scholarly journals SENSITIVITY ANALYSIS OF PWR SPENT FUEL DUE TO MODELLING PARAMETER UNCERTAINTIES USING SURROGATE MODELS

2021 ◽  
Vol 247 ◽  
pp. 15009
Author(s):  
Bamidele Ebiwonjumi ◽  
Peng Zhang ◽  
Deokjung Lee
Keyword(s):  
Sensitivity Analysis ◽  
Fuel Assembly ◽  
Spent Nuclear Fuel ◽  
Nuclear Data ◽  
Surrogate Models ◽  
Source Terms ◽  
Spent Fuel ◽  
Parameter Uncertainties ◽  
Pressurized Water ◽  
Sensitivity Indices

In the BEPU (Best Estimate Plus Uncertainty) framework, uncertainty quantification (UQ) is a requirement to improve confidence and reliability of code predictions. Over the years, a lot of works have been done to quantify uncertainties in code predictions of spent nuclear fuel (SNF) characteristics due to nuclear data uncertainties. The purpose of this study is to quantify the uncertainty in pressurized water reactor (PWR) fuel assembly radiation source terms (isotopic inventory, activity, decay heat, neutron and gamma source) due to uncertainties in modeling parameters. The deterministic code STREAM is used to predict the source terms of a typical PWR fuel assembly following realistic and detailed irradiation history. For the sensitivity analysis (SA) and UQ, surrogate models are developed based on polynomial chaos expansion (PCE) and variance-based global sensitivity indices (i.e., Sobol’ indices) are employed. The global SA identifies the less important uncertain parameters, showing that the number of uncertain input parameters can be reduced. The surrogate model offers a significantly reduced computational burden even with large number of samples required for the SA/UQ of the model response.

scholarly journals Analyzing Design Considerations for Disassembly of Spent Nuclear Fuel during Head-End Process of Pyroprocessing

2020 ◽  
Vol 2020 ◽  
pp. 1-13
Author(s):  
Young-Hwan Kim ◽  
Yung-Zun Cho
Keyword(s):  
Fuel Assembly ◽  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Scale Up ◽  
High Heat ◽  
Spent Fuel ◽  
Pressurized Water ◽  
Design Considerations ◽  
Nuclear Fuel Assembly ◽  
Cutting Processes

We have developed a practical-scale dry disassembling process to dismantle PWR (Pressurized Water Reactor) spent nuclear fuel assembly in the order of several tens of kilograms of heavy metal/batch to supply rod-cuts (cladding tube and UO2 pellets) for mechanical decladding process. Dry head-end disassembling process has advantages over the wet head-end process because of the lower risk of proliferation and treatment of spent fuel with relatively high heat and radioactivity. This study describes the main design considerations for the disassembling process of the spent nuclear fuel assembly during the dry head-end process. The down-ender, dismantling, extraction, and cutting technologies are analyzed and models have been designed for testing. The purpose of dry head-end disassembly process is to test the main device performance and to obtain scale-up data for practical-scale disassembling. With this in mind, design considerations were analyzed based on remoteness, and basic verification tests were performed. However, the authors used simulated fuel, instead of the actual spent fuel, owing to a lack of joint determination. In addition, in the present study, we did not consider the heat generated from minor actinides or the radioactivity of the fission product; these aspects will be considered in a future study. During the basic test performed in this study, a simulated assembly was completely disassembled using new methods, such as dismantling, extraction, and cutting processes. The practical-scale dry disassembling technology can be tested using scale-up data for reuse of the spent fuel.

Assessment of Radiological Source Term Releases for Potential Severe Accident Scenarios in a PWR SFP

2018 ◽  
Author(s):  
Kwang-Il Ahn ◽  
Jae-Uk Shin
Keyword(s):  
Water Injection ◽  
Severe Accident ◽  
Base Case ◽  
Source Terms ◽  
Spent Fuel ◽  
Fukushima Accident ◽  
Pressurized Water ◽  
Makeup Water ◽  
Accident Scenarios ◽  
The Impact

