A review on various designs of solar still

Author(s):  
Md. Raquibul Hasan

The availability of drinking water is reducing day by day, whereas the freshwater necessity is tremendously increasing. There is a need for some sustainable water distillation (purification) to overcome this problem. Solar desalination is a technique used to convert brackish or saline water into potable water, and solar still is a useful device to distil brackish water for drinking purposes. Numerous designs of the solar still system have been developed worldwide. Many researchers outlined mathematical terms, performed experiments and validated the outcome from the various types of solar stills by varying the design and operating parameters. In this article, a review of the active and passive solar stills' performance has been carried out.

2018 ◽  
Vol 877 ◽  
pp. 414-429 ◽  
Author(s):  
R. Dhivagar ◽  
S. Sundararaj

Population density and automation is the main reason for the demand of drinking water. Water purification without affecting an ecosystem is the important need for daily life. Desalination is the best and effective way to satisfy the demand of fresh water. It is the most effective application of the solar energy. There are many conventional and non-conventional techniques available to make drinking water from the saline water. Among these solar desalination proves to be both economical and eco-friendly system particularly for rural areas. Solar stills are simple device which is used to provide pure water from the saline water by the principle of evaporation and condensation. This article reviews on the several research done on the solar stills to enhance productivity. Different designs of solar still and energy storage materials have been used to increase the yield and also this study proved the fact that efficiency of the solar still is majorly influenced by design and operating parameters.


2018 ◽  
Vol 5 (2) ◽  
pp. 124-133
Author(s):  
S.M. Atnaw ◽  
R.M. Ramli ◽  
S.A. Rusdah ◽  
T. Marimuthu ◽  
P. Mardarveran ◽  
...  

Direct sunlight has been utilized long back for desalination of water. Solar still is a device that converts saline water to potable water. This project mainly discussed about point-focus parabolic solar still (PPSS). Since lack of water supply has become a serious problem today, this prototype is design to produce fresh water from saline water to enable continuous supply of water. However, the current solar desalination generation capacity is generally low and has high installation cost. Hence, there is a need for the enhancement of the productivity which can be achieved through point focus parabolic solar still. Existing PPSS produces of 3.56 L/m2 fresh water of per day. In this project, we have some modifications which will increase the productivity of PPSS.


2014 ◽  
Vol 592-594 ◽  
pp. 2409-2415 ◽  
Author(s):  
S. Naga Sarada ◽  
Banoth Hima Bindu ◽  
Sri Rama R. Devi ◽  
Ravi Gugulothu

In recent years with the exacerbation of energy shortage, water crisis increases around the world. With the continuous increase in the level of greenhouse gas emissions, the use of various sources of renewable energy is increasingly becoming important for sustainable development. Due to the rising oil price and environmental regulations, the demand of utilizing alternative power sources increased dramatically. Alternative energy and its applications have been heavily studied for the last decade. Energy and water are essential for mankind that influences the socioeconomic development of any nation. Pure water resources become more and more scarce every day as rivers, lakes wells and even seawater pollution rapidly increases. Solar energy is one promising solution to secure power and potable water to future generation. The process of distillation can be used to obtain fresh water from salty, brackish or contaminated water. Water is available in different forms such as sea water, underground water, surface water and atmospheric water. Clean water is essential for good health. The search for sustainable energy resources has emerged as one of the most significant and universal concerns in the 21st century. Solar energy conversion offers a cost effective alternative to our traditional usages. Solar energy is a promising candidate in many applications. Among the alternative energy sources used for electricity production, wind and solar energy systems have become more attractive in recent years. For areas where electricity was not available, stand alone wind and solar systems have been increasingly used. The shortage of drinking water in many countries throughout the world is a serious problem. Humankind has depended for ages on river, sea water and underground water reservoirs for its fresh water needs. But these sources do not always prove to be useful due to the presence of excessive salinity in the water. To resolve this crisis, different methods of solar desalination have been used in many countries. Distillation is a well known thermal process for water purification, most importantly, water desalination. Most of the conventional water distillation processes are highly energy consuming and require fossil fuels as well as electric power for their operation. Single basin solar still is a popular solar device used for converting available brackish or waste water into potable water. Because of its lower productivity, it is not popularly used. Numbers of works are under taken to improve the productivity and efficiency of the solar still. There are large numbers of PCMs that melt and solidify at wide range of temperatures, making them attractive in a number of applications. PCMs have been widely used in latent heat thermal storage systems for heat pumps, solar engineering and spacecraft thermal control applications. The use of PCMs for heating and cooling applications for buildings has been investigated within the past decade. The experimental results computed in the field of water distillation process using solar energy in the presence of energy storage materials sodium sulphate and sodium acetate are discussed in this paper. Keywords: solar energy, saline water, distillation, phase change material.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Naresh Yarramsetty ◽  
Naveen Sharma ◽  
Modumudi Lakshmi Narayana

