scholarly journals Novel Cascade Solar Desalination Still: Mathematical, Numerical and Experimental Analysis

2019 ◽  
Vol 286 ◽  
pp. 08007
Author(s):  
M. Bouzaid ◽  
N. Mouhsin ◽  
M. Taha-Janan ◽  
M. Oubrek ◽  
O. Ansari

Morocco is considered as a water-stressed country and is among the countries that face fresh water scarcity. However Morocco has an important solar energy and a significant amount of seawater and ocean. Therefore converting saline water to fresh water using solar energy is the perfect and the cleanest solution. Solar still is the simplest, cleanest and cheapest technology of solar desalination. In this paper a novel solar still with stepped-slope absorber plate and baffles was proposed and developed in order to enhance the thermal performance of the conventional solar stills. In order to validate the performance of the developed technology a comparative study were elaborated. A mathematical model was developed. The energy balance equations for the various elements of the solar still are formulated and numerically solved using the dynamic simulation program Matlab/SimulinkTM and the Euler explicit method programmed by C++. Also, the experimental process of the new construction was evaluated and validates the new pattern performance. The thermal performance was investigated and shows considerable improvement through the new construction.

Author(s):  
Vikrant P Katekar ◽  
Sandip S Deshmukh

Solar still is a cost-effective and environment-friendly device to convert saline water into potable by employing solar energy in developing countries; however, it has an inferior thermal performance. This paper presents an attempt to improve energy efficiency and productivity of solar still by improving the design of the absorber plate. Modified solar still has been tested with a stepped-corrugated absorber plate. During the experimentation, it is found that the thermal performance of modified solar still is superior to conventional solar still. The average basin saline water temperature and the temperature difference between saline water and condenser glass cover are higher for stepped-corrugated solar still by 19.67 and 105.75%, respectively, as compared with conventional solar still. The average energy efficiency, exergy efficiency and productivity are found to be 259.61, 418.61 and 147.93% higher for stepped-corrugated solar still. Economic analysis indicates that the cost of distil water production is approximately Rs. 1.73 (0.023 $) per litre, and the payback period is 12 months, with carbon credits earned are approximately Rs. 11,998 (157.76 $).


2018 ◽  
Vol 5 (2) ◽  
pp. 124-133
Author(s):  
S.M. Atnaw ◽  
R.M. Ramli ◽  
S.A. Rusdah ◽  
T. Marimuthu ◽  
P. Mardarveran ◽  
...  

Direct sunlight has been utilized long back for desalination of water. Solar still is a device that converts saline water to potable water. This project mainly discussed about point-focus parabolic solar still (PPSS). Since lack of water supply has become a serious problem today, this prototype is design to produce fresh water from saline water to enable continuous supply of water. However, the current solar desalination generation capacity is generally low and has high installation cost. Hence, there is a need for the enhancement of the productivity which can be achieved through point focus parabolic solar still. Existing PPSS produces of 3.56 L/m2 fresh water of per day. In this project, we have some modifications which will increase the productivity of PPSS.


Author(s):  
C.K. Sivakumar ◽  
Y. Robinson ◽  
K. Saravanakumar

This paper deals with the effect of thickness of glass material which covered on double slope solar desalination still, performance of the solar still affected by thickness of the glass, which result in to major heat losses in the system. Two inward double slope desalination still with different glass thickness were designed, constructed and experimentally tested their performance. The glasses are inclined 200 from the center of the still. The solar energy collecting area of still is 1m2.The result shows that the variation in glass thickness will affect the efficiency of the still, desalination still with 4mm thickness gives 48% higher fresh water productivity compare to 6mm glass thickness.


2015 ◽  
Vol 138 (1) ◽  
Author(s):  
Satyender Singh ◽  
Prashant Dhiman

Thermal performance of a single-pass single-glass cover solar air heater consisting of semicircular absorber plate finned with rectangular longitudinal fins is investigated. The analysis is carried out for different hydraulic diameters, which were obtained by varying the diameter of the duct from 0.3–0.5 m. One to five numbers of fins are considered. Reynolds number ranges from 1600–4300. Analytical solutions for energy balance equations of different elements and duct flow of the solar air heater are presented; results are compared with finite-volume methodology based numerical solutions obtained from ansys fluent commercial software, and a fairly good agreement is achieved. Moreover, analysis is extended to check the effect of double-glass cover and the recycle of the exiting air. Results revealed that the use of double-glass cover and recycle operation improves the thermal performance of solar air heater.


2014 ◽  
Vol 592-594 ◽  
pp. 2409-2415 ◽  
Author(s):  
S. Naga Sarada ◽  
Banoth Hima Bindu ◽  
Sri Rama R. Devi ◽  
Ravi Gugulothu

