct or Indirect Methods in Preparing the Statement of Cash Flows in Decision Making: An Academic Perspective

2016 ◽  
Vol 8 (2) ◽  
pp. 206
Author(s):  
Abdullah, S. Hardan ◽  
Majed, A. Qabajeh ◽  
Aymen, M. Alshanti
Keyword(s):  
Decision Making ◽  
Indirect Method ◽  
Direct Method ◽  
Cash Flows ◽  
Decision Makers ◽  
Academic Rank ◽  
Indirect Methods ◽  
Statement Of Cash Flows ◽  
Qualitative Characteristics ◽  
Academic Sector

Two methods are used when reporting cash flows from operating activities: the direct method or the indirect method, both are acceptable from IAS with a preference of direct method. Thus, this paper examines which method of reporting the statement of cash flows provides useful information the decision makers rely on for decision making purposes. To achieve this aim, participants were selected from academic sector represented by universities professors. The study is based on the conceptual framework: qualitative characteristics of accounting information. To be useful, information must be relevant and represents faithfully what it claims to represent. In order to distinguish more useful financial information from those less useful, enhancing qualitative characteristics were examined. Results show that academic professors provide support for direct method of reporting cash flows over indirect method. The study sought to determine the effect of academic rank on these results. Evidence reveals that full and associate professors endorsed the preference of direct method more than assistant professors and lecturers. These results recommend the legislative bodies and entities to adopt the direct method in preparation the statement of cash flows.

Flow Measurement to a Kaplan Turbine Using a Direct Method and an Indirect One

2016 ◽  
Vol 823 ◽  
pp. 361-366
Author(s):  
Ana Maria Budai ◽  
Adrian Cuzmos ◽  
Cristian Fanica ◽  
Damaschin Pepa ◽  
Cosmin Ursoniu ◽  
...  
Keyword(s):  
Direct Measurement ◽  
Flow Rate ◽  
Flow Measurement ◽  
Indirect Method ◽  
Direct Method ◽  
The Other ◽  
Hydropower Plant ◽  
Kaplan Turbine ◽  
A Direct Method

The paper present two different methods for measuring flow in hydropower, one direct and one indirect method. The study consists in comparing the results obtained by measurements made by both methods in a Romanian hydropower plant. The indirect method used is the Winter-Kennedy method. The other method involves direct measurement of the flow rate of water using a specialized outfit in this.

Isoperimetric Problems in the Calculus of Variations

1952 ◽  
Vol 4 ◽  
pp. 257-280 ◽  
Author(s):  
William Karush
Keyword(s):  
Calculus Of Variations ◽  
Classical Theory ◽  
Indirect Method ◽  
Direct Method ◽  
Isoperimetric Problems ◽  
End Points ◽  
Sufficiency Theorems ◽  
Theory Of Fields ◽  
A Direct Method ◽  
Problem Of Bolza

We are concerned with establishing sufficiency theorems for minima of simple integrals of the parametric type in a class of curves with variable end points and satisfying isoperimetric side conditions. The results which are obtained involve no explicit assumptions of normality. Such results can be derived by transforming our problem to a problem of Bolza and using the latest developments in the theory of that problem. More recently [6] an indirect method of proof has been published. Our object is to present a direct method of proof without transformation of the problem which is based upon a generalization of the classical theory of fields.

Direct and Indirect Methods for Calculating Thermal Emission From Layered Structures With Nonuniform Temperatures

2011 ◽  
Vol 133 (7) ◽  
Author(s):  
L. P. Wang ◽  
S. Basu ◽  
Z. M. Zhang
Keyword(s):  
Temperature Distribution ◽  
Thermal Emission ◽  
Local Density ◽  
Direct Method ◽  
Direct Methods ◽  
Layered Structures ◽  
Nonuniform Temperature ◽  
Indirect Methods ◽  
Nonuniform Temperature Distribution ◽  
Direct And Indirect Methods

The determination of emissivity of layered structures is critical in many applications, such as radiation thermometry, microelectronics, radiative cooling, and energy harvesting. Two different approaches, i.e., the “indirect” and “direct” methods, are commonly used for computing the emissivity of an object. For an opaque surface at a uniform temperature, the indirect method involves calculating the spectral directional-hemispherical reflectance to deduce the spectral directional emissivity based on Kirchhoff’s law. On the other hand, a few studies have used a combination of Maxwell’s equations with the fluctuation-dissipation theorem to directly calculate the emissivity. The present study aims at unifying the direct and indirect methods for calculating the far-field thermal emission from layered structures with a nonuniform temperature distribution. Formulations for both methods are given to illustrate the equivalence between the indirect and the direct methods. Thermal emission from an asymmetric Fabry–Pérot resonance cavity with a nonuniform temperature distribution is taken as an example to show how to predict the intensity, emissivity, and the brightness temperature. The local density of states, however, can only be calculated using the direct method.

scholarly journals Measurement the “Q” angle through the application of direct method and indirect method

