scholarly journals Effect of glass thickness on performance of double slope inward solar desalination still for fresh water production

Author(s):  
C.K. Sivakumar ◽  
Y. Robinson ◽  
K. Saravanakumar

This paper deals with the effect of thickness of glass material which covered on double slope solar desalination still, performance of the solar still affected by thickness of the glass, which result in to major heat losses in the system. Two inward double slope desalination still with different glass thickness were designed, constructed and experimentally tested their performance. The glasses are inclined 200 from the center of the still. The solar energy collecting area of still is 1m2.The result shows that the variation in glass thickness will affect the efficiency of the still, desalination still with 4mm thickness gives 48% higher fresh water productivity compare to 6mm glass thickness.

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Z. S. Abdel-Rehim ◽  
A. Lashine

A study of solar desalination still combined with air-conditioning system is presented in this work. Combining the solar still with the air-conditioning system can increase the condensate output from the solar still while meeting the cooling load needs. The operation of the combined solar distillation and air-conditioning system, that utilized the heat rejected by the condenser and the heat sink of the evaporator, has been tested to obtain the distillate output from the solar still during the air-conditioning of a space application. Experimental work of the present system is carried out in June 2009 (summer month), in Cairo, Egypt. The present problem is tested to use the integrated system operation for already utilizing air-conditioning energy consumption; that is, meeting the hourly air-conditioning load and the daily fresh water production. The system is tested for day and nighttimes of operation of the combined system for the summer month: June 2009, Cairo, Egypt. Economic study evaluation is presented. The results show that the maximum fresh water productivity through June is 29 Liters in daytime of June 5 2009 and 37 liters in nighttime (nocturnal time) of June 3 2009. The present system more efficient in day time (8:00 AM–8:00 PM) and night time (8:00 PM–8:00 AM). Therefore, the maximum efficiency is recorded 40% for the present system in daytime, 36% in nighttime, and 25% for conventional solar still. COP increases with inside temperature (Ti), however it decreases with outside temperature (Tamb). The average cost of one liter of distillate water from the present combined system = 0.021441 (LE).


2019 ◽  
Vol 286 ◽  
pp. 08007
Author(s):  
M. Bouzaid ◽  
N. Mouhsin ◽  
M. Taha-Janan ◽  
M. Oubrek ◽  
O. Ansari

Morocco is considered as a water-stressed country and is among the countries that face fresh water scarcity. However Morocco has an important solar energy and a significant amount of seawater and ocean. Therefore converting saline water to fresh water using solar energy is the perfect and the cleanest solution. Solar still is the simplest, cleanest and cheapest technology of solar desalination. In this paper a novel solar still with stepped-slope absorber plate and baffles was proposed and developed in order to enhance the thermal performance of the conventional solar stills. In order to validate the performance of the developed technology a comparative study were elaborated. A mathematical model was developed. The energy balance equations for the various elements of the solar still are formulated and numerically solved using the dynamic simulation program Matlab/SimulinkTM and the Euler explicit method programmed by C++. Also, the experimental process of the new construction was evaluated and validates the new pattern performance. The thermal performance was investigated and shows considerable improvement through the new construction.


2014 ◽  
Vol 592-594 ◽  
pp. 2409-2415 ◽  
Author(s):  
S. Naga Sarada ◽  
Banoth Hima Bindu ◽  
Sri Rama R. Devi ◽  
Ravi Gugulothu

In recent years with the exacerbation of energy shortage, water crisis increases around the world. With the continuous increase in the level of greenhouse gas emissions, the use of various sources of renewable energy is increasingly becoming important for sustainable development. Due to the rising oil price and environmental regulations, the demand of utilizing alternative power sources increased dramatically. Alternative energy and its applications have been heavily studied for the last decade. Energy and water are essential for mankind that influences the socioeconomic development of any nation. Pure water resources become more and more scarce every day as rivers, lakes wells and even seawater pollution rapidly increases. Solar energy is one promising solution to secure power and potable water to future generation. The process of distillation can be used to obtain fresh water from salty, brackish or contaminated water. Water is available in different forms such as sea water, underground water, surface water and atmospheric water. Clean water is essential for good health. The search for sustainable energy resources has emerged as one of the most significant and universal concerns in the 21st century. Solar energy conversion offers a cost effective alternative to our traditional usages. Solar energy is a promising candidate in many applications. Among the alternative energy sources used for electricity production, wind and solar energy systems have become more attractive in recent years. For areas where electricity was not available, stand alone wind and solar systems have been increasingly used. The shortage of drinking water in many countries throughout the world is a serious problem. Humankind has depended for ages on river, sea water and underground water reservoirs for its fresh water needs. But these sources do not always prove to be useful due to the presence of excessive salinity in the water. To resolve this crisis, different methods of solar desalination have been used in many countries. Distillation is a well known thermal process for water purification, most importantly, water desalination. Most of the conventional water distillation processes are highly energy consuming and require fossil fuels as well as electric power for their operation. Single basin solar still is a popular solar device used for converting available brackish or waste water into potable water. Because of its lower productivity, it is not popularly used. Numbers of works are under taken to improve the productivity and efficiency of the solar still. There are large numbers of PCMs that melt and solidify at wide range of temperatures, making them attractive in a number of applications. PCMs have been widely used in latent heat thermal storage systems for heat pumps, solar engineering and spacecraft thermal control applications. The use of PCMs for heating and cooling applications for buildings has been investigated within the past decade. The experimental results computed in the field of water distillation process using solar energy in the presence of energy storage materials sodium sulphate and sodium acetate are discussed in this paper. Keywords: solar energy, saline water, distillation, phase change material.


