scholarly journals Improvement of solar still productivity by using PCM and other enhancement technique- A review

2021 ◽  
Vol 13 (1) ◽  
pp. 98-104
Author(s):  
Abhinav Yadav ◽  
Md Saifullah Khalid ◽  
Prashant Saini ◽  
Ankit Kumar

The necessity of pure water is rising each day, causes are population, industrial and agricultural expansion, worldwide. Due to the increasing population of world the fresh water will become more serious problem in the coming days. Hence, people around the world have to work on different and efficient methodology to generate potable water. Solar still is one among these methods acting device. In this paper, a review of using PCM and PCM with other enhancement techniques has been discussed. Use of stearic acid as a PCM below the liner of basin, each day pure water of 9.005kg/m2 per day and 4.998 kg/m2 per day has been found in the company of PCM and not including of PCM respectively. It is observed that solar desalination system in the company of paraffin-CuO is best among the others solar still with paraffin PCM, paraffin-TiO2, paraffin-GO. CuO, TiO2 and GO are the nanoparticles.

2014 ◽  
Vol 592-594 ◽  
pp. 2409-2415 ◽  
Author(s):  
S. Naga Sarada ◽  
Banoth Hima Bindu ◽  
Sri Rama R. Devi ◽  
Ravi Gugulothu

In recent years with the exacerbation of energy shortage, water crisis increases around the world. With the continuous increase in the level of greenhouse gas emissions, the use of various sources of renewable energy is increasingly becoming important for sustainable development. Due to the rising oil price and environmental regulations, the demand of utilizing alternative power sources increased dramatically. Alternative energy and its applications have been heavily studied for the last decade. Energy and water are essential for mankind that influences the socioeconomic development of any nation. Pure water resources become more and more scarce every day as rivers, lakes wells and even seawater pollution rapidly increases. Solar energy is one promising solution to secure power and potable water to future generation. The process of distillation can be used to obtain fresh water from salty, brackish or contaminated water. Water is available in different forms such as sea water, underground water, surface water and atmospheric water. Clean water is essential for good health. The search for sustainable energy resources has emerged as one of the most significant and universal concerns in the 21st century. Solar energy conversion offers a cost effective alternative to our traditional usages. Solar energy is a promising candidate in many applications. Among the alternative energy sources used for electricity production, wind and solar energy systems have become more attractive in recent years. For areas where electricity was not available, stand alone wind and solar systems have been increasingly used. The shortage of drinking water in many countries throughout the world is a serious problem. Humankind has depended for ages on river, sea water and underground water reservoirs for its fresh water needs. But these sources do not always prove to be useful due to the presence of excessive salinity in the water. To resolve this crisis, different methods of solar desalination have been used in many countries. Distillation is a well known thermal process for water purification, most importantly, water desalination. Most of the conventional water distillation processes are highly energy consuming and require fossil fuels as well as electric power for their operation. Single basin solar still is a popular solar device used for converting available brackish or waste water into potable water. Because of its lower productivity, it is not popularly used. Numbers of works are under taken to improve the productivity and efficiency of the solar still. There are large numbers of PCMs that melt and solidify at wide range of temperatures, making them attractive in a number of applications. PCMs have been widely used in latent heat thermal storage systems for heat pumps, solar engineering and spacecraft thermal control applications. The use of PCMs for heating and cooling applications for buildings has been investigated within the past decade. The experimental results computed in the field of water distillation process using solar energy in the presence of energy storage materials sodium sulphate and sodium acetate are discussed in this paper. Keywords: solar energy, saline water, distillation, phase change material.


2018 ◽  
Vol 5 (2) ◽  
pp. 124-133
Author(s):  
S.M. Atnaw ◽  
R.M. Ramli ◽  
S.A. Rusdah ◽  
T. Marimuthu ◽  
P. Mardarveran ◽  
...  

