scholarly journals Research on the Impediment to Vibration Wave Propagation of Pipe from a vibration isolation mass

2019 ◽  
Vol 288 ◽  
pp. 01002
Author(s):  
Gong Yufeng ◽  
Peng Weicai ◽  
Zhang Junjie ◽  
Liu Zhizhong
Keyword(s):  
Wave Propagation ◽  
Numerical Analysis ◽  
Frequency Domain ◽  
High Frequency ◽  
Vibration Isolation ◽  
Rotational Inertia ◽  
Analysis Method ◽  
Damping Effect ◽  
Vibration Wave ◽  
Pipe Vibration

In order to control the pipe vibration, the performance of flexible connection with vibration isolation mass in impeding vibration wave propagation is studied. Based on the principle of impedance mismatching and numerical analysis method, the influences of vibration isolation mass and rotational inertia on the vibration wave propagation in pipe were discussed. The results show that the isolation mass is good at reducing the vibration of wave transmission in intermediate and high frequency domain. Meanwhile, The larger rotational inertia of the isolation mass, the better the damping effect. A useful reference was provided for the application of flexible connection to the vibration isolation and noise reduction of ship pipe.

Research on dynamic stiffness of the damping element in bellows-type fluid viscous damper by a simplified model

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Xiaolei Jiao ◽  
Jinxiu Zhang ◽  
Hongchao Zhao ◽  
Yong Yan
Keyword(s):  
Frequency Domain ◽  
Analytical Model ◽  
High Frequency ◽  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Simplified Model ◽  
Viscous Damper ◽  
Content Type ◽  
Fluid Viscous Damper ◽  
Frequency Domains

Purpose Bellows-type fluid viscous damper can be used to isolate micro vibration in high-precision satellites. The conventional model cannot describe hydraulic stiffness in the medium- and high-frequency domain of this damper. A simplified analytical model needs to be established to analyze hydraulic stiffness of the damping element in this damper. Design/methodology/approach In this paper, a bellows-type fluid viscous damper is researched, and a simplified model of the damping element in this damper is proposed. Based on this model, the hydraulic stiffness and damping of this damper in the medium- and high-frequency domains are studied, and a comparison is made between the analytical model and a finite element model to verify the analytical model. Findings The results show that when silicone oil has low viscosity, a model that considers the influence of the initial segment of the damping orifice is more reasonable. In the low-frequency domain, hydraulic stiffness increases quickly with frequency and remains stable when the frequency increases to a certain value; the stable stiffness can reach 106 N/m, which is much higher than the main stiffness. Excessive dynamic stiffness in the high-frequency domain will cause poor vibration isolation performance. Adding compensation bellows to the end of the original isolator may be an effective solution. Practical implications A model of the isolator containing the compensation bellows can be derived based on this analytical model. This research can also be used for dynamic modeling and vibration isolation performance analysis of a vibration isolation platform based on this bellows-type fluid viscous damper. Originality/value This paper proposed a simplified model of damping element in bellows-type fluid viscous damper, which can be used to analyze hydraulic stiffness in this damper and it was found that this damper showed stable hydraulic stiffness in the medium- and high-frequency domains.

Analytical Solution for Rotational Rub-Impact Plate Under Thermal Shock

2016 ◽  
Vol 32 (3) ◽  
pp. 297-311
Author(s):  
T.-Y. Zhao ◽  
H.-Q. Yuan ◽  
B.-B. Li ◽  
Z.-J. Li ◽  
L.-M. Liu
Keyword(s):  
Thermal Shock ◽  
High Frequency ◽  
Equations Of Motion ◽  
Low Frequency ◽  
Cantilever Plate ◽  
Analysis Method ◽  
Multiple Frequency ◽  
Width Direction ◽  
Blade Tip ◽  
High Frequency Vibrations

AbstractThe analysis method is developed to obtain dynamic characteristics of the rotating cantilever plate with thermal shock and tip-rub. Based on the variational principle, equations of motion are derived considering the differences between rubbing forces in the width direction of the plate. The transverse deformation is decomposed into quasi-static deformation of the cantilever plate with thermal shock and dynamic deformation of the rubbing plate under thermal shock. Then deformations are obtained through the calculation of modal characteristics of rotating cantilever plate and temperature distribution function. Special attention is paid to the influence of tip-rub and thermal shock on the plate. The results show that tip-rub has the characteristics of multiple frequency vibrations, and high frequency vibrations are significant. On the contrary, thermal shock shows the low frequency vibrations. The thermal shock makes the rubbing plate gradually change into low frequency vibrations. Because rub-induced vibrations are more complicated than those caused by thermal shock, tip-rub is easier to result in the destruction of the blade. The increasing friction coefficient intensifies vibrations of the rubbing plate. Minimizing friction coefficients can be an effective way to reduce rub-induced damage through reducing the surface roughness between the blade tip and the inner surface of the casing.

Sign in / Sign up

Export Citation Format

Share Document