In recent years with the exacerbation of energy shortage, water crisis increases around the world. With the continuous increase in the level of greenhouse gas emissions, the use of various sources of renewable energy is increasingly becoming important for sustainable development. Due to the rising oil price and environmental regulations, the demand of utilizing alternative power sources increased dramatically. Alternative energy and its applications have been heavily studied for the last decade. Energy and water are essential for mankind that influences the socioeconomic development of any nation. Pure water resources become more and more scarce every day as rivers, lakes wells and even seawater pollution rapidly increases. Solar energy is one promising solution to secure power and potable water to future generation. The process of distillation can be used to obtain fresh water from salty, brackish or contaminated water. Water is available in different forms such as sea water, underground water, surface water and atmospheric water. Clean water is essential for good health. The search for sustainable energy resources has emerged as one of the most significant and universal concerns in the 21st century. Solar energy conversion offers a cost effective alternative to our traditional usages. Solar energy is a promising candidate in many applications. Among the alternative energy sources used for electricity production, wind and solar energy systems have become more attractive in recent years. For areas where electricity was not available, stand alone wind and solar systems have been increasingly used. The shortage of drinking water in many countries throughout the world is a serious problem. Humankind has depended for ages on river, sea water and underground water reservoirs for its fresh water needs. But these sources do not always prove to be useful due to the presence of excessive salinity in the water. To resolve this crisis, different methods of solar desalination have been used in many countries. Distillation is a well known thermal process for water purification, most importantly, water desalination. Most of the conventional water distillation processes are highly energy consuming and require fossil fuels as well as electric power for their operation. Single basin solar still is a popular solar device used for converting available brackish or waste water into potable water. Because of its lower productivity, it is not popularly used. Numbers of works are under taken to improve the productivity and efficiency of the solar still. There are large numbers of PCMs that melt and solidify at wide range of temperatures, making them attractive in a number of applications. PCMs have been widely used in latent heat thermal storage systems for heat pumps, solar engineering and spacecraft thermal control applications. The use of PCMs for heating and cooling applications for buildings has been investigated within the past decade. The experimental results computed in the field of water distillation process using solar energy in the presence of energy storage materials sodium sulphate and sodium acetate are discussed in this paper. Keywords: solar energy, saline water, distillation, phase change material.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Naresh Yarramsetty ◽  
Naveen Sharma ◽  
Modumudi Lakshmi Narayana

Purpose This study aims to investigate the effect of porous material (clay pots) and it is facing on the productivity performance of a pyramid type solar still. The clay pots are placed in the basin facing up and facing down. The numbers of clay pots considered were 9 and 25, and its performance was compared with normal (0 clay pots) solar still. Design/methodology/approach The pyramid solar water distillation system has been designed, fabricated and tested under the actual environmental conditions of Kanchikacherla (16.6834 0N, 80.3904 0E), Andhra Pradesh, India. The solar still is used to produce the fresh water and hot water simultaneously from the brackish (i.e. containing dissolved salts) feed water for domestic applications. From open literature, it was established that the rate of evaporation is higher when the flowing water is held for a longer duration on the black color absorber plate, thereby leading to an increase in productivity of freshwater. Therefore, the pyramid solar still has been tested for smooth absorber plate and the absorber plate with porous heat storage material. Findings The porous material increases the production rate of freshwater compared to a base plate. However, the pyramid still with clay pots has higher productivity at a lower temperature because of the porosity effect. Originality/value The total dissolved solids, electrical conductivity and pH of the distilled water and the saline water have also been measured and compared.


2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Z. S. Abdel-Rehim ◽  
A. Lashine

A study of solar desalination still combined with air-conditioning system is presented in this work. Combining the solar still with the air-conditioning system can increase the condensate output from the solar still while meeting the cooling load needs. The operation of the combined solar distillation and air-conditioning system, that utilized the heat rejected by the condenser and the heat sink of the evaporator, has been tested to obtain the distillate output from the solar still during the air-conditioning of a space application. Experimental work of the present system is carried out in June 2009 (summer month), in Cairo, Egypt. The present problem is tested to use the integrated system operation for already utilizing air-conditioning energy consumption; that is, meeting the hourly air-conditioning load and the daily fresh water production. The system is tested for day and nighttimes of operation of the combined system for the summer month: June 2009, Cairo, Egypt. Economic study evaluation is presented. The results show that the maximum fresh water productivity through June is 29 Liters in daytime of June 5 2009 and 37 liters in nighttime (nocturnal time) of June 3 2009. The present system more efficient in day time (8:00 AM–8:00 PM) and night time (8:00 PM–8:00 AM). Therefore, the maximum efficiency is recorded 40% for the present system in daytime, 36% in nighttime, and 25% for conventional solar still. COP increases with inside temperature (Ti), however it decreases with outside temperature (Tamb). The average cost of one liter of distillate water from the present combined system = 0.021441 (LE).


Author(s):  
Md. Raquibul Hasan

The availability of drinking water is reducing day by day, whereas the freshwater necessity is tremendously increasing. There is a need for some sustainable water distillation (purification) to overcome this problem. Solar desalination is a technique used to convert brackish or saline water into potable water, and solar still is a useful device to distil brackish water for drinking purposes. Numerous designs of the solar still system have been developed worldwide. Many researchers outlined mathematical terms, performed experiments and validated the outcome from the various types of solar stills by varying the design and operating parameters. In this article, a review of the active and passive solar stills' performance has been carried out.


2018 ◽  
Vol 877 ◽  
pp. 414-429 ◽  
Author(s):  
R. Dhivagar ◽  
S. Sundararaj

Population density and automation is the main reason for the demand of drinking water. Water purification without affecting an ecosystem is the important need for daily life. Desalination is the best and effective way to satisfy the demand of fresh water. It is the most effective application of the solar energy. There are many conventional and non-conventional techniques available to make drinking water from the saline water. Among these solar desalination proves to be both economical and eco-friendly system particularly for rural areas. Solar stills are simple device which is used to provide pure water from the saline water by the principle of evaporation and condensation. This article reviews on the several research done on the solar stills to enhance productivity. Different designs of solar still and energy storage materials have been used to increase the yield and also this study proved the fact that efficiency of the solar still is majorly influenced by design and operating parameters.


Sign in / Sign up

Export Citation Format

Share Document