Purpose This study aims to investigate the effect of porous material (clay pots) and it is facing on the productivity performance of a pyramid type solar still. The clay pots are placed in the basin facing up and facing down. The numbers of clay pots considered were 9 and 25, and its performance was compared with normal (0 clay pots) solar still. Design/methodology/approach The pyramid solar water distillation system has been designed, fabricated and tested under the actual environmental conditions of Kanchikacherla (16.6834 0N, 80.3904 0E), Andhra Pradesh, India. The solar still is used to produce the fresh water and hot water simultaneously from the brackish (i.e. containing dissolved salts) feed water for domestic applications. From open literature, it was established that the rate of evaporation is higher when the flowing water is held for a longer duration on the black color absorber plate, thereby leading to an increase in productivity of freshwater. Therefore, the pyramid solar still has been tested for smooth absorber plate and the absorber plate with porous heat storage material. Findings The porous material increases the production rate of freshwater compared to a base plate. However, the pyramid still with clay pots has higher productivity at a lower temperature because of the porosity effect. Originality/value The total dissolved solids, electrical conductivity and pH of the distilled water and the saline water have also been measured and compared.


2019 ◽  
Author(s):  
Ghanim Hassan ◽  
Robert G. J. Edyvean

Abstract. Froth flotation is a well-known solid-liquid separation technique. Hydrophobicity is the main driving force for such processes. Hydrophobic solids attach to air bubbles and rise up while hydrophilic or less hydrophobic species settle down. Froth can be produced with chemical frothers such as alcohols and polyglycols. However, the use of chemicals limits the use of this separation method in applications such as drinking water, food, and pharmaceutical industries. Therefore, developing a technique that produces froth without adding any chemicals would be useful to such industries. This work demonstrates that with suitable operating parameters a 27 cm froth height can be obtained in a 20 cm diameter column by using an air flow rate of 130 l/min.


Author(s):  
Sudhanshu S. Kamat ◽  
Dilip D. Sarode

Solar desalination technologies are becoming popular among the scientific community for the production of fresh water from the brackish water. Membrane technologies are expensive to be implemented on small scale. Solar stills have simple working principle and there is low cost associated with it. Varied configurations and modifications have been implemented to improve the performance of solar stills. Thermodynamic analysis has also been done for the same. However, it is important to also optimize various combinations of the operating parameters, including the cost-benefit analysis associated with it. This paper focuses on the review of the effects of various geometric and operating parameters, and also optimizing the thermodynamics to improve the performance of solar still.


Author(s):  
Subramaniyan C ◽  
◽  
Prakash K B ◽  
Amarkarthik A ◽  
Kalidasan B ◽  
...  

Demand and conservation for potable water has become a foremost concern world-wide. Many technologies were adapted for converting the saline water to potable water to meet the required demand on water conservation. In the current research work triangular solar still with rectangular-fins attached to the basin is proposed to enhance the output of potable water from the solar still setup. Solar still with and without rectangular-fins on the basin are fabricated for experimental comparison and evaluation in addition to numerical investigations. Thermal Performance, instantaneous efficiency and potable water output of the proposed solar still & base solar still are investigated during March month for the location of Sathyamangalam. Investigation shows enhancement of water production in the proposed solar still by 41% higher compared to the base still. The maximum distillate output from modified still and base still for a typical day is 3.1 liter and 2.2 liter respectively.


2020 ◽  
pp. 221-231
Author(s):  
Anil Kumar ◽  
Rohit Kumar

Water and the use of conventional energy sources are two significant problems of the world. Water is essential for sustenance. Human beings need of potable water at less consumption of non- renewable energy resources. There are many techniques to convert saline water into potable water. In this paper, three-phase, three dimensional a single slope and double slope single basin still both were prepared and simulated by using ANSYS FLUENT v19.2. Simulation results of solar stills were made by using evaporation as well as condensation process at the climate conditions of Delhi (27.0238° N, 74.2179° E). Within the scope of this study, simulation results of both systems were calculated and compared with each other. It is examined that temperature inside the single slope solar still is maximum from 13:00 to 14:00 hrs while double slope still has low temperature compared to single still. The maximum and minimum temperature of water-vapor mixture inside the single slope still were calculated 435.39K and 22.283K and maximum and minimum temperature on glass were 379 K and 16.22 K whereas in double slope, maximum and minimum temperature of water-vapor mixture inside the still were 92.12K and 25.60K and glass temperature were 76.154K and 19.22K Hence, due to temperature difference between glass surface and outer environment, more condensation will be in single slope. Inner water temperature is responsible for more evaporation and higher temperature more than 50? can be found in single slope still as compared to double slope. Hence, single slope still could be better there.


Sign in / Sign up

Export Citation Format

Share Document