The primary purpose of this study is to assess the release of source terms into the environment for representative spent fuel pool (SFP) severe accident scenarios in a reference pressurized water reactor (PWR). For this, two typical accident scenarios (loss-of-cooling and loss-of-pool-inventory accidents) and two different reactor operating modes (normal and refueling modes) are considered in the analysis. The secondary purpose of this study is to assess the impact of an emergency makeup water injection strategy, which is one of representative SFP severe accident mitigation (SAM) strategies being employed after the Fukushima accident, upon the release of the radiological source terms. A total of 16 cases, consisting of four base cases and three injection cases for each base case were simulated using the MELCOR1.8.6 SFP version. The, analysis results are given in terms of (a) the key thermal-hydraulic behaviors during an accident progression and (b) releases of radiological fission products (such as Cesium and Iodine) into the environment. In terms of a release of Cesium and Iodine into the environment, the present study show that the two cases subject to a loss of pool inventory (i.e., LOPI-N-03 and LOPI-R-00) lead to the worst results with the respective release fractions of 77.5% and 59.4%.

scholarly journals Preliminary Assessment of Criticality Safety Constraints for Swiss Spent Nuclear Fuel Loading in Disposal Canisters

Materials ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 494
Author(s):  
Alexander Vasiliev ◽  
Jose Herrero ◽  
Marco Pecchia ◽  
Dimitri Rochman ◽  
Hakim Ferroukhi ◽  
...  
Keyword(s):  
Fuel Assembly ◽  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Operating Conditions ◽  
Design Parameters ◽  
Fuel Loading ◽  
Pressurized Water ◽  
Fuel Assemblies ◽  
National Cooperative ◽  
Criticality Safety

This paper presents preliminary criticality safety assessments performed by the Paul Scherrer Institute (PSI) in cooperation with the Swiss National Cooperative for the Disposal of Radioactive Waste (Nagra) for spent nuclear fuel disposal canisters loaded with Swiss Pressurized Water Reactor (PWR) UO2 spent fuel assemblies. The burnup credit application is examined with respect to both existing concepts: taking into account actinides only and taking into account actinides plus fission products. The criticality safety calculations are integrated with uncertainty quantifications that are as detailed as possible, accounting for the uncertainties in the nuclear data used, fuel assembly and disposal canister design parameters and operating conditions, as well as the radiation-induced changes in the fuel assembly geometry. Furthermore, the most penalising axial and radial burnup profiles and the most reactive fuel loading configuration for the canisters were taken into account accordingly. The results of the study are presented with the help of loading curves showing what minimum average fuel assembly burnup is required for the given initial fuel enrichment of fresh fuel assemblies to ensure that the effective neutron multiplication factor, keff, of the canister would comply with the imposed criticality safety criterion.

Integrated Model of Korean Spent Fuel and High Level Waste Disposal Options

2009 ◽  
Author(s):  
Yongsoo Hwang ◽  
Ian Miller
Keyword(s):  
Nuclear Fuel ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Near Field ◽  
Integrated Model ◽  
High Level Waste ◽  
Spent Fuel ◽  
Parameter Uncertainties ◽  
Design Concepts ◽  
High Level

This paper describes an integrated model developed by the Korean Atomic Energy Research Institute (KAERI) to simulate options for disposal of spent nuclear fuel (SNF) and reprocessing products in South Korea. A companion paper (Hwang and Miller, 2009) describes a systems-level model of Korean options for spent nuclear fuel (SNF) management in the 21’st century. The model addresses alternative design concepts for disposal of SNF of different types (CANDU, PWR), high level waste, and fission products arising from a variety of alternative fuel cycle back ends. It uses the GoldSim software to simulate the engineered system, near-field and far-field geosphere, and biosphere, resulting in long-term dose predictions for a variety of receptor groups. The model’s results allow direct comparison of alternative repository design concepts, and identification of key parameter uncertainties and contributors to receptor doses.

scholarly journals Analysis of Some Computer Codes Used for Evaluation of Spent Nuclear Fuel Radiation Parameters

2019 ◽  
pp. 44-50
Author(s):  
A. Smaizys ◽  
E. Narkunas ◽  
V. Rudychev ◽  
Y. Rudychev
Keyword(s):  
Fuel Assembly ◽  
Nuclear Fuel ◽  
Input Data ◽  
Spent Nuclear Fuel ◽  
Operation Time ◽  
Computer Code ◽  
Chemical Compositions ◽  
Spent Fuel ◽  
Management Options ◽  
Computer Codes