Author(s):  
Y. Robinson ◽  
C.K. Sivakumar

This study aimed at investigating the effect of wind for double slope solar desalination still. Two double slope solar stills were designed, constructed and experimentally tested their performance depending up on the wind. One experiment carried out with a wind speed of 4m/s and other 3m/s. The results show that the variation in wind affects the fresh water production. Double slope solar desalination still with wind speed 4m/s gives 17.8% higher productivity compare to 3m/s. Keywords: wind, freshwater production, desalination.


2020 ◽  
Vol 28 ◽  
pp. 101204 ◽  
Author(s):  
A.E. Kabeel ◽  
Ravishankar Sathyamurthy ◽  
A. Muthu Manokar ◽  
Swellam W. Sharshir ◽  
F.A. Essa ◽  
...  

Author(s):  
Md. Islam ◽  
F. Banat ◽  
A. Baba ◽  
S. Abuyahya

Abstract Fresh water demands are increasing day by day because of growing population, industrialization, and increased living standards. Desalination technology has become a significant solution of fresh drinking water for many parts of the world. Lack of fresh water resources in dry environments has encouraged the establishment of desalination processes and developed technology to compensate for water scarcity. The MSF (multistage flash) desalination technique has received wide spread acceptance due to low temperature heat source (waste heat/inexpensive energy), simple construction high process reliability and simple maintenance. MSF typically has the highest water production cost among available desalination technologies, which can be reduced with using solar energy/co-generation. Since Abu Dhabi is in the solar belt region and is blessed with huge solar energy, MSF desalination can be powered by solar power in addition to industrial waste/fossil fuel energy, which will significantly reduce the cost as well as carbon, footprint. In this research, multistage flash desalination is modelled using ASPEN HYSYS package V8. We have designed each components of the system, mostly heating source, vacuum/flash chambers, heat exchangers and developed the whole system. Some parametric study, i.e. feed rate, top brine temperature, heat input, pressure, productivity etc. of multistage flash desalination system has been conducted in this research. Two case studies have been conducted and found a relation between feed flow rate and water production rate as well as chamber pressure with vapor formation. This design will help to build the pilot plant, do experimental test and validate the model.


2013 ◽  
Vol 2 (3) ◽  
pp. 115-120 ◽  
Author(s):  
S. Ravishankara ◽  
P.K. Nagarajan ◽  
D. Vijayakumar ◽  
M.K. Jawahar

The augmentation of fresh water and increase in the solar still efficiency of a triangular pyramid is added with phase change material (PCM) on the basin. Experimental studies were conducted and the effects of production of fresh water with and without PCM were investigated. Using paraffin as the PCM material, performance of the solar still were conducted on a hot, humid climate of Chennai (13°5′ 2" North, 80°16′ 12"East), India. The use of paraffin wax increases the latent heat storage so that the energy is stored in the PCM and in the absence of solar radiation it rejects its stored heat into the basin for further evaporation of water from the basin. Temperatures of water, Tw, Temperature of phase change material, TPCM, Temperature of cover, Tc were measured using thermocouple. Results show that there is an increase of maximum 20%, in productivity of fresh water with PCM. Keywords: fresh water production; PCM; thermal energy storage; phase change material


2021 ◽  
Vol 13 (1) ◽  
pp. 98-104
Author(s):  
Abhinav Yadav ◽  
Md Saifullah Khalid ◽  
Prashant Saini ◽  
Ankit Kumar

The necessity of pure water is rising each day, causes are population, industrial and agricultural expansion, worldwide. Due to the increasing population of world the fresh water will become more serious problem in the coming days. Hence, people around the world have to work on different and efficient methodology to generate potable water. Solar still is one among these methods acting device. In this paper, a review of using PCM and PCM with other enhancement techniques has been discussed. Use of stearic acid as a PCM below the liner of basin, each day pure water of 9.005kg/m2 per day and 4.998 kg/m2 per day has been found in the company of PCM and not including of PCM respectively. It is observed that solar desalination system in the company of paraffin-CuO is best among the others solar still with paraffin PCM, paraffin-TiO2, paraffin-GO. CuO, TiO2 and GO are the nanoparticles.


Sign in / Sign up

Export Citation Format

Share Document