Direct sunlight has been utilized long back for desalination of water. Solar still is a device that converts saline water to potable water. This project mainly discussed about point-focus parabolic solar still (PPSS). Since lack of water supply has become a serious problem today, this prototype is design to produce fresh water from saline water to enable continuous supply of water. However, the current solar desalination generation capacity is generally low and has high installation cost. Hence, there is a need for the enhancement of the productivity which can be achieved through point focus parabolic solar still. Existing PPSS produces of 3.56 L/m2 fresh water of per day. In this project, we have some modifications which will increase the productivity of PPSS.


Author(s):  
Abhishek S. Kagdelwar

Pure water is renewable resource on the earth, it getting impure now a days. Solar desalination is one of the best way to produce fresh water from any type of impure water in a sustainable way. A solar still is a simply design device used to purify the water by using solar energy by the process of evaporation and condensation. Generally, the productivity of the conventional solar still is about 1–5 L/m2/day. But this quantity is not sufficient for an individual to fulfill daily needs of water in life. Hence either more than 1 L/m2 is required per person or better for modifications to improve the solar still design for the demand of the fresh water (likely more than 5 L/m2/day). In this work, an attempt has been made to categorize the different solar still designs with productivity more than 5L/m2/day. Here, we identify as such efficient high productivity of solar stills and discuss their modifications and heat transfer mechanism to reach at useful conclusions. This review will be a reference guide for future researchers who wish to concentrate only on efficient high productivity of solar stills to improve the productivity or efficiency.


2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
Z. S. Abdel-Rehim ◽  
A. Lashine

A study of solar desalination still combined with air-conditioning system is presented in this work. Combining the solar still with the air-conditioning system can increase the condensate output from the solar still while meeting the cooling load needs. The operation of the combined solar distillation and air-conditioning system, that utilized the heat rejected by the condenser and the heat sink of the evaporator, has been tested to obtain the distillate output from the solar still during the air-conditioning of a space application. Experimental work of the present system is carried out in June 2009 (summer month), in Cairo, Egypt. The present problem is tested to use the integrated system operation for already utilizing air-conditioning energy consumption; that is, meeting the hourly air-conditioning load and the daily fresh water production. The system is tested for day and nighttimes of operation of the combined system for the summer month: June 2009, Cairo, Egypt. Economic study evaluation is presented. The results show that the maximum fresh water productivity through June is 29 Liters in daytime of June 5 2009 and 37 liters in nighttime (nocturnal time) of June 3 2009. The present system more efficient in day time (8:00 AM–8:00 PM) and night time (8:00 PM–8:00 AM). Therefore, the maximum efficiency is recorded 40% for the present system in daytime, 36% in nighttime, and 25% for conventional solar still. COP increases with inside temperature (Ti), however it decreases with outside temperature (Tamb). The average cost of one liter of distillate water from the present combined system = 0.021441 (LE).


Access to fresh water is a problem faced by both developed and under developed nations. Although seawater is plentiful, large amounts of energy is required to separate the potable water from the salts. Compared to other desalination processes utilising fossil fuels, solar distillation is inexpensive, environmentally friendly and employs clean and renewable energy. This paper seeks to explore the effect of the single slope solar still condenser plate material on the still production under Malaysian climate. 5 mm thick extra clear float glass condenser plate produced the highest amount of fresh water (63.5 ml) compared to 2 mm thick clear float glass and 5 mm thick bronze glass.


Author(s):  
Md. Raquibul Hasan

The availability of drinking water is reducing day by day, whereas the freshwater necessity is tremendously increasing. There is a need for some sustainable water distillation (purification) to overcome this problem. Solar desalination is a technique used to convert brackish or saline water into potable water, and solar still is a useful device to distil brackish water for drinking purposes. Numerous designs of the solar still system have been developed worldwide. Many researchers outlined mathematical terms, performed experiments and validated the outcome from the various types of solar stills by varying the design and operating parameters. In this article, a review of the active and passive solar stills' performance has been carried out.