2016 ◽  
Vol 33 (03) ◽  
pp. 168-170
Author(s):  
C. Vanzeli ◽  
A. Reis ◽  
A. Pereira ◽  
M. Tavares ◽  
V. Fazan
Keyword(s):  
Direct Method ◽  
Objective Measure ◽  
Angle Measurement ◽  
Global Alignment ◽  
Ordinary People ◽  
Lateral Deviation ◽  
Indirect Methods ◽  
Q Angle ◽  
Direct And Indirect Methods ◽  
Physiotherapy Clinic

Abstract Introduction: The “Q” angle is used to measure global alignment of the kneecap, representing the kneecap normal alignment. The average of 15 degrees in ordinary people is accepted as “Q” angle value, 14 degrees for men and 17 degrees for women. Anatomic changes caused by variants produces converging kneecaps or lateral deviation of the tibial tuberosity, changing the “Q” angle value and causing pathologies. Objective: Measure the “Q” angle of asymptomatic people, comparing obtained results. Materials and Methods: The “Q” angle measurement was taken from 12 subjects (6 males and 6 females), with ages from 18 to 35, at the Physiotherapy Clinic of José do Rosario Vellano College, in Alfenas, MG. Results: After evaluating the 12 subjects following ANOVA test, using p < 0.05, no significant statistic difference could be observed among examiners, gender or right and left limbs, considering both direct and indirect methods. Conclusion: Data obtained in this research allows us suggest that there is no difference between “Q” angle values among genders, direct and indirect methods and lateral symmetry.

scholarly journals Direct Susceptibility Testing of Mycobacterium tuberculosis for Pyrazinamide by Use of the Bactec MGIT 960 System

2016 ◽  
Vol 54 (5) ◽  
pp. 1276-1281 ◽  
Author(s):  
Anne-Marie Demers ◽  
Amour Venter ◽  
Sven O. Friedrich ◽  
Gabriel Rojas-Ponce ◽  
Daniel Mapamba ◽  
...  
Keyword(s):  
Susceptibility Testing ◽  
Direct Method ◽  
Drug Susceptibility ◽  
Drug Susceptibility Testing ◽  
New Drugs ◽  
Indirect Methods ◽  
Future Studies ◽  
Patient Screening ◽  
Phenotypic Methods ◽  
Direct And Indirect Methods

Pyrazinamide (PZA) is a key antituberculosis drug, yet no rapid susceptibility test is commercially available. PZA drug susceptibility testing (DST) was performed directly on sputum samples from 327 patients and compared with the indirect method by using the Bactec MGIT 960 system in the context of patient screening for participation in a drug trial. Compared to standard indirect PZA DST, direct DST was successful in only 59% of cases, but results obtained were highly accurate and available faster. Agreement between the direct and indirect methods varied from 90 to 100% in each laboratory. The median times for obtaining PZA results from the time when the specimen was collected ranged from 11 to 16 days for the direct test and 18 to 95 days for the indirect test across laboratories. The direct method is accurate and reproducible across laboratories. It can be expected to accelerate results in >50% of cases, but it cannot replace indirect DST for PZA. Phenotypic methods remain the gold standard for DST in drug trials. If future studies can optimize the method to decrease the number of uninterpretable results, direct MGIT DST could be the new phenotypic DST standard for clinical trials, providing more rapid detection of resistance to new drugs in experimental regimens.

scholarly journals Comparison of 15N isotope methods to determine the recovery efficiency of nitrogen from green manure

2019 ◽  
Vol 54 ◽  
Author(s):  
Ednaldo da Silva Araújo ◽  
Bárbara Fernanda da Silva ◽  
Emerson Dalla Chieza ◽  
Segundo Urquiaga ◽  
José Guilherme Marinho Guerra ◽  
...  
Keyword(s):  
Isotope Dilution ◽  
Green Manure ◽  
Indirect Method ◽  
Direct Method ◽  
Recovery Efficiency ◽  
Corn Plant ◽  
15N Isotope ◽  
Indirect Methods ◽  
Jack Bean ◽  
Synthetic Fertilizer

Abstract: The objective of this work was to compare three methods of 15N isotope application to the soil in order to determine the recovery efficiency of nitrogen derived from green manure by corn (Zea mays). The used experimental design was a randomized complete block with six replicates. The treatments consisted of three 15N isotope methods: indirect method I, isotope dilution with 15N-labelled synthetic fertilizer applied through a small hole next to each corn plant; indirect method II, isotope dilution with 15N-labelled synthetic fertilizer spread in the furrow next to the corn planting row; and direct method, application of a legume straw as green manure, treated with 2.23% excess 15N. The green manure used was jack bean (Canavalia ensiformis). Applying synthetic 15N to the soil (indirect methods I and II) did not interfere in the estimation of the recovery efficiency of N derived from green manure. The recovery efficiency of N from green manure was 17% for the indirect methods, overestimated when compared with that of 7% for the direct method. The direct method is the most adequate to determine the recovery efficiency of N from green manure.

Sign in / Sign up

Export Citation Format

Share Document