The radiation parameters such as radionuclide content and activities, fluxes and energy spectrum of gamma and neutrons of spent nuclear fuel are essential when planning further spent fuel management options – interim wet or dry storage or disposal into a geological repository. Radiation parameters determine the design of a storage or disposal facility, what materials, structures and thicknesses of structures should be used to provide adequate biological shielding. Experimental measurements of spent fuel radiation parameters are rather complicated and expensive, therefore numerical methods are widely used. Various computer codes (APOLLO, BOXER, CASMO, FISPACT, ORIGEN-S, WIMS, etc.) have been developed to simulate the irradiation processes of nuclear fuel and to obtain resulting radiation parameters. Irrespective of the used computer code, the input data firstly must be entered into that code. When simulating nuclear fuel irradiation and burn-up in the reactor core, the geometrical parameters of the fuel assembly, materials’ data (chemical compositions, densities), the operating parameters of the reactor (power, operation time, coolant parameters, etc.) shall be entered into the program as initial data. Fairly often approximations of the input data are performed, for example, fuel rods in a fuel assembly are homogenized and geometrically described as a solid cylinder, the reactor operation time is assumed as continuous and at constant power. The particularity of the input data and accepted assumptions depend on what initial information is available and on the capabilities of the computer code. The modelled spent fuel radiation parameters depend not only on the input data and assumptions, but also on the cross-section databases that are used in computer codes. Computer codes TRITON, ORIGEN-S and FISPACT have been used to model the concentration of actinides and fission products in the spent fuel from the RBMK-1000 reactor. The obtained results are compared and possible reasons for the differences in the modelling results are discussed.

scholarly journals Radiation release characterization of PWR spent fuel assemblies generated from Korean nuclear power plants

2009 ◽  
Vol 24 (3) ◽  
pp. 183-187
Author(s):  
Hyun Moon
Keyword(s):  
Fuel Assembly ◽  
Nuclear Power ◽  
Power Plants ◽  
Spent Nuclear Fuel ◽  
Spent Fuel ◽  
Dose Distributions ◽  
Safe Management ◽  
The Monte Carlo Method ◽  
Photon Dose

Spent nuclear fuel should be kept under safe management until it is disposed of permanently. Because of this, it is important to understand its radiation release characteristics. In this paper, the Monte Carlo method is applied to evaluate the radiation release characteristics of two types of PWR spent fuel assembly generated from the operating plants in Korea: Westinghouse and Korea Standard Nuclear Power Plant. The source terms were calculated using ORIGEN-ARP. The neutron and photon (or gamma) dose distributions along the vertical and horizontal directions of each spent fuel assembly were evaluated using MCNPX code. Compared with the two dose distributions, the photon dose was found to be about 105 times higher than the neutron dose.

scholarly journals Assessment of the Radiotoxicity of Spent Nuclear Fuel from a Fleet of PWR Reactors

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3094
Author(s):  
Mikołaj Oettingen
Keyword(s):  
Isotopic Composition ◽  
Nuclear Fuel ◽  
Nuclear Power ◽  
Spent Nuclear Fuel ◽  
Fuel Cycle ◽  
Spent Fuel ◽  
Pressurized Water ◽  
Hybrid Energy ◽  
Cycle Simulation ◽  
Water Reactors

The paper presents the methodology for the estimation of the long-term actinides radiotoxicity and isotopic composition of spent nuclear fuel from a fleet of Pressurized Water Reactors (PWR). The methodology was developed using three independent numerical tools: the Spent Fuel Isotopic Composition database, the Nuclear Fuel Cycle Simulation System and the Monte Carlo Continuous Energy Burnup Code. The validation of spent fuel isotopic compositions obtained in the numerical modeling was performed using the available experimental data. A nuclear power embarking country benchmark was implemented for the verification and testing of the methodology. The obtained radiotoxicity reaches the reference levels at about 1.3 × 105 years, which is common for the PWR spent nuclear fuel. The presented methodology may be incorporated into a more versatile numerical tool for the modeling of hybrid energy systems.

Sign in / Sign up

Export Citation Format

Share Document