2018 ◽  
Vol 877 ◽  
pp. 414-429 ◽  
Author(s):  
R. Dhivagar ◽  
S. Sundararaj

Population density and automation is the main reason for the demand of drinking water. Water purification without affecting an ecosystem is the important need for daily life. Desalination is the best and effective way to satisfy the demand of fresh water. It is the most effective application of the solar energy. There are many conventional and non-conventional techniques available to make drinking water from the saline water. Among these solar desalination proves to be both economical and eco-friendly system particularly for rural areas. Solar stills are simple device which is used to provide pure water from the saline water by the principle of evaporation and condensation. This article reviews on the several research done on the solar stills to enhance productivity. Different designs of solar still and energy storage materials have been used to increase the yield and also this study proved the fact that efficiency of the solar still is majorly influenced by design and operating parameters.


2015 ◽  
Vol 1116 ◽  
pp. 73-93 ◽  
Author(s):  
Mohamed Antar

Water desalination is receiving increasing attention due to water scarcity in many places in the world. Although two third of the earth is covered with water, most of this water is salty (97.5%) and therefore not suitable for human, animal or plant needs. Furthermore, most of the fresh water available throughout the work is not accessible such as icebergs and some deep ground water. Water uneven distribution throughout the world creates another problem of water scarcities in arid places. Africa and Middle East are having the smallest share of natural, pure water resources. Fortunately, these areas of arid climate and low fresh water are rich in the most significant renewable energy source, solar energy. In this chapter, the potential of the utilization of renewable energy sources is discussed. Several desalination techniques that can be powered by renewable energy are discussed. Those techniques include the non-conventional ones such as the solar stills, humidification dehumidification desalination and membrane distillation. What is common within all of these techniques is the relatively low temperatures needed to operate the plants (around 80 °C) that can be afforded easily using solar collectors for heating water (and sometimes air). Several layouts of humidification dehumidification systems and membrane distillation system are also discussed in details taking into consideration the improvement of performance due to energy recovery systems and the recent trends of such technologies. Although the solar energy is basically free source of energy, how good this energy is utilized in operating the desalination systems is considered in the gain output ratio (GOR) that allows for comparison of different systems comparison and shows the room for improvement.


2019 ◽  
Vol 286 ◽  
pp. 08007
Author(s):  
M. Bouzaid ◽  
N. Mouhsin ◽  
M. Taha-Janan ◽  
M. Oubrek ◽  
O. Ansari

Morocco is considered as a water-stressed country and is among the countries that face fresh water scarcity. However Morocco has an important solar energy and a significant amount of seawater and ocean. Therefore converting saline water to fresh water using solar energy is the perfect and the cleanest solution. Solar still is the simplest, cleanest and cheapest technology of solar desalination. In this paper a novel solar still with stepped-slope absorber plate and baffles was proposed and developed in order to enhance the thermal performance of the conventional solar stills. In order to validate the performance of the developed technology a comparative study were elaborated. A mathematical model was developed. The energy balance equations for the various elements of the solar still are formulated and numerically solved using the dynamic simulation program Matlab/SimulinkTM and the Euler explicit method programmed by C++. Also, the experimental process of the new construction was evaluated and validates the new pattern performance. The thermal performance was investigated and shows considerable improvement through the new construction.


Author(s):  
Harender Sinhmar ◽  
Jitendra Bhati ◽  
Ritanshu Bhati

Abstract The shortage for the pure water exists in many developing countries like India even though three fourth of the earth is sheltered by water. The main reason behind this is the unplanned growth of industry and uncontrolled growth of population. In this context, solar still may serve as an efficient solution for addressing pure water shortage in hot climatic areas facing scarcity of water. Solar still is a very simple device that can be used for converting the available non-potable water into potable water. Various water purifiers based on solar energy have been proposed in literature but most of them are having low water output. This paper presents a novel method of a solar water purifier operating under vacuum to enhance its productivity. An experimental investigation of a scaled model has been carried out and it was observed that productivity of solar still increases with decrease in pressure inside the still.


Sign in / Sign up

Export Citation Format

Share Document